Topgunz - air to air upgrade

redondoaveb · 01-03-2018, 07:15 PM

Quote:

Originally Posted by BOLIO 671

Awesome+!!!! What work did u have done to ur blower st 928 Ben?

I believe he has the "super vortech" kit installed.

https://928motorsports.com/parts/super_vortech.php

Bens98gagt · 01-03-2018, 07:23 PM

Quote:

Originally Posted by redondoaveb

I believe he had the "super vortech" kit installed.

https://928motorsports.com/parts/super_vortech.php

Yes sir...

BOLIO 671 · 01-04-2018, 01:22 AM

Quote:

Originally Posted by redondoaveb

I believe he has the "super vortech" kit installed.

https://928motorsports.com/parts/super_vortech.php

Quote:

Originally Posted by Bens98gagt

Yes sir...

Ahhhhh....I see.....the same set up that Evan did.....Very Sweeeet....

jaytirbhaw · 01-02-2018, 05:58 PM

ALMOST makes me wanna go supercharger vs my custom turbo build // nice work topgun !

Senna-F1 · 01-02-2018, 06:00 PM

All with the stock hood and strut tower brace! Haha

Sent from my iPhone using Tapatalk

Bens98gagt · 01-02-2018, 11:23 PM

Quote:

Originally Posted by Senna-F1

All with the stock hood and strut tower brace! Haha

Sent from my iPhone using Tapatalk

Ultimate Sleeper baby...😜

TopgunZ · 01-02-2018, 07:57 PM

There's a full SC kit heading in SOHOs direction. Already have some parts en route. It will be a "mild" build keeping the whp under 500 and wheel torque under 400 due to it being an auto trans. Should be great feedback for those AT guys though.

Bens98gagt · 01-02-2018, 11:25 PM

Quote:

Originally Posted by TopgunZ

There's a full SC kit heading in SOHOs direction. Already have some parts en route. It will be a "mild" build keeping the whp under 500 and wheel torque under 400 due to it being an auto trans. Should be great feedback for those AT guys though.

Evan is on a AT and doing over 700 to so it can be done... 😉

TopgunZ · 01-03-2018, 09:38 AM

Quote:

Originally Posted by Bens98gagt

Evan is on a AT and doing over 700 to so it can be done... 😉

I am talking on the stock tranny and not shelling out 5K for a built one.

Bens98gagt · 01-03-2018, 07:24 PM

Quote:

Originally Posted by TopgunZ

I am talking on the stock tranny and not shelling out 5K for a built one.

Oh yeah thats right I forgot he is on a built AT...

MoulaZ · 01-06-2018, 04:33 PM

Just finished installing my TBatt pulley and belt, super easy install. But I'm noticing a moderately audible whine now, between 1-4K RPM. Probably higher as well but exhaust drowns it out.

Is this to be expected, or is something else going on now?

TBatt · 01-08-2018, 02:08 PM

Quote:

Originally Posted by MoulaZ

Just finished installing my TBatt pulley and belt, super easy install. But I'm noticing a moderately audible whine now, between 1-4K RPM. Probably higher as well but exhaust drowns it out.

Is this to be expected, or is something else going on now?

No, it is not expected with the kit. What is your belt tensioner looking like?

It should look like mine in the picture.

MoulaZ · 01-10-2018, 04:10 AM

This is mine.

TBatt · 01-10-2018, 01:44 PM

Close enough.

What kind of noise is it making? You said a whine but that could be alternator noise.

The only other person that reported a noise was because the belt needed to be broken in. The edge left by cutting off one rib isn't as smooth as the factory cut so it may just need to run for awhile and get broken in.

MoulaZ · 01-11-2018, 01:49 AM

Hard to explain, and will try and get a clip but the best I could describe is like when an idler pulley is on it's way out.

I did notice a little bit of green on the very 1-2mm edge of the idler pulley you supply when installed. Easily rubbed off with a finger though.

