z1 oil cooler installation w/ pics

Jordan12berg · 07-28-2018, 11:56 AM

Thanks for this DIY! Reading it and the instructions together before working on it helped a lot. Took me 2.5 hrs in no rush. 25 row you do need to take the bash bar off to drill the top bracket hole. It’s too much of an angle.

Tractionless · 08-08-2018, 01:06 PM

Now start covering rows if you're only street driven. I'm on a 25 row and run 18 in S. Florida I won't even see temps over 200*.

beauz · 08-18-2018, 09:55 PM

I routed mine up through the air intake port then along the front crash bar. As I have injen intakes the route shown doesn’t really work.

08-08-2018, 01:06 PM	#47 (permalink)
Tractionless A True Z Fanatic Join Date: Jan 2016 Location: Atlantic SE Posts: 1,237 Drives: '10 K23 ST 7AT Rep Power: 30525	Now start covering rows if you're only street driven. I'm on a 25 row and run 18 in S. Florida I won't even see temps over 200*. __________________ Toys Not Tots

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Oil Cooler (scratch built install, lottsa pics).....>.	Modshack	DIY Section (Do-It-Yourself)	307	08-09-2021 02:31 AM
DIY: Oil Cooler Installation on a Nismo (Damper Included!) - vipor	vipor	DIY Section (Do-It-Yourself)	100	05-31-2013 05:24 PM
iPad Installation [pics]	Rockstar	Audio & Video	52	10-07-2012 05:17 PM
Oil cooler installation	sminky63	Nissan 370Z General Discussions	24	11-23-2009 07:58 PM
Oil Cooler Installation DIY Request.	spearfish25	DIY Section (Do-It-Yourself)	3	05-16-2009 02:58 PM

07-28-2018, 11:56 AM	#46 (permalink)
Jordan12berg Base Member Join Date: Jul 2016 Location: Atlanta GA Posts: 70 Drives: 09 370z Red M6 Rep Power: 8	Thanks for this DIY! Reading it and the instructions together before working on it helped a lot. Took me 2.5 hrs in no rush. 25 row you do need to take the bash bar off to drill the top bracket hole. It’s too much of an angle.

08-18-2018, 09:55 PM	#48 (permalink)
beauz Base Member Join Date: Apr 2012 Location: australia Posts: 58 Drives: 09 370Z bs m6 Rep Power: 13	I routed mine up through the air intake port then along the front crash bar. As I have injen intakes the route shown doesn’t really work.