Nissan 370Z Forum  

Brake Rotors - Which ones are track-worthy

Lot's of useful info on this thread, but it feels like some of the info isn't 100% accurate. It's a bit hard to believe drilled rotors are as bad as

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Brakes & Suspension


Like Tree2Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 09-24-2012, 11:12 AM   #31 (permalink)
A True Z Fanatic
 
Cmike2780's Avatar
 
Join Date: Jun 2010
Location: Long Island
Posts: 5,059
Drives: slowwww
Rep Power: 28
Cmike2780 has a reputation beyond reputeCmike2780 has a reputation beyond reputeCmike2780 has a reputation beyond reputeCmike2780 has a reputation beyond reputeCmike2780 has a reputation beyond reputeCmike2780 has a reputation beyond reputeCmike2780 has a reputation beyond reputeCmike2780 has a reputation beyond reputeCmike2780 has a reputation beyond reputeCmike2780 has a reputation beyond reputeCmike2780 has a reputation beyond repute
Default

Lot's of useful info on this thread, but it feels like some of the info isn't 100% accurate. It's a bit hard to believe drilled rotors are as bad as some people make them out to be considering it's still widely used in a lot of high end sports cars. I've seen drilled rotors crack, but I've also seen solid rotors crack. I think it really has a lot do with the manufacturer, conditions and usage. For track worthyness, it really depends on how much track use you're actually doing. What's best for the track isn't necessary the best for the street. For a lot of people, 2 piece rotors are overkill. They look awesome and drool worthy, but kind of pointless 95% of the time for a multi purpose car. A dedicated track car is a different story.
__________________
[09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R]

Cmike2780 is offline   Reply With Quote
Old 09-24-2012, 11:36 AM   #32 (permalink)
A True Z Fanatic
 
ChrisSlicks's Avatar
 
Join Date: Mar 2009
Location: North East
Posts: 6,203
Drives: 09 370Z Sport M6
Rep Power: 653
ChrisSlicks has a reputation beyond reputeChrisSlicks has a reputation beyond reputeChrisSlicks has a reputation beyond reputeChrisSlicks has a reputation beyond reputeChrisSlicks has a reputation beyond reputeChrisSlicks has a reputation beyond reputeChrisSlicks has a reputation beyond reputeChrisSlicks has a reputation beyond reputeChrisSlicks has a reputation beyond reputeChrisSlicks has a reputation beyond reputeChrisSlicks has a reputation beyond repute
Default

Quote:
Originally Posted by Cmike2780 View Post
Lot's of useful info on this thread, but it feels like some of the info isn't 100% accurate. It's a bit hard to believe drilled rotors are as bad as some people make them out to be considering it's still widely used in a lot of high end sports cars. I've seen drilled rotors crack, but I've also seen solid rotors crack. I think it really has a lot do with the manufacturer, conditions and usage. For track worthyness, it really depends on how much track use you're actually doing. What's best for the track isn't necessary the best for the street. For a lot of people, 2 piece rotors are overkill. They look awesome and drool worthy, but kind of pointless 95% of the time for a multi purpose car. A dedicated track car is a different story.
Almost all rotors crack at some point under heavy heat fatigue conditions. A full weight track Z generates a massive amount of heat in the front brakes and you would need lots of airflow (at least two 3" ducts) to keep them at an ideal temperature. The issue with drilled rotors is that they tend to crack sooner than a solid rotor would at the same conditions, and the small cracks that start off in the solid rotors play connect-the-dots on the drilled ones. The OEM drilled rotors on the Z06 are a perfect example of this. If you can keep the temps low enough then drilled rotors would be just fine, it's the thermal expansion and cooling that is the problem.

I also agree that 2-piece rotors are overkill on a multi-purpose car, cost savings are a myth, and full floating systems are noisy and problematic for the street. You can tell if a car is show or track by looking at the calipers, if the paint is bright and clean then it is show, if the paint is discolored and weird, then it is track ... except for Mike's because he powdercoats them after each event
__________________
Hotchkis ARB | Stillen CAI | Art Pipes | Berk CBE | Stillen AP Racing Brakes | AE Performance Oil Cooler | BC Racing ER Coilovers | Doran Control Arms
ChrisSlicks is offline   Reply With Quote
Old 09-24-2012, 04:34 PM   #33 (permalink)
Base Member
 
Race_Tech's Avatar
 
Join Date: Sep 2012
Location: Tampa
Posts: 58
Drives: S4 Race Car, IS350
Rep Power: 12
Race_Tech is on a distinguished road
Default

Would you guys be interested in a two-piece option from AP Racing like this.

takjak2 likes this.
Race_Tech is offline   Reply With Quote
Old 09-25-2012, 03:31 AM   #34 (permalink)
Ronin Samurai - Assassin
 
Rusty's Avatar
 
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 34,813
Drives: 2011 Nismo GM 6M
Rep Power: 2684436
Rusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond reputeRusty has a reputation beyond repute
Talking

Quote:
Originally Posted by Race_Tech View Post
Would you guys be interested in a two-piece option from AP Racing like this.

