Turtle64b's Stillen Build Thread

[370Z JT]

any 7AT supporting mods?

[turtle64b]

Originally Posted by 370Z JT

any 7AT supporting mods?

Not yet. Looking at all of the FI threads and such, the 7AT can handle about 600hp/500tq stock. With that said, I will be conservative in my approach to power by staying at least 50 below those numbers. I have no intention as of now to upgrade the pulleys or impellers to produce more power than the stock kit will make, up to 50 below the aforementioned numbers. If I find I can do so relatively safely, I will do so cautiously and tune conservatively.

[Elmo370z]

Originally Posted by turtle64b

Not yet. Looking at all of the FI threads and such, the 7AT can handle about 600hp/500tq stock. With that said, I will be conservative in my approach to power by staying at least 50 below those numbers. I have no intention as of now to upgrade the pulleys or impellers to produce more power than the stock kit will make, up to 50 below the aforementioned numbers. If I find I can do so relatively safely, I will do so cautiously and tune conservatively.

Good luck with the build. Someone out there has the A2A kit with E85 and makes 586whp on 12 psi, so the power is there. You should ditch the lightweight pulley idea and purchase an Ati racing damper in terms of reliability. Also, if you plan on making over 500 foot pounds of torque I believe , don't quote me on this but the stock auto doesn't like to see those numbers.