Window Tint peeling issue

antman22 · 07-02-2010, 10:05 AM

whoo hoo, got a call from Nissan consumers affairs and they told me they can't do anything about this and that i would have to deal with the dealership myself! they are SO much help ::sarcasm:: the reason they give is that window tint is aftermarket that the dealership does, so its out of nissan's hands.

The dealership told consumer affairs that they won't do any additional repairs (even though they failed to properly fix it the first 3 times....), so I don't even know what's the point in me trying to persue this...

note to self: never getting any service or future vehicles from Courtesy Nissan of Richardson again.

GTLAW · 08-07-2010, 04:49 PM

sounds like **** Tent job to me!

tdehtorp · 09-07-2010, 04:21 PM

Quote:

Originally Posted by CBRich

You played the cute girl thing wrong. You should have told her that your sports car was at home but you were driving the Versa to "be green."

Matthew · 10-22-2010, 10:56 PM

I had the same problem with corner peeling. the windows crack up and down when the door opens so I unhooked the window buttons and got them retinted. Waited 4 days hooked the buttons back up. Problem fixed

SophiaZ · 10-25-2010, 11:15 AM

How do you unhook the window buttons?

USMCASA · 10-26-2010, 03:11 PM

just got mine done last week no problems yet

memorylasts · 10-26-2010, 03:16 PM

tell whoever is tinting your windows to put some extra heat around the edges as the window moves, i have had no problems... I also didn't have the dealership do it.

alejo · 02-17-2011, 12:05 PM

I've had this problem for the past 4 weeks, this is such an inconvinience. I'm going back tomorrow to get my windows done again for the 3rd time... it keeps on pealing off. Can i just somehow unhook the window going up and down when i open my door and leave it like that for a week... will it hurt anything if i keep driving the car during this condition. dont want to break anything

Slynky · 02-17-2011, 01:05 PM

Don't know. The guys who put mine on put it below the rubber line. They said they have to do it for Mustangs, too. It was no big deal to them that the window went down.

You can push in a little button on the door frame (frame of the car) and it will stay up. Don't know if you can rig something up to hold it down, though.

odie99 · 02-17-2011, 08:25 PM

As soon as you start to unscrew the door button it breaks the ground and causes the windows to go fully up. This is what we did to tint my windows. Make sure they use a quality tint and heat it up properly. I did get mine done at the dealer where I work, and it's been nearly 2 months with no problems. Rolled the windows down two days later and everything.

Jme370 · 03-01-2011, 12:47 PM

You can also just put a piece of tape over the button. My installer did that and said he has never had a problem with auto sealing doors. He also did say that he heats up the bottom a bit more to make sure it sticks.

MVPTonyD · 03-07-2011, 12:52 AM

I thought this was only me! wow. i need to go get this check.

omgZ · 03-07-2011, 03:33 AM

I have life time warranty on my tint, and the tint guy had to redo the driver side. I believe he said it is a common problem with the z because there is something inside of the door that wears on the corner of the tint (heat gun was used both times). The guy didn't have to remove the door panels. He only removed the inside weather strip(not sure what its called). Mine slowly began to peel after a couple of months, but i think he trimmed a bit more the second time so the tint wouldn't touch that area. I am not 100% sure if what he said was true lol, but it isn't peeling anymore. I hope this helps.

Jme370 · 03-09-2011, 07:44 PM

FYI...the peeling issue can be avoided the first time you get your windows tinted. Below the weather strip on both doors, there is a little plastic piece in the front corner. The tint must be installed inside (underneath, depending on how you look at it) this plastic piece or else the tint will peel every time. If you pull back the weather stripping, you can see what I am talking about.

EazyD · 04-13-2011, 02:27 PM

Driver's side window was peeling. I just cut the loose part with a razor. So it's missing a triangle in the front corner, but nobody notices. It at least keeps it from getting worse and from having to re-tint (previous owner, some faraway shop did it)

08-07-2010, 04:49 PM	#62 (permalink)
GTLAW Enthusiast Member Join Date: Jun 2010 Location: Columbia MD Posts: 373 Drives: Black ??? Rep Power: 14	sounds like **** Tent job to me! __________________ 2013 6MT IPL GrSh\|V-Leds\|OSRAM \| SWIFT \| H&R \| CUSCO \| HKS \| 3M \|

10-26-2010, 03:16 PM	#67 (permalink)
memorylasts A True Z Fanatic Join Date: Mar 2010 Location: San Diego Posts: 1,125 Drives: Cars... Rep Power: 17	tell whoever is tinting your windows to put some extra heat around the edges as the window moves, i have had no problems... I also didn't have the dealership do it. __________________ somewhat-journal-thingy

02-17-2011, 01:05 PM	#69 (permalink)
Slynky Track Member Join Date: Oct 2009 Location: McDonough, GA Posts: 595 Drives: 2010 Red 370Z T/S/N Rep Power: 16	Don't know. The guys who put mine on put it below the rubber line. They said they have to do it for Mustangs, too. It was no big deal to them that the window went down. You can push in a little button on the door frame (frame of the car) and it will stay up. Don't know if you can rig something up to hold it down, though. __________________ A veteran is someone who, at one point in their life, wrote a blank check made payable to "The United States of America," for an amount of "up to and including my life."