__________________

浪人 - 殺し屋
"The Difficult Anytime, The Impossible By Appointment Only"
http://www.the370z.com/members-370z-...o-journal.html
Rusty is offline   Reply With Quote
Old 09-25-2012, 12:08 PM   #35 (permalink)
A True Z Fanatic
 
takjak2's Avatar
 
Join Date: Feb 2011
Location: Sterling, VA
Posts: 1,922
Drives: Legit Racecar 370Z
Rep Power: 142
takjak2 has a reputation beyond reputetakjak2 has a reputation beyond reputetakjak2 has a reputation beyond reputetakjak2 has a reputation beyond reputetakjak2 has a reputation beyond reputetakjak2 has a reputation beyond reputetakjak2 has a reputation beyond reputetakjak2 has a reputation beyond reputetakjak2 has a reputation beyond reputetakjak2 has a reputation beyond reputetakjak2 has a reputation beyond repute
Default

Quote:
Originally Posted by Race_Tech View Post
Would you guys be interested in a two-piece option from AP Racing like this.

Quote:
Originally Posted by Rusty View Post
__________________
Mods | Stuff | Things | Seat Time | Nismo
facebook.com/TeamSparrowSpeed
takjak2 is offline   Reply With Quote
Old 09-26-2012, 03:26 PM   #36 (permalink)
Base Member
 
Join Date: Sep 2012
Location: Lebanon
Posts: 159
Drives: Volvo T5-R
Rep Power: 12
Fishey is a jewel in the roughFishey is a jewel in the roughFishey is a jewel in the rough
Default

If you are going to spend the money on a 2pc rotor setup you should do one that is full floating if you really want it to work as advertised.


or this style


I perfer the top style because there is less chance of a hat failure IMHO.

Also, the bolts on the top one should be safety wired.

2pc rotors like others posted in this thread that are simply bolted to a aluminum hub don't offer nearly as many benefits and are prone to failure when tracked hard. They do not allow for expansion at the hub joint and as a result can cause fractures at the hub resulting in failure. They also do not help at all in preventing knock-back on the pads that all sports cars see as a result of hub-flex. This is even more true if you are a hard driver and really push the curbs as they cause a great deal of deflection.

A pretty cool video showing some deflection from curbs on F1 cars. (No one takes these kinds of footage from normal race cars! To bad cause its pretty sweet!)

http://www.streetfire.net/video/f1-in-slomo_695288.htm
-Your Pal
Fishey

Last edited by Fishey; 09-26-2012 at 03:49 PM.
Fishey is offline   Reply With Quote
Old 09-26-2012, 06:07 PM   #37 (permalink)
Base Member
 
Race_Tech's Avatar
 
Join Date: Sep 2012
Location: Tampa
Posts: 58
Drives: S4 Race Car, IS350
Rep Power: 12
Race_Tech is on a distinguished road
Default

Not entirely true. You dont need to have the bolts wire locked. However the AP Racing kit above does have bolts which allow you to do so if you would like. Those are the same bolts and hardware that is supplied to 70% of the Nascar field and have not seen one single failure!

AP rotors pictured above are full floating at a float of .25-.30mm and since that is the only picture posted on this thread I will assume your comments are directly related to it which I will have to point out are incorrect. This is a true full float system, it is not bolted. The second picture is a float in bell system and is even better at radial and axial float but it is not as ideal of a system on a street car because of possible excess wear on the bell.
Race_Tech is offline   Reply With Quote
Old 09-26-2012, 06:11 PM   #38 (permalink)
The370Z.com Sponsor
 
Mike's Avatar
 
Join Date: Jun 2009
Location: Loganville, GA
Posts: 5,944
Drives: 370z
Rep Power: 2185
Mike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond repute
Default

Quote:
Originally Posted by ChrisSlicks View Post
Not sure that is necessarily true. With most 2-piece rotors you have to replace all the mounting hardware at the same time so you end up paying about the same long term. The AP rings alone cost me more than a set of solid StopTechs but they will last 12+ track days instead of 6.
.
Stoptech rotors come with the hardware. At least my replacement set did. I got probably at least 12 days on them. Replaced due to minor stress cracks, but probably didn't need to yet.
__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968
Mike is offline   Reply With Quote
Old 09-26-2012, 06:16 PM   #39 (permalink)
Base Member
 
Race_Tech's Avatar
 
Join Date: Sep 2012
Location: Tampa
Posts: 58
Drives: S4 Race Car, IS350
Rep Power: 12
Race_Tech is on a distinguished road
Default

Yeah all stoptech rings come with replacement hardware.

