Topgunz - air to air upgrade

StillenZ84 · 04-23-2016, 12:29 PM

Quote:

Originally Posted by EVOHUNTER

Hey Stillenz84, hows the flutter at part throttle with that BPV?

Flutter isnt bad but the Tial does stay open in every gear till around 2000 rpm light throttle. I occasionally get some flutter around 2200 rpm but not too often. It is definitely loud. haha Turns plenty of heads. Im working this weekend on adding some padding to places that the pipe is hitting the frame because it is tirggering my knock sensor and havent been able to get but a few good log for Seb. I have hit 9 psi at 6000 rpm and the car is a whole other animal with the new kit.

BOLIO 671 · 04-23-2016, 08:43 PM

Quote:

Originally Posted by StillenZ84

Flutter isnt bad but the Tial does stay open in every gear till around 2000 rpm light throttle. I occasionally get some flutter around 2200 rpm but not too often. It is definitely loud. haha Turns plenty of heads. Im working this weekend on adding some padding to places that the pipe is hitting the frame because it is tirggering my knock sensor and havent been able to get but a few good log for Seb. I have hit 9 psi at 6000 rpm and the car is a whole other animal with the new kit.

What psi were u hitting before?

StillenZ84 · 04-24-2016, 01:39 PM

Quote:

Originally Posted by BOLIO 671

What psi were u hitting before?

I was just under 10 psi at redline before.

BOLIO 671 · 04-24-2016, 06:58 PM

Quote:

Originally Posted by StillenZ84

I was just under 10 psi at redline before.

Nice so ur hitting boost earlier @ 9psi @6K rpm.....hopefully those padding did the trick so u can get some clean pulls for ur Data Logs....What are ur intake temps looking like? Are they close to ambient?

TopgunZ · 04-22-2016, 11:17 AM

Anyone have the serpentine belt number for the kit by chance? I want to put a new one on for the dyno just in case. Hoping to order at work so it can ship today.

EVOHUNTER · 04-22-2016, 12:46 PM

Quote:

Originally Posted by TopgunZ

Anyone have the serpentine belt number for the kit by chance? I want to put a new one on for the dyno just in case. Hoping to order at work so it can ship today.

When I get home I can get you the belt number, I found a gater back belt in the same size.

swiss370Z · 04-22-2016, 01:05 PM

Quote:

Originally Posted by TopgunZ

Anyone have the serpentine belt number for the kit by chance? I want to put a new one on for the dyno just in case. Hoping to order at work so it can ship today.

Hey Sir

If you like the compressor side, then there is only this page:

MAGNUSON SUPERCHARGERS GATES MIRCO-V AUX BELT REAR 8-RIB Gates K080220 [M-79-08-02-020] - $30.50

Otherwise, here the Belt-Type of the engine:

Micro-V AT® Belts Listed by Number:
Gates MICRO-V AT K071045

Hope I could help you?...

Greetings from Switzerland
Ivo

TopgunZ · 04-22-2016, 01:13 PM

That's the one! Thanks Swiss

swiss370Z · 04-22-2016, 01:22 PM

Quote:

Originally Posted by TopgunZ

That's the one! Thanks Swiss

I have received already 1000 Information in this forum!

Whenever I can help, then I will!

Wish you a great weekend

Pauly Z · 04-22-2016, 01:18 PM

Now if only someone would help with a filter.

Sent from my SM-N920V using Tapatalk

EVOHUNTER · 04-22-2016, 01:23 PM

What about this one?

K&N RC-8180 Universal Chrome Filter, Universal Air Filters

or search through here:

find the specs you need.

http://www.knfilters.com/search/univcone.aspx

Pauly Z · 04-22-2016, 02:22 PM

That was a good try. I appreciate the help. We only have room for a filter about 2.5".

Sent from my SM-N920V using Tapatalk

TopgunZ · 04-22-2016, 02:46 PM

I was hoping you would look and possibly come across an even better one. I pm'd you the part number.

I really wish a mushroom style HKS would fit. I think we would gain a full psi out of it. I broke one trying. I might modify one just cuz.

Pauly Z · 04-22-2016, 03:26 PM

Yeah I couldn't even find the one you have. I was about to call k and n to see about one custom made.

Sent from my SM-N920V using Tapatalk

TopgunZ · 04-22-2016, 03:31 PM

I already tried that. I emailed a pdf with a full drawing with dimensions with wide tolerances and they replied back with a link to their "select a size" page..lol.

04-22-2016, 11:17 AM	#5 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	Anyone have the serpentine belt number for the kit by chance? I want to put a new one on for the dyno just in case. Hoping to order at work so it can ship today. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-22-2016, 01:13 PM	#8 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	That's the one! Thanks Swiss 370Zsteve and swiss370Z like this. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-22-2016, 01:18 PM	#10 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 13	Now if only someone would help with a filter. Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

04-22-2016, 01:23 PM	#11 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 16	What about this one? K&N RC-8180 Universal Chrome Filter, Universal Air Filters or search through here: find the specs you need. http://www.knfilters.com/search/univcone.aspx __________________

04-22-2016, 02:22 PM	#12 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 13	That was a good try. I appreciate the help. We only have room for a filter about 2.5". Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

04-22-2016, 02:46 PM	#13 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	I was hoping you would look and possibly come across an even better one. I pm'd you the part number. I really wish a mushroom style HKS would fit. I think we would gain a full psi out of it. I broke one trying. I might modify one just cuz. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

04-22-2016, 03:26 PM	#14 (permalink)
Pauly Z Base Member Join Date: Apr 2014 Location: Sylvester, Ga. Posts: 197 Drives: '10 370Z 7AT Rep Power: 13	Yeah I couldn't even find the one you have. I was about to call k and n to see about one custom made. Sent from my SM-N920V using Tapatalk __________________ Custom Air to Air Stillen SC Setup, CJM S-1S FRS, ID1000 Injectors, Aeromotive 340 Stealth Pump, Test Pipes, Topspeed Exhaust, Z1 Oil Pan Spacer, Swift Springs, Adjustable Rear Camber Arms, 20 and 25mm Spacers, Custom Gauges, and Ecutek

04-22-2016, 03:31 PM	#15 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	I already tried that. I emailed a pdf with a full drawing with dimensions with wide tolerances and they replied back with a link to their "select a size" page..lol. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-09-2015 11:59 PM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 05:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 02:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 07:00 AM