Thank. I've actually already been in talks with Stillen trying to get all the necessary parts worked out.

Anyone have the serpentine belt number for the kit by chance? I want to put a new one on for the dyno just in case. Hoping to order at work so it can ship today.

When I get home I can get you the belt number, I found a gater back belt in the same size.

Yeah, I'm scared to even try that 10lb pulley. I think 8 would be plenty for me with a2a and e85. And, you're correct about the 1000cc injectors. I completely didn't take into account how much extra it would have to flow to achieve the proper fuel. Good thing they cost the same at the 725s.

So, it looks like I'll be adding the CJM S1 kit. Not too bad of a price, especially since the first one I saw was the S1-S. Anything else I need to get everything finished in one swoop?

Hey Sir

If you like the compressor side, then there is only this page:

MAGNUSON SUPERCHARGERS GATES MIRCO-V AUX BELT REAR 8-RIB Gates K080220 [M-79-08-02-020] - $30.50

Otherwise, here the Belt-Type of the engine:

Micro-V AT® Belts Listed by Number:
Gates MICRO-V AT K071045

Hope I could help you?...

Greetings from Switzerland
Ivo

That's the one! Thanks Swiss

Now if only someone would help with a filter.

Sent from my SM-N920V using Tapatalk

I have received already 1000 Information in this forum! :tup::tup::tup:
Whenever I can help, then I will!

Wish you a great weekend

What about this one?

K&N RC-8180 Universal Chrome Filter, Universal Air Filters

or search through here:

find the specs you need.

http://www.knfilters.com/search/univcone.aspx

That was a good try. I appreciate the help. We only have room for a filter about 2.5".

Sent from my SM-N920V using Tapatalk

I was hoping you would look and possibly come across an even better one. I pm'd you the part number.

I really wish a mushroom style HKS would fit. I think we would gain a full psi out of it. I broke one trying. I might modify one just cuz.

Yeah I couldn't even find the one you have. I was about to call k and n to see about one custom made.

Sent from my SM-N920V using Tapatalk

I already tried that. I emailed a pdf with a full drawing with dimensions with wide tolerances and they replied back with a link to their "select a size" page..lol.

Well she started. But have some issues.

https://youtu.be/FkweeNURGhk

Sent from my SM-N920V using Tapatalk

It's throwing some codes (P010C, P1092) and there is absolutely no throttle. Tried the relearn several times but don't think it is taking. Looked at the logs and bank 2 Maf is 0. Going to have to play with it tomorrow.

Sent from my SM-N920V using Tapatalk