Nissan 370Z Forum  

First Problem With my 370Z

Originally Posted by Fountainhead I'm kind of on the fence about warp, I just know that in the old days, when all the auto parts houses would turn the rotor,

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Brakes & Suspension


Like Tree30Likes

 
 
LinkBack Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 04-05-2013, 09:28 AM   #10 (permalink)
A True Z Fanatic
 
Sh0velMan's Avatar
 
Join Date: Jan 2012
Location: Dallas/Ft.Worth
Posts: 3,349
Drives: Noisily.
Rep Power: 22
Sh0velMan has a brilliant futureSh0velMan has a brilliant futureSh0velMan has a brilliant futureSh0velMan has a brilliant futureSh0velMan has a brilliant futureSh0velMan has a brilliant futureSh0velMan has a brilliant futureSh0velMan has a brilliant futureSh0velMan has a brilliant futureSh0velMan has a brilliant futureSh0velMan has a brilliant future
Default

Quote:
Originally Posted by Fountainhead View Post
I'm kind of on the fence about warp, I just know that in the old days, when all the auto parts houses would turn the rotor, when we clamped the rotor to the lathe and just rotated the rotor against the lathe bit there would indeed be an uneven surface. Thinking back none of us questioned the "trueness" of the lathe, the trueness of the rotor mounting face, we just turned the rotor until the high spots were gone and put it back on the car and the problem was solved. Usually we saw rotors that were ran several years on the metal face of the worn out pad by drivers that had no idea what the noise was but they KNEW it would cost them money so they just kept on going, haha.

The pulsation and loss of braking power is definitely caused by high spots on the friction surface, but that's not necessarily caused by warpage.

You would have to measure both sides of the rotor's change in position relative to the mounting hub in real time. If one side sticks out 2mm and the other is recessed 2mm at the same spot, then chances are the rotor is warped. If both sides stick out, or only one side sticks out, chances are it's cementite formation causing the hardness of the rotor material to increase so that it wears at a different rate than the surrounding metal. This causes the condition to gradually worsen over a period of time, making it "sneak up" on the driver in most cases.

Truly warped rotors are usually obvious almost immediately and don't "sneak up" on the driver. One minute they're fine, the next minute there's a pronounced pulsation in the pedal.
__________________
Buy My Car! | Build Thread
Sh0velMan is offline   Reply With Quote
 

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
SC 370z problem geohartanto Forced Induction 14 12-05-2011 12:03 AM
Another problem with my 370Z plumber78 Engine & Drivetrain 10 06-24-2011 06:30 AM
I think i found a problem with my 370Z... Juruki Nissan 370Z General Discussions 43 07-19-2010 10:19 AM
370Z Not Cranking Problem Master_Ly Nissan 370Z General Discussions 38 05-06-2010 09:50 PM
New Roadster, Spoiler problem, dealer problem Hello Nissan 370Z General Discussions 26 01-11-2010 05:22 PM


All times are GMT -5. The time now is 10:14 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2