Turbo oil drain problems w/AAM kit

Martijn_b · 04-01-2019, 09:59 AM

Quote:

Originally Posted by 370zbeast

My car is at AAM right now,getting turbos installed. I’m hoping that the fact they make the kit that there the people to install it. I’ll let the Forum knows how it goes. They assured me things have changed.

Good luck, keep us posted!

Verstuurd vanaf mijn SM-G950F met Tapatalk

370zbeast · 04-01-2019, 10:29 AM

on the dyno right now, hope not to have any issues .

JARblue · 04-01-2019, 11:34 AM

Good luck, but I wouldn't hold your breath

370zbeast · 04-01-2019, 01:51 PM

were see. I haven't had any issues with them so far. little slow but performance shops that I've dealt with in past always work at there own pace. Im new to 370s,so im learning . I can say there parts look first class but i've heard they don't make deadlines often . i can promise ill give my honest opinion when its done. i should have dyno #s this week and ill post asap

Chuck33079 · 04-01-2019, 01:52 PM

Quote:

Originally Posted by 370zbeast

on the dyno right now, hope not to have any issues .

Quote:

Originally Posted by 370zbeast

i should have dyno #s this week and ill post asap

Shouldn't you have dyno numbers today, or are they as bad at email as they are with car parts?

370zbeast · 04-01-2019, 02:13 PM

were see. I haven't had any issues with them so far. little slow but performance shops that I've dealt with in past always work at there own pace. Im new to 370s,so im learning . I can say there parts look first class but i've heard they don't make deadlines often . i can promise ill give my honest opinion when its done. i should have dyno #s this week and ill post asap

Chuck33079 · 04-01-2019, 02:15 PM

Quote:

Originally Posted by 370zbeast

were see. I haven't had any issues with them so far. little slow but performance shops that I've dealt with in past always work at there own pace. Im new to 370s,so im learning . I can say there parts look first class but i've heard they don't make deadlines often . i can promise ill give my honest opinion when its done. i should have dyno #s this week and ill post asap

Quote:

Originally Posted by 370zbeast

were see. I haven't had any issues with them so far. little slow but performance shops that I've dealt with in past always work at there own pace. Im new to 370s,so im learning . I can say there parts look first class but i've heard they don't make deadlines often . i can promise ill give my honest opinion when its done. i should have dyno #s this week and ill post asap

370zbeast · 04-01-2019, 02:23 PM

they ran in to some issues,as long as its this week ill be happy,they told me from the start it would be slow going . i wish it was moving faster but I've been dealing with shops for years I've never had a project done on time . I have talked to other shops that sell there products and the only complaint is there slow delivering the products . Were see how it goes.

JARblue · 04-01-2019, 03:00 PM

Quote:

Originally Posted by 370zbeast (10:29 AM)

on the dyno right now, hope not to have any issues.

Quote:

Originally Posted by 370zbeast (2:23 PM)

they ran in to some issues

Martijn_b · 04-01-2019, 04:03 PM

Sorry to hear! Its quite normal to have some issues after the FI build i think. Maybe some leaks etc. Did they tell you what the problem is?

Verstuurd vanaf mijn SM-G950F met Tapatalk

370zbeast · 04-01-2019, 04:55 PM

just a coolant leak, they said it difficult to get to . If thats my only problem ill be happy . i going e85 and fuel system and turbos bigger intercooler and 3 inch exhaust all the way back ,lots of things to go wrong ,so i am worried . car being in maryland and me being in west texas doesn't help. lol

sirnixalot · 04-01-2019, 05:19 PM

At least you're getting specific updates and not just "we ran into an issue"

Martijn_b · 04-11-2019, 04:34 PM

Amy news on your progress? :-)

Verstuurd vanaf mijn SM-G950F met Tapatalk

Martijn_b · 06-23-2019, 04:41 PM

Alright just an update from my side - my smoke is solved too.

I contacted MA Motorsports and purchased their kit. Thanks @urban hermit for posting about it here. And also thanks to MA, they are the type of company we all want to deal with. Perfect in communication, quality products and just very helpful.

I didnt use the RB racing pump. They are an oldschool kind of company, and probably more geared towards the walk-in crowd. I live over 5.000 miles away and their communication just wasnt great. So i went to Turbowerx and ordered their TWX300 pump. Its very quiet (even quiter than the smaller RB pump i had). Just like MA motorsports their communication was also spot on.

Wired everything up. I used a relay and the fuel pump ON signal to also turn on the scavenger pump. 500 miles without smoke so far.

You have to fiddle a bit with the power steering lines if you use the factory ones like me. Also the wheel well cover thing doesnt fit perfectly anymore because of the pump. Its fine for now but next winter ill probably relocate it to a better location.

Hope this info helps other users with similar problems

Verstuurd vanaf mijn SM-G950F met Tapatalk

URBiN~HURMiT · 06-24-2019, 06:17 PM

Quote:

Originally Posted by Martijn_b

Alright just an update from my side - my smoke is solved too.

I contacted MA Motorsports and purchased their kit. Thanks @urban hermit for posting about it here. And also thanks to MA, they are the type of company we all want to deal with. Perfect in communication, quality products and just very helpful.

I didnt use the RB racing pump. They are an oldschool kind of company, and probably more geared towards the walk-in crowd. I live over 5.000 miles away and their communication just wasnt great. So i went to Turbowerx and ordered their TWX300 pump. Its very quiet (even quieter than the smaller RB pump i had). Just like MA motorsports their communication was also spot on.

