Topgunz - air to air upgrade

TopgunZ · 04-05-2016, 07:58 PM

Will do

StillenZ84 · 04-06-2016, 12:31 PM

Good luck in a few hours! 500+ all day!!

TopgunZ · 04-06-2016, 01:27 PM

Judging by the way she felt on the road Sunday, it must be into the 500's. I think the sound of the Tial gave me a 25 shot! Theres so much air coming from that monster that if I pointed it backwards it would act like a turbine and propel me forward a bit..lol.

I do have another trick up my sleeve to pick up a few more ponies. If it works well, which I am pretty sure it will, it will become a part of the kit and not add any cost.

My only worry is that since I have never dealt with the shop, they might tell me to "wait in the lobby" and I will not be able to take any video of it. I guess we will see in a few hours.

JWillis72 · 04-06-2016, 02:15 PM

Are you going to be able to before and after of your new trick or is it already on the car?

StillenZ84 · 04-06-2016, 06:14 PM

500+!!!!

JWillis72 · 04-06-2016, 06:19 PM

I'm sure he will be over 500 with E85.

Sent from my iPhone using Tapatalk

StillenZ84 · 04-06-2016, 06:23 PM

Oh he is but ill let him spill the beans haha

2016 · 04-06-2016, 06:38 PM

I've been waiting!!!! So excited to see the results!!

TopgunZ · 04-06-2016, 06:47 PM

Flash update. Not done tuning, but it made 527whp 414 tq. Had to change a few things quick. Will post final results soon.

TopgunZ · 04-06-2016, 06:52 PM

Oh left out the worst, best part!! Made that power at 6800rpm. Then, belt slip city.

jwick · 04-06-2016, 08:19 PM

Even if that's all it makes, 527/414 should be a blast to drive!

TopgunZ · 04-06-2016, 09:14 PM

I will do a full report tomorrow. But here is the graph of the best pull, or otherwise least slip. Remember I have the 9psi pulley and 3.0 sc pulley.

You can see we theorized how much can be made when I put my cog setup on. 14.5psi for 620whp.

So for the kit it seems the 3.0 is now overkill. All you need is the 9psi pulley, the a2a setup and you should make over 500whp easily.

The "trick" I used was inlet design. I did some research and development and superchargers need to gather air from all around it's volute/blades. Any bends that are close to its blades will choke it out immensely. They are very sensitive to this.

YzGyz · 04-06-2016, 11:53 PM

Wow!! Very nice numbers and stellar work!!

YzGyz

BOLIO 671 · 04-07-2016, 02:30 AM

Awesome feedback....Could you please throw some vids up as soon as possible.....We're all dying to get a peek of this beast! Any vids will do at this point...

swiss370Z · 04-07-2016, 02:32 AM

And some Pics from the Installation

BTW: Great Numbers!

04-05-2016, 07:58 PM	#121 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Will do __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-06-2016, 12:31 PM	#122 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 17	Good luck in a few hours! 500+ all day!! __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

04-06-2016, 01:27 PM	#123 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Judging by the way she felt on the road Sunday, it must be into the 500's. I think the sound of the Tial gave me a 25 shot! Theres so much air coming from that monster that if I pointed it backwards it would act like a turbine and propel me forward a bit..lol. I do have another trick up my sleeve to pick up a few more ponies. If it works well, which I am pretty sure it will, it will become a part of the kit and not add any cost. My only worry is that since I have never dealt with the shop, they might tell me to "wait in the lobby" and I will not be able to take any video of it. I guess we will see in a few hours. StillenZ84 likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-06-2016, 06:14 PM	#125 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 17	500+!!!! 2016 likes this. __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

04-06-2016, 06:23 PM	#127 (permalink)
StillenZ84 Enthusiast Member Join Date: Oct 2014 Location: OKC, OK Posts: 316 Drives: 2010 370Z 7AT S/C Rep Power: 17	Oh he is but ill let him spill the beans haha __________________ AtA SC\|9 lb pulley\|2.85" SC\|3.47" Jack\|E85\|CJM S1-SE\|ID1000s\|Walboro 485\|Zeitronix FF\|Stillen CBE\|AP Racing\|Level 10\|F.I. Flex plate\|Nismo-S tune\|EcuTek RaceRom\|Sebz\|Speed density\|Haltech\|3GsCustoms Dual pod a-pillar\|Carbon Signal GTR gauges\|Fujimura\|Built\| CP Pistons/Carrillo rods\|PortPolishHeads/intakes\|928motorsports IG: evanosteenz34

04-06-2016, 02:15 PM	#124 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	Are you going to be able to before and after of your new trick or is it already on the car?

04-06-2016, 06:19 PM	#126 (permalink)
JWillis72 A True Z Fanatic Join Date: Sep 2013 Location: Fort Myers FL Posts: 2,002 Drives: 2009 370Z yellow 7AT Rep Power: 44	I'm sure he will be over 500 with E85. Sent from my iPhone using Tapatalk

04-06-2016, 06:38 PM	#128 (permalink)
2016 Base Member Join Date: Jan 2016 Location: California Posts: 59 Drives: 14 Nissan 370Z Rep Power: 16	I've been waiting!!!! So excited to see the results!!

04-06-2016, 06:47 PM	#129 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Flash update. Not done tuning, but it made 527whp 414 tq. Had to change a few things quick. Will post final results soon. BOLIO 671, ANMVQ, YzGyz and 3 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-06-2016, 06:52 PM	#130 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	Oh left out the worst, best part!! Made that power at 6800rpm. Then, belt slip city. BOLIO 671, ANMVQ, JWillis72 and 2 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-06-2016, 08:19 PM	#131 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Even if that's all it makes, 527/414 should be a blast to drive! TopgunZ, JWillis72 and StillenZ84 like this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-06-2016, 09:14 PM	#132 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	I will do a full report tomorrow. But here is the graph of the best pull, or otherwise least slip. Remember I have the 9psi pulley and 3.0 sc pulley. You can see we theorized how much can be made when I put my cog setup on. 14.5psi for 620whp. So for the kit it seems the 3.0 is now overkill. All you need is the 9psi pulley, the a2a setup and you should make over 500whp easily. The "trick" I used was inlet design. I did some research and development and superchargers need to gather air from all around it's volute/blades. Any bends that are close to its blades will choke it out immensely. They are very sensitive to this. jwick, JARblue, EZT and 11 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 04-06-2016 at 09:17 PM.

04-06-2016, 11:53 PM	#133 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 62	Wow!! Very nice numbers and stellar work!! YzGyz TopgunZ likes this. __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

04-07-2016, 02:30 AM	#134 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Awesome feedback....Could you please throw some vids up as soon as possible.....We're all dying to get a peek of this beast! Any vids will do at this point... TopgunZ likes this. __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34 Last edited by BOLIO 671; 04-07-2016 at 03:43 PM.

04-07-2016, 02:32 AM	#135 (permalink)
swiss370Z Track Member Join Date: Jun 2011 Location: In the Mountains Posts: 649 Drives: VW UP! 1.0 Ltr Rep Power: 14	And some Pics from the Installation BTW: Great Numbers! TopgunZ likes this. __________________ /// ONE LAST RIDE /// R.I.P. FAIRLADY Z ///

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-09-2015 11:59 PM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 05:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 02:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 07:00 AM