Turbo oil drain problems w/AAM kit

Martijn_b · 06-30-2019, 05:57 PM

Experienced that little smoke tonight, it was gone soon after starting her up.

I think this can be solved by mounting a check valve in the system. So far i cant be bothered to do so though.

Verstuurd vanaf mijn SM-G950F met Tapatalk

dayhkr · 07-13-2019, 04:12 PM

Just curious but before you put the pump did you have a catch can or were you using the stock PCV setup while seeing smoke?

Martijn_b · 07-14-2019, 07:30 PM

Vent to atmosphere

Verstuurd vanaf mijn SM-G950F met Tapatalk

Girald · 02-23-2020, 09:08 PM

Quote:

Originally Posted by dayhkr

Just curious but before you put the pump did you have a catch can or were you using the stock PCV setup while seeing smoke?

clamp a 3/8 fuel rated hose to the pcv, drape it over the charge pipe (on each side) and down that little gap in the wheel well. zip tie to an anchor point and run it down to where you can lightly tie it off at the subframe. as for the CCV, its your choice. you can catch can it ( i havent caught anything from the CCV as of yet) or add a filter at the CCV and a filter at the intake PCV take off for extra intake capacity.

the pcv is not the problem at all..

Girald · 02-23-2020, 09:16 PM

im yet another with a pool of oil (mine being on the passenger side).

ive considered adding a drain plug to the charge pipe down near the IC...

others i know with the aam kit seem to sing the same song...

i might look into a scavenge pump. Its annoying that you spend a good amount of money for a lack-luster product

Martijn_b · 02-24-2020, 04:06 AM

I know, it's really frustrating. Also AAM doesnt help you in this at all and comes with some BS story about reclocking the turbos. Whilst the turbo drain design is just bad.

Put a pump in, it was about 1k and 1 day of work but all the smoking is over. My intakes are dry too

Sent from my SM-G973F using Tapatalk

URBiN~HURMiT · 02-24-2020, 06:01 PM

It's my understanding that this is a common problem with low mount turbos. With the turbos mounted low - the oil return line from the turbo to the oil pan doesn't have enough downward angle to allow gravity to do it's thing - thusly, the oil backs up into the turbo and then produces that smoke as it exits the engine via the exhaust.
Turbos mounted higher than the oil pan return don't have this problem.

Rusty · 02-24-2020, 08:32 PM

Quote:

Originally Posted by URBiN~HURMiT

It's my understanding that this is a common problem with low mount turbos. With the turbos mounted low - the oil return line from the turbo to the oil pan doesn't have enough downward angle to allow gravity to do it's thing - thusly, the oil backs up into the turbo and then produces that smoke as it exits the engine via the exhaust.
Turbos mounted higher than the oil pan return don't have this problem.

solidus · 02-24-2020, 09:26 PM

Quote:

Originally Posted by URBiN~HURMiT

It's my understanding that this is a common problem with low mount turbos. With the turbos mounted low - the oil return line from the turbo to the oil pan doesn't have enough downward angle to allow gravity to do it's thing - thusly, the oil backs up into the turbo and then produces that smoke as it exits the engine via the exhaust.
Turbos mounted higher than the oil pan return don't have this problem.

That's why Sasha did the Exa pump setup with the initial BP kits. All it takes to appreciate what that thing does is to run the car with the wiring from the Exapump jacked up. You have a whole new appreciation after flushing oil from your intercooler then having to drive around with a smoke stack till the oil burns out of your exhaust.

Rusty · 02-24-2020, 10:58 PM

Quote:

Originally Posted by solidus

That's why Sasha did the Exa pump setup with the initial BP kits. All it takes to appreciate what that thing does is to run the car with the wiring from the Exapump jacked up. You have a whole new appreciation after flushing oil from your intercooler then having to drive around with a smoke stack till the oil burns out of your exhaust.

You be a crop dustin'.

solidus · 02-24-2020, 11:52 PM

Quote:

Originally Posted by Rusty

You be a crop dustin'.

It was way worse. Looked like an LAV on the beach poppin smoke. Seriously.....actually got pulled over......in Florida ( No inspections ) ...for smoke.

URBiN~HURMiT · 02-25-2020, 05:30 PM

Quote:

Originally Posted by solidus

That's why Sasha did the Exa pump setup with the initial BP kits. All it takes to appreciate what that thing does is to run the car with the wiring from the Exapump jacked up. You have a whole new appreciation after flushing oil from your intercooler then having to drive around with a smoke stack till the oil burns out of your exhaust.

I did the scavenge pump fix as well …

zguynate · 02-27-2020, 05:57 PM

I never resolved this issue. I’m having my motor reworked by Dynosty, so I’m waiting on that to come back. I’m strongly considering selling my AAM kit and going back to the BP kit for simplicity’s sake. Since the turbo system is completely out now anyway it will be easier to swap out now.

