Topgunz - air to air upgrade

TBatt

Is that 9 psi measured or are you just going on the fact that you have the 9 psi pulley? I'm having issues with low boost using the 9 psi pulley so I'm curious what I should be seeing with the 9 psi pulley and a2a kit.

__________________
RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

Jazz8560

Yes sir... measured.

StillenZ84

Sounds about right. Only thing I have on you is the SI impeller and extra tensioner pulley up front and I am seeing 12.3 psi. Was seeing a constant 11 psi without the extra pulley and gained over a psi just from the extra wrap from the additional pulley up front. Working with Sebz to get the tune right with my additional boost.

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34

Jazz8560

What kind of numbers are you doing bud? I'm really interested in that extra pulley as well.

StillenZ84

That's the bad thing is I still haven't been on the dyno. It's killing me not knowing my numbers and I know it's killing Topgunz. Good dynos here in OK are hard to come by. I'm 100% sure I'm over 500whp. I can hang with 650hp CTSVs, 500 plus Vettes, 335is, I beat stock hellcats, and can beat 600cc bikes. Car is so much fun to drive.

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34

BOLIO 671

I'm Subd to ur channel......Ur car is Hella quick....and hangs with the back to back runs....ur recent runs have been awesome...

__________________
2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

nic370

You got a link I'd like to see that

Sent from my SM-G920F using Tapatalk

StillenZ84

Thanks man. Yeah I just added like 15 videos the last few days. Yall should def check out what Topgunz air to air kit is capable of.

https://www.youtube.com/channel/UCoe...AgOT4KLF10zRDw

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34