GT-R turbos on the VQ37

husam2012 · 05-16-2018, 10:20 PM

Quote:

Originally Posted by rovert

Not sure exactly how you filled it, but, if you filled it without having the bleed valves open you may have already introduced an air lock into the system.
I dont think its possible to bleed it properly after the fact
I would drain & refill.

Sorry forgot to reply to this message. I believe I did bleed it properly using a tall funnel and squeezing the radiator hoses to get all the bubbles out. So far it's been amazing and both oil and coolant temps never go higher than they were NA (even though I have no oil cooler)

Also for anybody that has a similar issue with the fans, keep in mind that they don't turn on full power until 100C!

Sent from my iPhone using Tapatalk

Jayhovah · 05-17-2018, 08:43 AM

long time comin! Hope to see you putting more of these GTR370Z's on the road!

husam2012 · 05-18-2018, 10:32 PM

Here's a short video for you guys!

Hoping to go on the dyno tomorrow to finally see the results.

husam2012 · 06-08-2018, 10:08 PM

Forgot to update this after the dyno but it was my first time tuning my own car and here's the results!

Tuned on Ecutek at wastegate pressure (7.5~psi near redline)

This is also before I learned how to properly tune the timing tables so it was just on around 13-14 degrees of timing near redline. I'm currently running 18 degrees on the street.
I'm going back to the dyno next week to retune it with my boost controller. I'm hoping to hit 620~ whp or around there.

husam2012 · 07-01-2018, 10:53 PM

So I've reached the end of the tunnel. While it's satisfying to finish it the way I wanted it in the beginning, I'm still a student and having a 650~ WHP Z isn't the best financial decision.

I will be parting out my car this upcoming winter, and will be offering a decent deal on installation and tuning for anyone in the Michigan/Ohio area. I might also entertain trades for a 6MT G37 or a Q50/Q60 if you guys know anyone.

Here's a couple recent videos

unijabnx · 07-03-2018, 08:11 PM

I thought you were going to make adapter kits to sell ?

husam2012 · 07-03-2018, 08:32 PM

Quote:

Originally Posted by unijabnx

I thought you were going to make adapter kits to sell ?

I am! Sold 6 so far and trying to make it even easier by including inlets and downpipes

Sent from my iPhone using Tapatalk

husam2012 · 08-28-2018, 03:20 PM

My car is currently for sale and back to NA (test pipes and E85) making 330 whp (it's actually pretty fun still!) If you guys know anybody looking for a very clean stock '12 370Z with a newer motor (only 19k miles) please let me know.

Fortunately, I was able to score a pretty good deal on a nice daily and still stay in the VQ family. I might be able to do this again in the foreseeable future

I got a red G37 coupe 6MT for $3600 !!!

I'm thankful to this forum and everyone who has helped me. Owning this car has been a great learning experience and I hope everyone enjoyed this journey as much as I did.

If you guys ever have any questions about this kit, please feel free to contact me.

Jayhovah · 08-29-2018, 10:49 AM

Sad to see you leaving Z ownership, hope you will stuck around you have contributed a ton around here!

sirnixalot · 08-29-2018, 12:43 PM

I should have everything I need on island next month. Looking to park the car in a friends garage to start the install in november.

BIG thanks to Husam for pioneering this kit and sharing details along the way.

husam2012 · 08-30-2018, 02:02 PM

Thanks everyone for the kind words! I hope to buy a Z again in a couple years and push the limits on these turbos once again. I currently have a spare engine laying around that I might build over the next coupe years

@sirnixalot; I hope I can see your car once it's done, it is going to be a blast I'm sure!

husam2012 · 01-15-2019, 12:22 AM

Update to everyone that might be considered this!
My friend in Adel in California was able to achieve this on his stock block and stock trans (auto) g37

phunk · 01-15-2019, 01:44 AM

Very nice. You’ve done a great service to the community by paving this path for anyone that wishes to go down it.

husam2012 · 01-22-2019, 02:55 PM

Quote:

Originally Posted by phunk

Very nice. You’ve done a great service to the community by paving this path for anyone that wishes to go down it.

Thank you Charles, you have done an even greater service to this community with your fuel systems and your dedication to this platform! Really love those motor mounts

I'm trying to buy a cheap Q50 3.7 AWD so I can make what Nissan/Infiniti failed to do, I'll update you guys as soon as I'm done.

husam2012 · 04-14-2019, 11:20 PM

Update for all my friends on the forum! I bought another Z, this time in a color that I like a little bit more. '14 Nismo with 29k miles!