Spooler · 02-27-2020, 06:32 PM

Quote:

Originally Posted by zguynate

I never resolved this issue. I’m having my motor reworked by Dynosty, so I’m waiting on that to come back. I’m strongly considering selling my AAM kit and going back to the BP kit for simplicity’s sake. Since the turbo system is completely out now anyway it will be easier to swap out now.

Why don't you get a Fast Intentions TT kit? Ten times better than both of those.

JARblue · 02-27-2020, 07:46 PM

AAM and BP do not belong in the same category ever. AAM products are shìt. The BP kit is solid. Don't hate.

The GT-R turbo kit husam just put out is looking pretty solid as well.

That's not to say that FI isn't the cream of the crop. But if FI is 10X better than BP, then FI is a trillion times better than AAM.

06-30-2019, 05:57 PM	#76 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3787	Experienced that little smoke tonight, it was gone soon after starting her up. I think this can be solved by mounting a check valve in the system. So far i cant be bothered to do so though. Verstuurd vanaf mijn SM-G950F met Tapatalk madwi and URBiN~HURMiT like this. __________________ Instagram: Boosted_Fairlady

07-14-2019, 07:30 PM	#78 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3787	Vent to atmosphere Verstuurd vanaf mijn SM-G950F met Tapatalk __________________ Instagram: Boosted_Fairlady

02-23-2020, 09:16 PM	#80 (permalink)
Girald Base Member Join Date: Jun 2017 Location: Denver Posts: 136 Drives: 15' 370z SpTech 6MT Rep Power: 3363	im yet another with a pool of oil (mine being on the passenger side). ive considered adding a drain plug to the charge pipe down near the IC... others i know with the aam kit seem to sing the same song... i might look into a scavenge pump. Its annoying that you spend a good amount of money for a lack-luster product __________________ AAM tt'ed // Soon: Moving back to the East Coast

02-24-2020, 04:06 AM	#81 (permalink)
Martijn_b Enthusiast Member Join Date: Jan 2018 Location: Netherlands Posts: 280 Drives: 2010 370z MB 6MT Rep Power: 3787	I know, it's really frustrating. Also AAM doesnt help you in this at all and comes with some BS story about reclocking the turbos. Whilst the turbo drain design is just bad. Put a pump in, it was about 1k and 1 day of work but all the smoking is over. My intakes are dry too Sent from my SM-G973F using Tapatalk __________________ Instagram: Boosted_Fairlady

02-24-2020, 06:01 PM	#82 (permalink)
URBiN~HURMiT Base Member Join Date: Jul 2017 Location: Northern New Jersey Posts: 156 Drives: 2009 370z 6MT Rep Power: 4621	It's my understanding that this is a common problem with low mount turbos. With the turbos mounted low - the oil return line from the turbo to the oil pan doesn't have enough downward angle to allow gravity to do it's thing - thusly, the oil backs up into the turbo and then produces that smoke as it exits the engine via the exhaust. Turbos mounted higher than the oil pan return don't have this problem. Rusty and Martijn_b like this. __________________ - -*Z&I* ~~~~

07-13-2019, 04:12 PM	#77 (permalink)
dayhkr Base Member Join Date: Aug 2017 Location: Arizona Posts: 22 Drives: 2016 Nissan 370z Rep Power: 8	Just curious but before you put the pump did you have a catch can or were you using the stock PCV setup while seeing smoke?

02-27-2020, 05:57 PM	#88 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,054 Drives: 09 370z Rep Power: 74	I never resolved this issue. I’m having my motor reworked by Dynosty, so I’m waiting on that to come back. I’m strongly considering selling my AAM kit and going back to the BP kit for simplicity’s sake. Since the turbo system is completely out now anyway it will be easier to swap out now. JARblue, Rusty, Hotrodz and 2 others like this. __________________ 2009 370z touring w/sports package

02-27-2020, 07:46 PM	#90 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	AAM and BP do not belong in the same category ever. AAM products are shìt. The BP kit is solid. Don't hate. The GT-R turbo kit husam just put out is looking pretty solid as well. That's not to say that FI isn't the cream of the crop. But if FI is 10X better than BP, then FI is a trillion times better than AAM. zguynate and Hotrodz like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Multiple problems with my FI twin turbo 370z	LJTTZ	Forced Induction	8	10-21-2016 06:19 PM
STS turbo problems...FML!!!	1_Stealth_Z	Forced Induction	21	01-16-2014 03:11 AM
oil filter mag & mag drain plug, which one and where to buy?	Z11	Nissan 370Z General Discussions	32	12-11-2013 02:54 PM
Plans of going FI down the drain	zuperman 370	Nissan 370Z General Discussions	1	08-13-2011 08:26 PM