Still having stability issues

Rusty · 07-18-2019, 09:27 PM

Quote:

Originally Posted by shadow85

So I emailed SPL aswell with my alignment report to see what their suggestion also is.

This is what they replied with:

"I would get bumpsteer adjustable front tie rod ends and check the rear bushings for the dartiness. A camber arm would not be a bad idea in the rear to get the camber equal on each side and get rid of the deflection in that bushing. The traction arm might also help if you are lowered to keep the toe from changing in the rear to get the car from moving around on you."

You need the SPL upper arms to adjust for camber and caster. The dartiness is from the rear toe. Once you get the SPL upper arms. Try these align specs.

Front camber -1.7
Caster +6
Toe 1/16" in

Rear camber -1.7
Toe 1/16" in

These are good street specs. If you want more of track spec. You increase camber, and start to get the toe closer to zero. Then the car becomes darty.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY YAW sensor Switch (how to deactivate stability control)	Just1nfj	DIY Section (Do-It-Yourself)	18	09-12-2023 12:54 PM
370Z Drift Project + angle + stability + control	URA	Track / Autocross / Drifting / Dragstrip	47	01-31-2017 09:09 AM
Highspeed Dynamic Stability Control Question	Troyz	Nissan 370Z General Discussions	9	09-28-2013 10:06 AM
370 z Stability problem	Ghaz	Wheels & Tires	11	07-08-2013 12:28 PM
lateral stability problem	TKomodo	Wheels & Tires	16	10-21-2012 06:44 PM