02-17-2011, 08:25 PM	#70 (permalink)
odie99 Base Member Join Date: Dec 2010 Location: Earth Posts: 89 Drives: flip flops Rep Power: 14	As soon as you start to unscrew the door button it breaks the ground and causes the windows to go fully up. This is what we did to tint my windows. Make sure they use a quality tint and heat it up properly. I did get mine done at the dealer where I work, and it's been nearly 2 months with no problems. Rolled the windows down two days later and everything. __________________

03-01-2011, 12:47 PM	#71 (permalink)
Jme370 Base Member Join Date: Aug 2009 Location: Orlando, FL Posts: 81 Drives: 10 370z Roadster Rep Power: 15	You can also just put a piece of tape over the button. My installer did that and said he has never had a problem with auto sealing doors. He also did say that he heats up the bottom a bit more to make sure it sticks. __________________ 2010 370ZR Touring <PG/Blk 6 spd>Sport.Mats.Kicks. Sold.2009 370Z Touring<MB/Grey 6spd>Mats.Aero.Nav.

07-02-2010, 10:05 AM	#61 (permalink)
antman22 Track Member Join Date: Dec 2009 Location: Dallas TX Posts: 597 Drives: 09 PG 370z 7AT Rep Power: 16	whoo hoo, got a call from Nissan consumers affairs and they told me they can't do anything about this and that i would have to deal with the dealership myself! they are SO much help ::sarcasm:: the reason they give is that window tint is aftermarket that the dealership does, so its out of nissan's hands. The dealership told consumer affairs that they won't do any additional repairs (even though they failed to properly fix it the first 3 times....), so I don't even know what's the point in me trying to persue this... note to self: never getting any service or future vehicles from Courtesy Nissan of Richardson again.

10-22-2010, 10:56 PM	#64 (permalink)
Matthew Track Member Join Date: Apr 2010 Location: Clemson, SC Posts: 519 Drives: Red Rocket Rep Power: 16	I had the same problem with corner peeling. the windows crack up and down when the door opens so I unhooked the window buttons and got them retinted. Waited 4 days hooked the buttons back up. Problem fixed

10-25-2010, 11:15 AM	#65 (permalink)
SophiaZ A True Z Fanatic Join Date: Dec 2009 Location: South Jersey Posts: 1,463 Drives: 2020 50th anniv 7AT Rep Power: 6732	How do you unhook the window buttons?

10-26-2010, 03:11 PM	#66 (permalink)
USMCASA A True Z Fanatic Join Date: Nov 2009 Location: NC Posts: 1,152 Drives: 09 370z CY M6 Rep Power: 17	just got mine done last week no problems yet

02-17-2011, 12:05 PM	#68 (permalink)
alejo Base Member Join Date: May 2010 Location: Pensacola, FL Posts: 107 Drives: 10 T/S,NAV,MT, 08 R6 Rep Power: 14	I've had this problem for the past 4 weeks, this is such an inconvinience. I'm going back tomorrow to get my windows done again for the 3rd time... it keeps on pealing off. Can i just somehow unhook the window going up and down when i open my door and leave it like that for a week... will it hurt anything if i keep driving the car during this condition. dont want to break anything

03-07-2011, 12:52 AM	#72 (permalink)
MVPTonyD Base Member Join Date: Jan 2011 Location: Oklahoma Posts: 78 Drives: a scooter. Rep Power: 14	I thought this was only me! wow. i need to go get this check. __________________ Salute

03-07-2011, 03:33 AM	#73 (permalink)
omgZ Base Member Join Date: Sep 2010 Location: California Posts: 144 Drives: 10 370z 40th M6 Rep Power: 14	I have life time warranty on my tint, and the tint guy had to redo the driver side. I believe he said it is a common problem with the z because there is something inside of the door that wears on the corner of the tint (heat gun was used both times). The guy didn't have to remove the door panels. He only removed the inside weather strip(not sure what its called). Mine slowly began to peel after a couple of months, but i think he trimmed a bit more the second time so the tint wouldn't touch that area. I am not 100% sure if what he said was true lol, but it isn't peeling anymore. I hope this helps. Last edited by omgZ; 03-07-2011 at 03:40 AM.

03-09-2011, 07:44 PM	#74 (permalink)
Jme370 Base Member Join Date: Aug 2009 Location: Orlando, FL Posts: 81 Drives: 10 370z Roadster Rep Power: 15	FYI...the peeling issue can be avoided the first time you get your windows tinted. Below the weather strip on both doors, there is a little plastic piece in the front corner. The tint must be installed inside (underneath, depending on how you look at it) this plastic piece or else the tint will peel every time. If you pull back the weather stripping, you can see what I am talking about. __________________ 2010 370ZR Touring <PG/Blk 6 spd>Sport.Mats.Kicks. Sold.2009 370Z Touring<MB/Grey 6spd>Mats.Aero.Nav.

04-13-2011, 02:27 PM	#75 (permalink)
EazyD A True Z Fanatic Join Date: Nov 2009 Location: Massachusetts, USA Posts: 1,211 Drives: 2010 6MT Sport pkg. Rep Power: 25	Driver's side window was peeling. I just cut the loose part with a razor. So it's missing a triangle in the front corner, but nobody notices. It at least keeps it from getting worse and from having to re-tint (previous owner, some faraway shop did it) __________________ Pearl White 2010 370Z Sport, Stillen CBE, tint, K&N drop-in filters, GT-R start button, Kenwood DNX-6980 with backup cam, LED bulbs, Raceseng shift knob.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Window Tint	rudi	Australia/New Zealand	31	06-11-2018 06:05 PM
Window Issue. Anyone else?	In2Deep	Exterior & Interior	19	04-06-2018 11:53 AM
Clear Bra and 35% Window Tint on Platinum Graphite	VCuomo	Exterior & Interior	19	02-05-2011 03:51 PM
Window Tint Toronto, legal limit in Canada?	CAN-ZED	Exterior & Interior	3	09-29-2009 07:15 PM
Variable Window Tint \| Changes on the spot	nogoodname	Nissan 370Z General Discussions	33	09-15-2009 03:09 PM