Jim Wolf Cam testing for the VQ37VHR -- Results inside!

Elmo370z · 02-19-2019, 09:49 PM

Quote:

Originally Posted by chuckie311

Just throwing this out there.. anyone think 3 inch intakes would be better for more power than stillen Gen 3 once the cam in is..since i have ported 63mm throttle bodies ported Upper and Lower Manifold as well

chuckie311 · 02-19-2019, 10:43 PM

Quote:

Originally Posted by SS_Firehawk

You'd be lucky to see a difference of more than 1-2hp, if anything at all.

Just a thought willing to try different parts to see If they make more power

chuckie311 · 02-21-2019, 02:08 PM

Quote:

Originally Posted by Elmo370z

5 -10 WHP over stillen Gen 3

but let me know when you Dyno test parts..

Whjaxn17 · 02-22-2019, 09:22 AM

Z1 did some testing the weekend before I picked my car up from having the cams installed and they dyno tested the Stillen G3, Z1, and the Admin intake on the same car the same day. The results are as follows:

Stillen 323.75 WHP 265.24 TQ
Z1 323.23 WHP 266.37 TQ
Admin 322.46 WHP 265.34 TQ

I don't know what other mods are on the car, but they swapped intakes, dyno pull, swapped, another pull...you get the idea. I do know this car wasn't cammed, though.

I'd be interested to see a cammed car w/ 3" vs a cammed car w/ 2.5" like Z1. Also, just to play the devil's advocate and

, SOHO has a 2.75" intake in the works.

Rusty · 02-22-2019, 02:54 PM

Quote:

Originally Posted by Whjaxn17

Z1 did some testing the weekend before I picked my car up from having the cams installed and they dyno tested the Stillen G3, Z1, and the Admin intake on the same car the same day. The results are as follows:

Stillen 323.75 WHP 265.24 TQ
Z1 323.23 WHP 266.37 TQ
Admin 322.46 WHP 265.34 TQ

I don't know what other mods are on the car, but they swapped intakes, dyno pull, swapped, another pull...you get the idea. I do know this car wasn't cammed, though.

I'd be interested to see a cammed car w/ 3" vs a cammed car w/ 2.5" like Z1. Also, just to play the devil's advocate and

, SOHO has a 2.75" intake in the works.

No difference. Really have to nit pick it and split hairs. Wonder if they did a tune for each intake?

zer099 · 02-22-2019, 03:13 PM

When going from 2.5" to 3" you might need to rescale the MAFs to get the (if any) benefits from a larger intake. I know when I went from takeda to AAM I had to get a tune as the car did not like the 2.75" without something being tweaked.

Which brings me to bring up: AAM has had their 2.75" intake around for a couple years now.

chuckie311 · 02-22-2019, 03:42 PM

I would be willing to test 3 inch intakes when I get my cam installed to see if they make more power over Stillen...
Still on the fence about dropping 640 just to test them out.. if I could get a deal or borrow some I’m all for it..

Hotrodz · 02-22-2019, 04:16 PM

You are not going to see any difference in a meaningful way with 3" exhaust unless you are boosted. It is the law diminishing returns when it come to exhaust mods NA!

Rusty · 02-22-2019, 07:44 PM

Quote:

Originally Posted by Hotrodz

You are not going to see any difference in a meaningful way with 3" exhaust unless you are boosted. It is the law diminishing returns when it come to exhaust mods NA!

It's 3" intakes Bobby.

Hotrodz · 02-25-2019, 10:30 AM

Quote:

Originally Posted by Rusty

It's 3" intakes Bobby.

Oh okay...same thing applies lol!

Sent from my SM-G965U using Tapatalk

Whjaxn17 · 02-25-2019, 11:48 AM

Other than 1Slow370's car, the other 2 cars that are close to me are running 3" intakes, 1 Admin, 1 RZG. 1 actually beat me @ 382whp/305wtq. There's been some suspicion/disbelief floating around about that, but I saw a lot of the same when I broke the record, so it's just part of it. Ray(don't know last name) tuned the car in house @ RZG. 2014 Q60.

Elmo370z · 02-25-2019, 01:33 PM

Quote:

Originally Posted by Whjaxn17

Other than 1Slow370's car, the other 2 cars that are close to me are running 3" intakes, 1 Admin, 1 RZG. 1 actually beat me @ 382whp/305wtq. There's been some suspicion/disbelief floating around about that, but I saw a lot of the same when I broke the record, so it's just part of it. Ray(don't know last name) tuned the car in house @ RZG. 2014 Q60.

You running oem headers

Elmo370z · 02-25-2019, 01:37 PM

Quote:

Originally Posted by Whjaxn17

Other than 1Slow370's car, the other 2 cars that are close to me are running 3" intakes, 1 Admin, 1 RZG. 1 actually beat me @ 382whp/305wtq. There's been some suspicion/disbelief floating around about that, but I saw a lot of the same when I broke the record, so it's just part of it. Ray(don't know last name) tuned the car in house @ RZG. 2014 Q60.