Wired everything up. I used a relay and the fuel pump ON signal to also turn on the scavenger pump. 500 miles without smoke so far.

You have to fiddle a bit with the power steering lines if you use the factory ones like me. Also the wheel well cover thing doesn't fit perfectly anymore because of the pump. Its fine for now but next winter ill probably relocate it to a better location.

Verstuurd vanaf mijn SM-G950F met Tapatalk

Thanks for your kudos ...
The TWX300 pump is quieter because it is a diaphragm type. Although they are quieter they don't have as much pumping power.
RB pumps are driven by helical gears and are 'industrial strength'
Glad to hear that it is working for you.
The MA-M kit recommended mounting place does interfere with the inner wheel well liner. They removed it on my build to better accommodate the oversize I/C and charge pipes. Looks pretty 'race car like' with the charge pipes showing out a little from the Stillen front fascia.
One last note - if you don't drive the car for a week or so you will get some initial smoke on start up because the oil does drip into the turbo.
I clears up and not to worry.

04-01-2019, 10:29 AM	#62 (permalink)
370zbeast Base Member Join Date: Dec 2015 Location: West Texas Posts: 20 Drives: 2015 370 nismo Rep Power: 10	on the dyno right now, hope not to have any issues . sirnixalot likes this.

04-01-2019, 11:34 AM	#63 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	Good luck, but I wouldn't hold your breath Chuck33079 likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

04-01-2019, 02:13 PM	#66 (permalink)
370zbeast Base Member Join Date: Dec 2015 Location: West Texas Posts: 20 Drives: 2015 370 nismo Rep Power: 10	were see. I haven't had any issues with them so far. little slow but performance shops that I've dealt with in past always work at there own pace. Im new to 370s,so im learning . I can say there parts look first class but i've heard they don't make deadlines often . i can promise ill give my honest opinion when its done. i should have dyno #s this week and ill post asap Rusty likes this.

04-01-2019, 04:03 PM	#70 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3787	Sorry to hear! Its quite normal to have some issues after the FI build i think. Maybe some leaks etc. Did they tell you what the problem is? Verstuurd vanaf mijn SM-G950F met Tapatalk URBiN~HURMiT likes this. __________________ Instagram: Boosted_Fairlady

04-01-2019, 04:55 PM	#71 (permalink)
370zbeast Base Member Join Date: Dec 2015 Location: West Texas Posts: 20 Drives: 2015 370 nismo Rep Power: 10	just a coolant leak, they said it difficult to get to . If thats my only problem ill be happy . i going e85 and fuel system and turbos bigger intercooler and 3 inch exhaust all the way back ,lots of things to go wrong ,so i am worried . car being in maryland and me being in west texas doesn't help. lol URBiN~HURMiT and Martijn_b like this.

04-01-2019, 01:51 PM	#64 (permalink)
370zbeast Base Member Join Date: Dec 2015 Location: West Texas Posts: 20 Drives: 2015 370 nismo Rep Power: 10	were see. I haven't had any issues with them so far. little slow but performance shops that I've dealt with in past always work at there own pace. Im new to 370s,so im learning . I can say there parts look first class but i've heard they don't make deadlines often . i can promise ill give my honest opinion when its done. i should have dyno #s this week and ill post asap

04-01-2019, 02:23 PM	#68 (permalink)
370zbeast Base Member Join Date: Dec 2015 Location: West Texas Posts: 20 Drives: 2015 370 nismo Rep Power: 10	they ran in to some issues,as long as its this week ill be happy,they told me from the start it would be slow going . i wish it was moving faster but I've been dealing with shops for years I've never had a project done on time . I have talked to other shops that sell there products and the only complaint is there slow delivering the products . Were see how it goes.

04-11-2019, 04:34 PM	#73 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3787	Amy news on your progress? :-) Verstuurd vanaf mijn SM-G950F met Tapatalk __________________ Instagram: Boosted_Fairlady

06-23-2019, 04:41 PM	#74 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3787	Alright just an update from my side - my smoke is solved too. I contacted MA Motorsports and purchased their kit. Thanks @urban hermit for posting about it here. And also thanks to MA, they are the type of company we all want to deal with. Perfect in communication, quality products and just very helpful. I didnt use the RB racing pump. They are an oldschool kind of company, and probably more geared towards the walk-in crowd. I live over 5.000 miles away and their communication just wasnt great. So i went to Turbowerx and ordered their TWX300 pump. Its very quiet (even quiter than the smaller RB pump i had). Just like MA motorsports their communication was also spot on. Wired everything up. I used a relay and the fuel pump ON signal to also turn on the scavenger pump. 500 miles without smoke so far. You have to fiddle a bit with the power steering lines if you use the factory ones like me. Also the wheel well cover thing doesnt fit perfectly anymore because of the pump. Its fine for now but next winter ill probably relocate it to a better location. Hope this info helps other users with similar problems Verstuurd vanaf mijn SM-G950F met Tapatalk JARblue, Rusty, madwi and 3 others like this. __________________ Instagram: Boosted_Fairlady

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Multiple problems with my FI twin turbo 370z	LJTTZ	Forced Induction	8	10-21-2016 06:19 PM
STS turbo problems...FML!!!	1_Stealth_Z	Forced Induction	21	01-16-2014 03:11 AM
oil filter mag & mag drain plug, which one and where to buy?	Z11	Nissan 370Z General Discussions	32	12-11-2013 02:54 PM
Plans of going FI down the drain	zuperman 370	Nissan 370Z General Discussions	1	08-13-2011 08:26 PM