Topgunz - air to air upgrade

TopgunZ · 01-03-2017, 08:00 AM

The only vibration that i have heard of was from someone that had the volute touching the frame.

However, I had noticed that the tbolt clamp on the throttle body was rubbing on my hood and I was suprised i didnt hear any vibration from it. That is why I recommend using the worm drive clamps there since it is a tight fit. Check your hood in that area for any contact.

woo · 01-03-2017, 01:28 PM

i had one but it was from the buloga exhaust...it went away when i got this sweet *** deal on a slightly used fast intentions from TOPGUNZ!!!!!!

BOLIO 671 · 01-03-2017, 11:09 PM

Quote:

Originally Posted by TopgunZ

The only vibration that i have heard of was from someone that had the volute touching the frame.

However, I had noticed that the tbolt clamp on the throttle body was rubbing on my hood and I was suprised i didnt hear any vibration from it. That is why I recommend using the worm drive clamps there since it is a tight fit. Check your hood in that area for any contact.

Being that the charger is on the bracket, wouldn't that keep it off the frame? During the install I know that we double checked to ensure that the volute was not touching the frame and tried to follow the spacing as close to the pics you provided on the install manual. The vibration only happens for me on initial start up. I will double check everything again just to make sure as soon as I figure out this issue with my idle.

TBatt · 01-04-2017, 12:32 PM

Quote:

Originally Posted by BOLIO 671

Being that the charger is on the bracket, wouldn't that keep it off the frame? During the install I know that we double checked to ensure that the volute was not touching the frame and tried to follow the spacing as close to the pics you provided on the install manual. The vibration only happens for me on initial start up. I will double check everything again just to make sure as soon as I figure out this issue with my idle.

Check the clearance from the cross brace to the throttle bodies. Mine was almost touching and was causing knocks and rattles. I used 1/2 inch spacers to slightly raise the cross brace and that fixed the problem.

BOLIO 671 · 01-04-2017, 07:11 PM

Quote:

Originally Posted by TBatt

Check the clearance from the cross brace to the throttle bodies. Mine was almost touching and was causing knocks and rattles. I used 1/2 inch spacers to slightly raise the cross brace and that fixed the problem.

Found the problem...one of the T-Blolt clamps was hitting the Cross brace causing the vibration. It's not a big thing for me as its only during the initial start up. Now if I can just get this idle thing figured out.

01-03-2017, 08:00 AM	#1 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	The only vibration that i have heard of was from someone that had the volute touching the frame. However, I had noticed that the tbolt clamp on the throttle body was rubbing on my hood and I was suprised i didnt hear any vibration from it. That is why I recommend using the worm drive clamps there since it is a tight fit. Check your hood in that area for any contact. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

01-03-2017, 01:28 PM	#2 (permalink)
woo Base Member Join Date: Aug 2016 Location: lowcountry,sc Posts: 37 Drives: 16 white sport A7 Rep Power: 10	i had one but it was from the buloga exhaust...it went away when i got this sweet *** deal on a slightly used fast intentions from TOPGUNZ!!!!!! __________________ 2016 pearl white sport tech, air2air and stillen supercharger

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-09-2015 11:59 PM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 05:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 02:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 07:00 AM