Topgunz - air to air upgrade

StillenZ84

Sounds about right. Only thing I have on you is the SI impeller and extra tensioner pulley up front and I am seeing 12.3 psi. Was seeing a constant 11 psi without the extra pulley and gained over a psi just from the extra wrap from the additional pulley up front. Working with Sebz to get the tune right with my additional boost.

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34

Jazz8560

What kind of numbers are you doing bud? I'm really interested in that extra pulley as well.

StillenZ84

That's the bad thing is I still haven't been on the dyno. It's killing me not knowing my numbers and I know it's killing Topgunz. Good dynos here in OK are hard to come by. I'm 100% sure I'm over 500whp. I can hang with 650hp CTSVs, 500 plus Vettes, 335is, I beat stock hellcats, and can beat 600cc bikes. Car is so much fun to drive.

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34

BOLIO 671

I'm Subd to ur channel......Ur car is Hella quick....and hangs with the back to back runs....ur recent runs have been awesome...

__________________
2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

nic370

You got a link I'd like to see that

Sent from my SM-G920F using Tapatalk

StillenZ84

Thanks man. Yeah I just added like 15 videos the last few days. Yall should def check out what Topgunz air to air kit is capable of.

https://www.youtube.com/channel/UCoe...AgOT4KLF10zRDw

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34

nic370

Yeah man looks good
My kit is sat in the house at the moment will get round to it soon
Cheers

Sent from my SM-G920F using Tapatalk

bewhitey

I just watched all of your videos... they had me rollin! hahaha! some of those cars were so squirrely trying to keep up.

Gives me something to aspire too

__________________
Vortech SC|Stillen Sway Bars+Facia+Skirts+CB Exhaust|Z1 Clutch+CSC Elimination Kit|ACT LW Flywheel|Tein Coils+EDFC|SPL Camber Arms|RJM Clutch Pedal|TWM Short Shifter|Morimoto Switchback LED's|Z1 34 Row Oil Cooler|AIR 2 AIR|E85 Flex Fuel|460 whp TheBoostCreep

bewhitey

Has anyone tried the Z1 ported lower intake manifold

https://www.z1motorsports.com/z1-pro...hr-p-8835.html

or the EPS big bore throttle bodies with this stillen supercharger?

https://www.z1motorsports.com/air-in...hr-p-9476.html

I was going to buy both before I put top gunz's A2A kit on since that area will be all apart anyways and needs retuned once they are on too.

My A2A kit has just been sitting in my room, I am sick of looking at it!!!! need to put it on! That tial BPV does look cool though

__________________
Vortech SC|Stillen Sway Bars+Facia+Skirts+CB Exhaust|Z1 Clutch+CSC Elimination Kit|ACT LW Flywheel|Tein Coils+EDFC|SPL Camber Arms|RJM Clutch Pedal|TWM Short Shifter|Morimoto Switchback LED's|Z1 34 Row Oil Cooler|AIR 2 AIR|E85 Flex Fuel|460 whp TheBoostCreep

TopgunZ

So true. That turbo stang was all over the place trying to hang and fell back like he ran out of gas..lol...

My other favorites is the evo and his awd launch that helped him get ahead, but then how fast you came flying by him about 100 feet later was insane!!!

I laid in bed and watched every video twice last night(with sound). My wife was not impressed, but I was.

__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

TopgunZ

Holy 5hit man! I have been so busy I never got around to watching these. But damn, you are crushing some serious competition there! Glad you are able to open her up and see/show what the upgrade is capable of. Very impressive.

I was never in my car and didn't have the open road to go pound some runs like that out. I did take a 560whp ctsv, a couple 335s, m3, and a handful of sti s. Props to you for taking the vids and showing the capability.

Sooo for the dozenth time...how much is she making???

__________________
ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

StillenZ84

Lol thanks man. If all goes well and my tune is done I will be on the dyno Oct. 1

__________________
AtA SC|9 lb pulley|2.85" SC|3.47" Jack|E85|CJM S1-SE|ID1000s|Walboro 485|Zeitronix FF|Stillen CBE|AP Racing|Level 10|F.I. Flex plate|Nismo-S tune|EcuTek RaceRom|Sebz|Speed density|Haltech|3GsCustoms Dual pod a-pillar|Carbon Signal GTR gauges|Fujimura|Built| CP Pistons/Carrillo rods|PortPolishHeads/intakes|928motorsports IG: evanosteenz34

Z&I

I see you can't count past 3 but you can hit 135: :-)

__________________
.
BB