Car here in Florida that made 360 with ppe’s, cbe, intake, and a hr upper on race gas. Tested on two different dyno’s. So let the haters hate, keep doing you.

Whjaxn17 · 02-25-2019, 02:20 PM

Quote:

Originally Posted by Elmo370z

You running oem headers

Z1 headers w/ ART pipes

Quote:

Originally Posted by Elmo370z

Car here in Florida that made 360 with ppe’s, cbe, intake, and a hr upper on race gas. Tested on two different dyno’s. So let the haters hate, keep doing you.

Haven't seen that 1. 1 in Cali that made 259/296(Admin intakes and remote tune), the RZG car at 382/305(he told me a week or so ago that he had actually been on another dyno since and did 381 on it), and then mine at 377/299.

Elmo370z · 02-25-2019, 02:26 PM

Quote:

Originally Posted by Whjaxn17

Z1 headers w/ ART pipes

Haven't seen that 1. 1 in Cali that made 259/296(Admin intakes and remote tune), the RZG car at 382/305(he told me a week or so ago that he had actually been on another dyno since and did 381 on it), and then mine at 377/299.

Sweet. You have a Q50?

02-22-2019, 09:22 AM	#484 (permalink)
Whjaxn17 Enthusiast Member Join Date: Sep 2015 Location: Alabama Age: 29 Posts: 420 Drives: 17 370Z 6MT Rep Power: 3364	Z1 did some testing the weekend before I picked my car up from having the cams installed and they dyno tested the Stillen G3, Z1, and the Admin intake on the same car the same day. The results are as follows: Stillen 323.75 WHP 265.24 TQ Z1 323.23 WHP 266.37 TQ Admin 322.46 WHP 265.34 TQ I don't know what other mods are on the car, but they swapped intakes, dyno pull, swapped, another pull...you get the idea. I do know this car wasn't cammed, though. I'd be interested to see a cammed car w/ 3" vs a cammed car w/ 2.5" like Z1. Also, just to play the devil's advocate and , SOHO has a 2.75" intake in the works. __________________ 377whp/299wtq NA 704whp/519wtq, SOHO stage 2.5 IG: pearlywhite.z

02-22-2019, 03:13 PM	#486 (permalink)
zer099 Base Member Join Date: Oct 2015 Location: Dawsonville, GA Posts: 88 Drives: '98 200sx; '09 G37x Rep Power: 9	When going from 2.5" to 3" you might need to rescale the MAFs to get the (if any) benefits from a larger intake. I know when I went from takeda to AAM I had to get a tune as the car did not like the 2.75" without something being tweaked. Which brings me to bring up: AAM has had their 2.75" intake around for a couple years now. __________________ 2009 G37X \| 326 AWHP \| 264 AWTQ

02-22-2019, 03:42 PM	#487 (permalink)
chuckie311 Enthusiast Member Join Date: Jul 2012 Location: las vegas Posts: 313 Drives: Q50/G37 Rep Power: 12	I would be willing to test 3 inch intakes when I get my cam installed to see if they make more power over Stillen... Still on the fence about dropping 640 just to test them out.. if I could get a deal or borrow some I’m all for it.. __________________ Tuned by (Seb@Specialty-Z) 2011 G37 Cam'd FBO 347whp 280wtq Corn Fed 4.08 Gears

02-22-2019, 04:16 PM	#488 (permalink)
Hotrodz Premium Member Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684384	You are not going to see any difference in a meaningful way with 3" exhaust unless you are boosted. It is the law diminishing returns when it come to exhaust mods NA! abm89 likes this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

02-25-2019, 11:48 AM	#491 (permalink)
Whjaxn17 Enthusiast Member Join Date: Sep 2015 Location: Alabama Age: 29 Posts: 420 Drives: 17 370Z 6MT Rep Power: 3364	Other than 1Slow370's car, the other 2 cars that are close to me are running 3" intakes, 1 Admin, 1 RZG. 1 actually beat me @ 382whp/305wtq. There's been some suspicion/disbelief floating around about that, but I saw a lot of the same when I broke the record, so it's just part of it. Ray(don't know last name) tuned the car in house @ RZG. 2014 Q60. Elmo370z likes this. __________________ 377whp/299wtq NA 704whp/519wtq, SOHO stage 2.5 IG: pearlywhite.z Last edited by Whjaxn17; 02-25-2019 at 11:50 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
OEM Denso VQ37VHR Fuel injector Flow Test results	MILENKOGT	Engine & Drivetrain	13	08-30-2015 04:52 PM
GTM Stage 2 Supercharger Preliminary Testing Results	SAM@GTM	Forced Induction	576	01-15-2014 09:40 PM
Uprev Tuned at Z1, results inside :)	'10Anamoly	Tuning	12	01-01-2012 12:32 PM
1/4 mile results inside	ZforMe	Track / Autocross / Drifting / Dragstrip	32	04-24-2009 07:27 AM
Knock on the VQ37VHR - gear heads step inside	BerkTech	Intake/Exhaust	39	04-13-2009 10:37 AM