BP V 2.0 turbo kits...ROUND 3 place your order now

TheWeez · 04-08-2016, 10:09 AM

Quote:

Originally Posted by Boosted Performance

Gentlemen, there is absolutely no issues with driving the car for an extended period of time on the base map. It is derived from a BP twin scrolled car tuned to 10psi of boost.

I would however strongly dicourage wide open throttle pulls before a custom tune is done. There could be slight variances in each car thar could impact the tune compatability, which could lead to damage to the engine.

So don't hesitate to drive the cars on these base maps, just don't abuse them until they are properly tuned on a dyno.

So is it necessary to get the Ecu part number because I don't own a Windows computer, will a standard tune work for me if I'm only driving 4 miles to my tuner

Boosted Performance · 04-08-2016, 10:36 AM

Quote:

Originally Posted by TheWeez

So is it necessary to get the Ecu part number because I don't own a Windows computer, will a standard tune work for me if I'm only driving 4 miles to my tuner

If you are getting a base map from me, then yes, I need the ECU part number....just the way UpRev works.

Not sure what a "standard tune" is.

I can't remember that UpRev only uses Windows OS...if so, maybe borrowing a friends laptop would be a possible solution.

solidus · 04-08-2016, 02:20 PM

Quote:

Originally Posted by TheWeez

So is it necessary to get the Ecu part number because I don't own a Windows computer, will a standard tune work for me if I'm only driving 4 miles to my tuner

Uprev only works with windows. Do yourself a huge favor and get a refurbished Surface Pro running windows 8. Ive been looking for one lately because I did my Titan, G37 and the Z with a 15" laptop and its a PITA. Any tablet that runs full windows 8 and make sure its over 8" unless you get a stylus or have really skinny fingers.

EliteXpress · 04-09-2016, 12:32 AM

Now with just 1,700 miles on the odometer had Fast Intentions TDXCat Back Exhaust, Z1 Clutch W/ 6 Puck, Light Weight Flywheel, ZSpeed CSC, and some fresh Rotella T6 oil installed Today!

TcRocket · 04-09-2016, 02:14 AM

Quote:

Originally Posted by EliteXpress

Now with just 1,700 miles on the odometer had Fast Intentions TDXCat Back Exhaust, Z1 Clutch W/ 6 Puck, Light Weight Flywheel, ZSpeed CSC, and some fresh Rotella T6 oil installed Today!

Let me know how that Six puck drives bro........

EliteXpress · 04-09-2016, 02:35 AM

Quote:

Originally Posted by TcRocket

Let me know how that Six puck drives bro........

I can already tell you bang for the buck you can't go wrong, this clutch pretty much feels stock for the most part. I really thought it was going to be a night and day difference, but it's not. A little grabby in first gear but not by much with a little chatter once warm in neutral, other than that she's good to go!

jwick · 04-09-2016, 09:01 AM

Quote:

Originally Posted by EliteXpress

I can already tell you bang for the buck you can't go wrong, this clutch pretty much feels stock for the most part. I really thought it was going to be a night and day difference, but it's not. A little grabby in first gear but not by much with a little chatter once warm in neutral, other than that she's good to go!

That's basically my report on their full face disk. Stock engagement, easy shifts, loud as hell and pressure about 50% stouter than stock.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Your favorite place to order wire online?	madwi	The Lounge (Off Topic)	11	06-22-2014 10:29 AM
anyone know a place in the GTA that makes CUSTOM body kits?	Z11	Canada	3	07-10-2012 05:53 PM
Can't place order for new Z	texunsam	Nissan 370Z Pricing / Ordering Discussions	9	01-28-2011 06:27 PM
OEM spoiler... best place to order from? Any non-OEM alternatives?	rl in florida	Exterior & Interior	1	12-18-2009 12:23 PM