New clutch time

-ZS-Carpenter · 06-11-2019, 05:40 AM

Quote:

Originally Posted by madwi

JC's big azz broke 2 stools at my place. set a piece of mdf on the same trans jack and called it a rolling stool.

Lmao. It's double duty

Sent from my SM-G965U using Tapatalk

Spooler · 06-16-2019, 10:16 PM

Quote:

Originally Posted by madwi

JC's big azz broke 2 stools at my place. set a piece of mdf on the same trans jack and called it a rolling stool.

He is hefty at 6ft 6in. LMAO.

-ZS-Carpenter · 06-10-2019, 06:51 PM

So here is the final shopping list for those interested. I did forget 1 thing, a new shift knob. Thinking about starting a new thread next to the what oil should i use to figure that one out

Zspeed stage 3 super street clutch, Cmak, oem cmc, ect

rjm v3.3 pedal

Torque Solutions Trans Mount

Zspeed Short Throw Shifter

New bolts, Motul fluids all around, all the hot stuff is getting wrapped to keep the hot in and the cold stuff double wrapped to keep the hot out.

fingers crossed in 3 weeks I'm looking to plan a break in road trip

-ZS-Carpenter · 06-11-2019, 04:56 AM

Joe don't mess around with the shipping. Should have everything on Wednesday.

Sent from my SM-G965U using Tapatalk

madwi · 06-11-2019, 05:05 AM

Quote:

Originally Posted by -ZS-Carpenter

Joe don't mess around with the shipping. Should have everything on Wednesday.

Sent from my SM-G965U using Tapatalk

Usually 1 day shipping for me from Zspeed.

Cant argue with that.

-ZS-Carpenter · 06-15-2019, 09:24 AM

Time to get busy

-ZS-Carpenter · 06-16-2019, 10:38 AM

Trans is back home. cmak is done. All down hill from here.

Extra heat wrap on all the lines too, used dei cool tube. Really easy to work with, seems like it will help a bit

-ZS-Carpenter · 06-16-2019, 07:37 PM

"Last couple parts honey, I swear this is the last i need to finish up."

VQ Vortex shift knob

got the gaskets on the way too. Should be it, I'm totally not over budget because I quit counting

BettyZ · 06-16-2019, 08:46 PM

Quote:

Originally Posted by -ZS-Carpenter

"Last couple parts honey, I swear this is the last i need to finish up."

VQ Vortex shift knob

got the gaskets on the way too. Should be it, I'm totally not over budget because I quit counting

I had a question ab the height and radius of that knob but **** it i'm buying it.

-ZS-Carpenter · 06-19-2019, 02:56 PM

http://http://www.the370z.com/member...uttoned-up.jpg

Exhaust gasket came in today. That is 100% of everything underneath except bleeding the clutch. Going to get it back on the ground and prep for the pedal/cmc swap this weekend

-ZS-Carpenter · 06-22-2019, 08:18 PM

Got the pedal and cmc pulled. Will pick up on the install in the AM.

06-10-2019, 06:51 PM	#3 (permalink)
-ZS-Carpenter A True Z Fanatic Join Date: Sep 2016 Location: Illinois Posts: 2,410 Drives: 13 370z 6MT Rep Power: 2684368	So here is the final shopping list for those interested. I did forget 1 thing, a new shift knob. Thinking about starting a new thread next to the what oil should i use to figure that one out Zspeed stage 3 super street clutch, Cmak, oem cmc, ect rjm v3.3 pedal Torque Solutions Trans Mount Zspeed Short Throw Shifter New bolts, Motul fluids all around, all the hot stuff is getting wrapped to keep the hot in and the cold stuff double wrapped to keep the hot out. fingers crossed in 3 weeks I'm looking to plan a break in road trip JARblue, jchammond and BettyZ like this.

06-11-2019, 04:56 AM	#4 (permalink)
-ZS-Carpenter A True Z Fanatic Join Date: Sep 2016 Location: Illinois Posts: 2,410 Drives: 13 370z 6MT Rep Power: 2684368	Joe don't mess around with the shipping. Should have everything on Wednesday. Sent from my SM-G965U using Tapatalk madwi and BettyZ like this.

06-15-2019, 09:24 AM	#6 (permalink)
-ZS-Carpenter A True Z Fanatic Join Date: Sep 2016 Location: Illinois Posts: 2,410 Drives: 13 370z 6MT Rep Power: 2684368	Time to get busy Joe@ZSpeed, Rusty, Jayhovah and 2 others like this.

06-16-2019, 10:38 AM	#7 (permalink)
-ZS-Carpenter A True Z Fanatic Join Date: Sep 2016 Location: Illinois Posts: 2,410 Drives: 13 370z 6MT Rep Power: 2684368	Trans is back home. cmak is done. All down hill from here. Extra heat wrap on all the lines too, used dei cool tube. Really easy to work with, seems like it will help a bit JARblue, Joe@ZSpeed, Rusty and 2 others like this.

06-16-2019, 07:37 PM	#8 (permalink)
-ZS-Carpenter A True Z Fanatic Join Date: Sep 2016 Location: Illinois Posts: 2,410 Drives: 13 370z 6MT Rep Power: 2684368	"Last couple parts honey, I swear this is the last i need to finish up." VQ Vortex shift knob got the gaskets on the way too. Should be it, I'm totally not over budget because I quit counting Spooler, old guy and BettyZ like this.

06-19-2019, 02:56 PM	#10 (permalink)
-ZS-Carpenter A True Z Fanatic Join Date: Sep 2016 Location: Illinois Posts: 2,410 Drives: 13 370z 6MT Rep Power: 2684368	http://http://www.the370z.com/member...uttoned-up.jpg Exhaust gasket came in today. That is 100% of everything underneath except bleeding the clutch. Going to get it back on the ground and prep for the pedal/cmc swap this weekend Rusty, jchammond, old guy and 1 others like this.

06-22-2019, 08:18 PM	#11 (permalink)
-ZS-Carpenter A True Z Fanatic Join Date: Sep 2016 Location: Illinois Posts: 2,410 Drives: 13 370z 6MT Rep Power: 2684368	Got the pedal and cmc pulled. Will pick up on the install in the AM. Rusty, jchammond and BettyZ like this.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Clutch replacement time	-ZS-Carpenter	Drivetrain/Engine	3	05-20-2019 01:21 PM
GT//Monsters Clutch Kits Flywheel Shop - Clutch Master \|\| Competition Clutch \|\| SPEC	gtmonsters	Drivetrain/Engine	189	10-30-2015 11:41 PM
Clutch failed for the 4th time	Glambutang	Engine & Drivetrain	19	02-22-2014 03:21 AM
Time to Replace the clutch?	kevin.z	Engine & Drivetrain	24	04-18-2010 05:36 PM
Does anyone's transmission clunk from time to time when pushing the clutch in??	chitown1863	Engine & Drivetrain	21	04-13-2010 08:22 AM