Topgunz - air to air upgrade

jwick · 05-18-2016, 09:29 AM

Quote:

Originally Posted by TBatt

My buddy's 650whp Supra is down right scary! He has a big single turbo and a modified GM 400 tranny. It is LOUD and very fast! He is running street drag radials and can smoke them in every gear. It is like being transported by a warp drive machine!

I call it STUPID FAST!......he agrees

That qualifies as stupid fast. Mine car was tuned with 95deg shop temps at 510whp. When it's below 50 I bet it's closer to 530-540. A good third gear pull in cooler weather is a little scary. STUPID FAST is right.

TopgunZ · 05-18-2016, 09:59 AM

I just put my Brand New R888's up for sale. They are 315/30/20's. Tires can make the difference in "I put a ****-load of money into a car that doesn't seem fast because it just sits and spins"...or "this car plants you in your seat from 2nd up"

My Mickey Thompson Street Comps are 305/35/20's and they look MASSIVE on there and hook really good for the price.

And who wants a barely used Stillen oil cooler for cheap?

I have so much extra stuff laying around my garage its absurd.

TopgunZ · 05-18-2016, 10:03 AM

T-batt. Do you want a kit shipped to you next week?

TBatt · 05-18-2016, 10:06 AM

Quote:

Originally Posted by TopgunZ

T-batt. Do you want a kit shipped to you next week?

Works for me if you have one ready! I got the $$ set aside for this.

YzGyz · 05-18-2016, 04:37 PM

I can hook in 3rd with the s04. My rear camber is at -.05* though.

YzGyz

StillenZ84 · 05-18-2016, 11:02 PM

Got a few logs in today. Should be finishing up by this weekend. Noticed my BOV was a little louder on the way home and was like great what did I do. Well got home and found my breather with the top blown off that helped quite down the Tial. This setup is pushing some major air if you ask me. haha

BOLIO 671 · 05-19-2016, 05:35 AM

Topz when is your next set of kits gonna be available?

ANMVQ · 05-19-2016, 09:15 AM

Never seen that before :/ LOL

TopgunZ · 05-19-2016, 03:48 PM

I will have 7 kits ready by next week. 5 of which are spoken for.

mikey1600 · 05-20-2016, 04:50 AM

Quote:

Originally Posted by TopgunZ

I will have 7 kits ready by next week. 5 of which are spoken for.

waiting on that shipping price

milkcow500 · 05-20-2016, 01:45 PM

Quote:

Originally Posted by ANMVQ

Question what does you KR look like> Ignition correction?

I was looking through my logs in Excel, since I was bored and curious. Looks like ignition correction is consistently 0 in all my logs.

I just did a couple more WOT runs and my AFR looks like it's sitting mostly in the 11s, which is for the most part good. I'm kind of overwhelmed by the WOT procedure, but I'm getting the hang of it. It doesn't help when my hood is erratically shaking at redline like it wants to pop off.

Pauly Z · 05-20-2016, 01:54 PM

Quote:

Originally Posted by milkcow500

I was looking through my logs in Excel, since I was bored and curious. Looks like ignition correction is consistently 0 in all my logs.

I just did a couple more WOT runs and my AFR looks like it's sitting mostly in the 11s, which is for the most part good. I'm kind of overwhelmed by the WOT procedure, but I'm getting the hang of it. It doesn't help when my hood is erratically shaking at redline like it wants to pop off.

Do you have an aftermarket wideband gauge? Cause the stock Narrow band sensors only read to 11.12. You wouldn't know if you were more rich than that without wideband.

Sent from my SM-N920V using Tapatalk

milkcow500 · 05-20-2016, 02:20 PM

Lowest it goes to is 11.15. I do have an aftermarket innovate gauge, but I'm having a really weird issue with it (It was calibrated when installed and is located after my driver side primary). It looks like the AFR readings are really off, but if I switch it to Lambda, the readings seem 'more' correct. For example - 3rd gear, 6k rpms = .76 Lambda OR 6.8 AFR.

StillenZ84 · 05-20-2016, 02:37 PM

Quote:

Originally Posted by milkcow500

I was looking through my logs in Excel, since I was bored and curious. Looks like ignition correction is consistently 0 in all my logs.

I just did a couple more WOT runs and my AFR looks like it's sitting mostly in the 11s, which is for the most part good. I'm kind of overwhelmed by the WOT procedure, but I'm getting the hang of it. It doesn't help when my hood is erratically shaking at redline like it wants to pop off.

Yeah ignition correction is good when it stays 0 the whole time. If there was any knock being detected it would read -1, -2, -3 and so on. 0 is good. The stock 02 sensors read quite a bit higher compared to a wide-band. If it is reading 11's on the logs then it is realistically close to 10's which is really rich. Better rich than lean but he will definitely get you dialed in.

milkcow500 · 05-20-2016, 02:45 PM

Yeah, I need to get this gauge fixed up regardless. Here are my WOT runs for those interested. https://youtu.be/wkJRjl9W52g

05-18-2016, 09:59 AM	#482 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	I just put my Brand New R888's up for sale. They are 315/30/20's. Tires can make the difference in "I put a **-load of money into a car that doesn't seem fast because it just sits and spins"...or "this car plants you in your seat from 2nd up" My Mickey Thompson Street Comps are 305/35/20's and they look MASSIVE on there and hook really good for the price. And who wants a barely used Stillen oil cooler for cheap? I have so much extra stuff laying around my garage its absurd. Masterbeatty likes this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM** Last edited by TopgunZ; 05-18-2016 at 10:06 AM.

05-18-2016, 10:03 AM	#483 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	T-batt. Do you want a kit shipped to you next week? __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

05-18-2016, 04:37 PM	#485 (permalink)
YzGyz A True Z Fanatic Join Date: Jun 2013 Location: Houston Posts: 1,449 Drives: 2010 Nismo Rep Power: 62	I can hook in 3rd with the s04. My rear camber is at -.05* though. YzGyz __________________ http://www.the370z.com/members-370z-...gyzs-turn.html YzGyz

05-19-2016, 05:35 AM	#487 (permalink)
BOLIO 671 A True Z Fanatic Join Date: Mar 2010 Location: GUAHAN Posts: 1,198 Drives: To & From then Back Rep Power: 3399	Topz when is your next set of kits gonna be available? __________________ 2013 Nismo Z34 / FI TT #091 / IG: @lilzilla_z34

05-19-2016, 09:15 AM	#488 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Never seen that before :/ LOL StillenZ84 likes this. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

05-19-2016, 03:48 PM	#489 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	I will have 7 kits ready by next week. 5 of which are spoken for. Jazz8560, TBatt, YzGyz and 1 others like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

05-20-2016, 02:20 PM	#493 (permalink)
milkcow500 Base Member Join Date: May 2015 Location: NYC Posts: 176 Drives: 11 G37xs Rep Power: 43	Lowest it goes to is 11.15. I do have an aftermarket innovate gauge, but I'm having a really weird issue with it (It was calibrated when installed and is located after my driver side primary). It looks like the AFR readings are really off, but if I switch it to Lambda, the readings seem 'more' correct. For example - 3rd gear, 6k rpms = .76 Lambda OR 6.8 AFR.

05-20-2016, 02:45 PM	#495 (permalink)
milkcow500 Base Member Join Date: May 2015 Location: NYC Posts: 176 Drives: 11 G37xs Rep Power: 43	Yeah, I need to get this gauge fixed up regardless. Here are my WOT runs for those interested. https://youtu.be/wkJRjl9W52g BOLIO 671, swiss370Z, TBatt and 1 others like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-09-2015 11:59 PM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 05:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 02:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 07:00 AM