Jim Wolf Cam testing for the VQ37VHR -- Results inside!

Hotrodz · 02-07-2019, 11:39 AM

Quote:

Originally Posted by Elmo370z

You better ready to drop some coin you want to attain those power levels. That’s a 40-50k build and I felt like all aspect still were not covered to support that power.

Maybe not that much but from scratch no less than 35k. Regardless get to drop some serious coin!

Sent from my SM-G965U using Tapatalk

Elmo370z · 02-08-2019, 12:21 PM

Quote:

Originally Posted by Hotrodz

Maybe not that much but from scratch no less than 35k. Regardless get to drop some serious coin!

Sent from my SM-G965U using Tapatalk

If I’m going that high in power I’m doing a billet crank.That FI kit isn’t cheap. That’s almost 20k right there, plus built motor to support all that is at least 10k. Plus everything thing else is at least another 10k.

Hotrodz · 02-08-2019, 01:31 PM

Quote:

Originally Posted by Elmo370z

If I’m going that high in power I’m doing a billet crank.That FI kit isn’t cheap. That’s almost 20k right there, plus built motor to support all that is at least 10k. Plus everything thing else is at least another 10k.

LOL, you can easily spend 40k but remember not everything that glitters is not gold. I have gone back and forth on what is needed versus wants. If you want to rev in the 8k range a billet crank would be optional. That crank is 3k and a 6 month wait. More than likely something else is going fail before the crank. Let's face it when you jump to doing a high performance build all bets are off as a $15 part can cause and often does cause catastrophic failure. So with kiss and a prayer we venture were few dare.

Sent from my SM-G965U using Tapatalk

Rusty · 02-08-2019, 02:09 PM

It doesn't have to be a $15.00 part. I've seen a #6 screw take a motor out.

Hotrodz · 02-08-2019, 02:19 PM

Quote:

Originally Posted by Rusty

It doesn't have to be a $15.00 part. I've seen a #6 screw take a motor out.

Case in point, we lost a space shuttle to a $2.50 O ring!

Sent from my SM-G965U using Tapatalk

Rusty · 02-08-2019, 04:02 PM

Quote:

Originally Posted by Hotrodz

Case in point, we lost a space shuttle to a $2.50 O ring!

Sent from my SM-G965U using Tapatalk

Gov't o-ring? Better add some zero's behind your numbers.

Spooler · 02-11-2019, 11:10 AM

Quote:

Originally Posted by Hotrodz

Maybe not that much but from scratch no less than 35k. Regardless get to drop some serious coin!

Sent from my SM-G965U using Tapatalk

Elmo is right... LOL Ask me how I know.

02-08-2019, 02:09 PM	#4 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,398 Drives: 2011 Nismo GM 6M Rep Power: 2684438	It doesn't have to be a $15.00 part. I've seen a #6 screw take a motor out. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM Denso VQ37VHR Fuel injector Flow Test results	MILENKOGT	Engine & Drivetrain	13	08-30-2015 04:52 PM
GTM Stage 2 Supercharger Preliminary Testing Results	SAM@GTM	Forced Induction	576	01-15-2014 09:40 PM
Uprev Tuned at Z1, results inside :)	'10Anamoly	Tuning	12	01-01-2012 12:32 PM
1/4 mile results inside	ZforMe	Track / Autocross / Drifting / Dragstrip	32	04-24-2009 07:27 AM
Knock on the VQ37VHR - gear heads step inside	BerkTech	Intake/Exhaust	39	04-13-2009 10:37 AM