Already have everything ready for it except for the S1SE from Phunk, and some ID1300s

05-18-2018, 10:32 PM	#528 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 552 Drives: 370Z Nismo Rep Power: 9470	Here's a short video for you guys! Hoping to go on the dyno tomorrow to finally see the results. 2sl0w, Smashley, kpic and 4 others like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

06-08-2018, 10:08 PM	#529 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 552 Drives: 370Z Nismo Rep Power: 9470	Forgot to update this after the dyno but it was my first time tuning my own car and here's the results! Tuned on Ecutek at wastegate pressure (7.5~psi near redline) This is also before I learned how to properly tune the timing tables so it was just on around 13-14 degrees of timing near redline. I'm currently running 18 degrees on the street. I'm going back to the dyno next week to retune it with my boost controller. I'm hoping to hit 620~ whp or around there. scratchdvinyl, Smashley, rovert and 4 others like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

07-01-2018, 10:53 PM	#530 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 552 Drives: 370Z Nismo Rep Power: 9470	So I've reached the end of the tunnel. While it's satisfying to finish it the way I wanted it in the beginning, I'm still a student and having a 650~ WHP Z isn't the best financial decision. I will be parting out my car this upcoming winter, and will be offering a decent deal on installation and tuning for anyone in the Michigan/Ohio area. I might also entertain trades for a 6MT G37 or a Q50/Q60 if you guys know anyone. Here's a couple recent videos 2011 Nismo#91, natedog37 and YzGyz like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

07-03-2018, 08:11 PM	#531 (permalink)
unijabnx Base Member Join Date: Jul 2016 Location: NC Posts: 50 Drives: 2016 Sport Rep Power: 9	I thought you were going to make adapter kits to sell ? husam2012 likes this.

08-28-2018, 03:20 PM	#533 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 552 Drives: 370Z Nismo Rep Power: 9470	My car is currently for sale and back to NA (test pipes and E85) making 330 whp (it's actually pretty fun still!) If you guys know anybody looking for a very clean stock '12 370Z with a newer motor (only 19k miles) please let me know. Fortunately, I was able to score a pretty good deal on a nice daily and still stay in the VQ family. I might be able to do this again in the foreseeable future I got a red G37 coupe 6MT for $3600 !!! I'm thankful to this forum and everyone who has helped me. Owning this car has been a great learning experience and I hope everyone enjoyed this journey as much as I did. If you guys ever have any questions about this kit, please feel free to contact me. Hotrodz, Jayhovah, wideglideleon and 2 others like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

08-29-2018, 12:43 PM	#535 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57455	I should have everything I need on island next month. Looking to park the car in a friends garage to start the install in november. BIG thanks to Husam for pioneering this kit and sharing details along the way. ZontheRocks likes this. __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

08-30-2018, 02:02 PM	#536 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 552 Drives: 370Z Nismo Rep Power: 9470	Thanks everyone for the kind words! I hope to buy a Z again in a couple years and push the limits on these turbos once again. I currently have a spare engine laying around that I might build over the next coupe years @sirnixalot; I hope I can see your car once it's done, it is going to be a blast I'm sure! Z Runner likes this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

01-15-2019, 12:22 AM	#537 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 552 Drives: 370Z Nismo Rep Power: 9470	Update to everyone that might be considered this! My friend in Adel in California was able to achieve this on his stock block and stock trans (auto) g37 Rusty, Hotrodz, Jayhovah and 4 others like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

01-15-2019, 01:44 AM	#538 (permalink)
phunk A True Z Fanatic Join Date: Mar 2009 Location: Chicago Posts: 3,669 Drives: 370 Rep Power: 974724	Very nice. You’ve done a great service to the community by paving this path for anyone that wishes to go down it. Rusty, Hotrodz, Kojack and 8 others like this. __________________ Charles @ CJ Motorsports : Website \| Facebook \| Instagram \| YouTube Home of the 9 second, stock longblock, stock drivetrain 6MT 370z. 9.91 @ 142mph

04-14-2019, 11:20 PM	#540 (permalink)
husam2012 Track Member Join Date: Mar 2015 Location: Michigan Posts: 552 Drives: 370Z Nismo Rep Power: 9470	Update for all my friends on the forum! I bought another Z, this time in a color that I like a little bit more. '14 Nismo with 29k miles! Already have everything ready for it except for the S1SE from Phunk, and some ID1300s phunk, KaienZ34, scratchdvinyl and 7 others like this. __________________ Creator of the GTR TT Conversion Kit, NA Record Holder (401WHP) Ecutek Master Tuner (VQ37, VR30, VR38, B58, S55, S58) BTWTuning

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Turbos	NIZZING	Parts for sale (Private Classifieds)	1	10-16-2016 09:03 PM
[FOR SALE] Turbos	NIZZING	Parts for sale (Private Classifieds)	0	08-11-2015 03:30 PM
[FOR SALE] Someone please buy my turbos!	NIZZING	Parts for sale (Private Classifieds)	3	11-12-2014 08:47 PM
EFR Turbos	frydrce	Forced Induction	34	08-30-2012 09:43 AM
somebody who knows a lot about turbos please help	kevin1985912	Forced Induction	15	10-05-2010 11:00 AM