EBC Brake Pad Bedding procedures?

Rangerz

[\QUOTE]



Oh, ideally, dont drive too fast after you perform the bed in process to allow your pads and rotors to cool slowly and as stated in other posts don't come to a stop for any length of time, if you have to, release the brakes and roll back and forth.[/QUOTE]

This brings up another question. If you have break cooling ducts would it be wise to block those off during the bedding procedure? Or just do a few more runs I guess.

Good info guys

__________________
Stillen Gen III/ NST/ Fast Intentions Non-Res HFC & 12" Resonated CF TDX/ Setreb series 9 OC/ SPL upper control arms/ Whiteline front & rear swaybars/ Uprev tuned by Seb@specialtyZ/ 319HP 262TQ/ Z1 PS Cooler/ Z1 SS Premium break lines/ CJM Road Race pump/Carbotech F:XP10 R:XP8 Nismo OC DIY