01-02-2018, 05:58 PM	#4 (permalink)
jaytirbhaw Track Member Join Date: Dec 2009 Location: NYC Posts: 814 Drives: 350z HR , Nismo 370z Rep Power: 17	ALMOST makes me wanna go supercharger vs my custom turbo build // nice work topgun ! __________________ 2014 Nismo #350 , Built Motor, Top Mount Single Turbo .... 620 whp/ 500 lbs wtq 2012 Track/Drift Z, build coming soon. Build Thread - http://www.the370z.com/members-370z-...70z-build.html

01-02-2018, 06:00 PM	#5 (permalink)
Senna-F1 Enthusiast Member Join Date: Jun 2016 Location: Cary, NC Age: 54 Posts: 425 Drives: 370SC,EliseSC,MR2T Rep Power: 51	All with the stock hood and strut tower brace! Haha Sent from my iPhone using Tapatalk __________________ 618 WHP.452 WTQ.4" Python Intake.15 psi.e50.Topgunz SC.SOHO Tune.S1SE.STG 4 Clutch.Motordyne LTH/Test Pipes/Exhaust.485 Pump.1050x

01-02-2018, 07:57 PM	#7 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6835	There's a full SC kit heading in SOHOs direction. Already have some parts en route. It will be a "mild" build keeping the whp under 500 and wheel torque under 400 due to it being an auto trans. Should be great feedback for those AT guys though. __________________ ROTREX SUPERCHARGER TUNER KITS - $6799/ CUSTOM STILLEN AIR TO AIR KITS -$2100/ 700+ WHP!! WWW.TOPGUNSPEEDWORKS.COM Last edited by TopgunZ; 01-02-2018 at 08:05 PM.

01-10-2018, 01:44 PM	#14 (permalink)
TBatt Track Member Join Date: Apr 2013 Location: Huntsville, AL Posts: 832 Drives: 2019 GT-R Rep Power: 20169	Close enough. What kind of noise is it making? You said a whine but that could be alternator noise. The only other person that reported a noise was because the belt needed to be broken in. The edge left by cutting off one rib isn't as smooth as the factory cut so it may just need to run for awhile and get broken in. __________________ RJM pedal, Hotchkis Sway Bars, FI TDX, FOG Light, Z1 Slotted Drilled rotors, Stillen SC, Quaife ATB, Z1 Oil cooler, AEM Gauge Set, Galeforce gauge mount, Avant Garde M590 Hypersilver w/RE-11, TopgunZ A2A kit., ECUtek tuned by Seb: ROLL TIDE!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best upgrade/mod for 200-300$?	louiey370z	Engine & Drivetrain	10	06-09-2015 11:59 PM
Upgrade?	Dzel	Other Vehicles	83	03-08-2014 05:55 PM
Upgrade	Darryl79	New Roadster 370Z Owner	7	08-23-2012 02:21 PM
Big 3 upgrade ???	dbkustomz	Audio & Video	6	06-30-2012 07:00 AM

01-06-2018, 04:33 PM	#11 (permalink)
MoulaZ Base Member Join Date: Jun 2013 Location: Sydney, Australia Posts: 230 Drives: '09 Z34 BP Turbo V2 Rep Power: 26	Just finished installing my TBatt pulley and belt, super easy install. But I'm noticing a moderately audible whine now, between 1-4K RPM. Probably higher as well but exhaust drowns it out. Is this to be expected, or is something else going on now?

01-11-2018, 01:49 AM	#15 (permalink)
MoulaZ Base Member Join Date: Jun 2013 Location: Sydney, Australia Posts: 230 Drives: '09 Z34 BP Turbo V2 Rep Power: 26	Hard to explain, and will try and get a clip but the best I could describe is like when an idler pulley is on it's way out. I did notice a little bit of green on the very 1-2mm edge of the idler pulley you supply when installed. Easily rubbed off with a finger though.