You should not be worried by small cracks less than 4-5mm is acceptable. However if you have cracks starting from the ID or OD of the rotor ring it MUST be replaced.

I will agree with above. You will expect to pay much more for Brembo, AP, and Alcon rotor rings but generally speaking they will all outlast parts from Stoptech and smaller manufacturers. The money spent on one AP rotor set is a high initial cost but in the long run saves you money.
Race_Tech is offline   Reply With Quote
Old 09-26-2012, 06:18 PM   #40 (permalink)
The370Z.com Sponsor
 
Mike's Avatar
 
Join Date: Jun 2009
Location: Loganville, GA
Posts: 5,944
Drives: 370z
Rep Power: 2185
Mike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond repute
Default

Quote:
Originally Posted by Cmike2780 View Post
It's a bit hard to believe drilled rotors are as bad as some people make them out to be considering it's still widely used in a lot of high end sports cars.
I think thats mostly for looks, the percentage of high-end sports cars that actually see serious track duty is as small as any other type of car, probably less than 1% of drivers actually go to the track.

Quote:
Originally Posted by ChrisSlicks View Post
, if the paint is discolored and weird, then it is track ... except for Mike's because he powdercoats them after each event
HaHa! My stoptech trophys are hard anodized and they stay nice looking. Before that, I just powdercoated my calipers satin black because thats what they were gonna be anyway!

This is how hot one piece rotors and stock akebono's can get. XP12 pads were used. You can see the powdercoat melted around the hub and discolored on the spokes of the wheel. What you can't see is the runs in the powdercoat on the spokes also.
__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968
Mike is offline   Reply With Quote
Old 09-26-2012, 06:31 PM   #41 (permalink)
Base Member
 
Race_Tech's Avatar
 
Join Date: Sep 2012
Location: Tampa
Posts: 58
Drives: S4 Race Car, IS350
Rep Power: 12
Race_Tech is on a distinguished road
Default

Drilled rotors are mainly used on performance street cars. They do this for wet weather performance.

As far as the picture...All of that heat is going straight to the hub and wheel bearings! Yikes. 2-Piece FTW
Mike likes this.
Race_Tech is offline   Reply With Quote
Old 09-26-2012, 06:41 PM   #42 (permalink)
The370Z.com Sponsor
 
Mike's Avatar
 
Join Date: Jun 2009
Location: Loganville, GA
Posts: 5,944
Drives: 370z
Rep Power: 2185
Mike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond repute
Default

Quote:
Originally Posted by Race_Tech View Post

As far as the picture...All of that heat is going straight to the hub and wheel bearings! Yikes. 2-Piece FTW
Yes, I have a stoptech trophy system and stillen brake ducts now. No issues other than rapid pad wear. I get about 3 weekends out of a set.
__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968
Mike is offline   Reply With Quote
Old 09-26-2012, 06:46 PM   #43 (permalink)
Base Member
 
Race_Tech's Avatar
 
Join Date: Sep 2012
Location: Tampa
Posts: 58
Drives: S4 Race Car, IS350
Rep Power: 12
Race_Tech is on a distinguished road
Default

What pads do you/ have you used?
Race_Tech is offline   Reply With Quote
Old 09-26-2012, 06:56 PM   #44 (permalink)
The370Z.com Sponsor
 
Mike's Avatar
 
Join Date: Jun 2009
Location: Loganville, GA
Posts: 5,944
Drives: 370z
Rep Power: 2185
Mike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond reputeMike has a reputation beyond repute
Default

Carbotech XP-12 and RP-2. I have used Ferodo 3000 in the past once too. Using Hawk blue this weekend due to late ordering and availability.

Carbotech is my favorite though and I'm very loyal to them because they actually shut down the production line once to make me a set of pads in time for a track day the next day.
__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968
Mike is offline   Reply With Quote
Old 09-26-2012, 07:00 PM   #45 (permalink)
Base Member
 
Race_Tech's Avatar
 
Join Date: Sep 2012
Location: Tampa
Posts: 58
Drives: S4 Race Car, IS350
Rep Power: 12
Race_Tech is on a distinguished road
Default

Was this the Ferodo part number that you used before?

FRP3054R-N
Race_Tech is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Powerslot brake rotors!! Both applications available!! corner3garage Suspension/Brakes 358 02-14-2015 05:09 PM
[FOR SALE] OEM Sport Package Brake Rotors sajonf Parts for sale (Private Classifieds) 9 07-11-2011 09:11 AM
D B A 5000s brake rotors jnaut Brakes & Suspension 5 07-27-2010 10:46 AM
Cryogenically Frozen Brake Rotors LUVZTTZ Brakes & Suspension 8 07-13-2009 08:19 PM
Stoptech brake rotors ChrisSlicks Brakes & Suspension 25 06-13-2009 03:53 AM


All times are GMT -5. The time now is 10:08 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2