Prototype Aftermarket Clutch Master Cylinder - INSTALLED!

Originally Posted by synolimit Is that hose clamp under a lot of pressure? If it is, always use fuel injection hose clamps. They are much better suited for high pressure,

		Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain
Prototype Aftermarket Clutch Master Cylinder - INSTALLED!

34Likes

LinkBack

Thread Tools

Display Modes

10-16-2013, 06:54 PM

#11 (permalink)

Rusty

Ronin Samurai - Assassin

Join Date: Dec 2011

Location: Fayettenam,Pennsyltucky

Age: 69

Posts: 35,494

Drives: 2011 Nismo GM 6M

Rep Power: 2684438

Quote:

Originally Posted by synolimit

Is that hose clamp under a lot of pressure? If it is, always use fuel injection hose clamps. They are much better suited for high pressure, holding firm, and they don't eat and dig into rubber hose when over tightened. They also provide 360 degrees of equal tightness where a worm clamp can see gaps around the screw area.

That clamp is on the hose going to the resevior. No pressure there.

Alstann and synolimit like this.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html

Bookmarks

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Possible solutions to aftermarket clutch master cylinder	Alstann	Engine & Drivetrain	32	03-26-2015 08:59 PM
Wilwood Heavy-Duty Clutch Master Cylinder	djrelic	Engine & Drivetrain	25	08-29-2014 07:59 AM
Replacing the clutch line and clutch master cylinder	djrelic	DIY Section (Do-It-Yourself)	1	05-12-2014 01:46 PM
cluth master cylinder out?!?!?!?!?!	lllll210lllll	Engine & Drivetrain	59	05-09-2014 01:39 PM
Clutch master cylinder went out again	Zenmaster	Engine & Drivetrain	4	03-26-2013 12:54 AM

All times are GMT -5. The time now is 02:59 AM.