Bell Raceworks Diff Brace Install

Rusty · 02-13-2019, 09:54 PM

Here's a good pic of the diff and sub-frame. You could make a brace that's goes over the top of the diff, top 4 bolt holes. and bolt to the top of the sub-frame. That would really lock the diff into place. But you would have to drop the sub- frame to install it. Something many are not willing to do.

Chit, now I have an idea running loose inside my head.

cv129 · 02-13-2019, 09:55 PM

Has your comment been “approved”? I only see one good review on Z1’s website.

Rusty · 02-13-2019, 09:57 PM

Quote:

Originally Posted by cv129

Has your comment been “approved”? I only see one good review on Z1’s website.

Just checked. Hell NO!. I figured as much.

Rusty · 02-14-2019, 11:12 PM

The diff brace is installed.

1st and 2nd pic's. This is the nut piece that goes in the sub-frame.

3rd pic is where it goes.

4th pic. Here's looking at the hole from where the spring bucket arm mounts to the sub-frame. The nut gets installed from this side.

Rusty · 02-14-2019, 11:19 PM

Install the brace to the diff. Leave the bolts loose so that you can wiggle the brace a little to help getting the bolt started into the nut piece

1st pic, I put the nut piece on my wrench and put it inside the sub-frame, and put it into the hole.

2nd pic. The bolt is tighten down.

3rd pic. Tighten the bolts on the diff.

4th pic. Installing the sub-frame back into the Z.

redondoaveb · 02-14-2019, 11:51 PM

Quote:

Originally Posted by Rusty

Install the brace to the diff. Leave the bolts loose so that you can wiggle the brace a little to help getting the bolt started into the nut piece

1st pic, I put the nut piece on my wrench and put it inside the sub-frame, and put it into the hole.

2nd pic. The bolt is tighten down.

3rd pic. Tighten the bolts on the diff.

4th pic. Installing the sub-frame back into the Z.

Looks great!

Rusty · 02-15-2019, 12:34 AM

Quote:

Originally Posted by redondoaveb

Looks great!

NorthStyle · 02-15-2019, 09:56 AM

So Rusty, how long before you start making them for the rest of us with the FI exhaust?

Rusty · 02-15-2019, 12:10 PM

Quote:

Originally Posted by NorthStyle

So Rusty, how long before you start making them for the rest of us with the FI exhaust?

Depends on the demand.

jchammond · 02-16-2019, 04:13 AM

A tight fit; reminds me of a little work I did fitting a +38 offset 19x12 w/345/30’s on rear...with minimal negative camber. Traction arm’s had to be shaved a bit & different headed bolts

Rusty · 02-19-2019, 05:34 PM

Z1 still hasn't posted my review of the brace.

jwick · 02-19-2019, 05:43 PM

Quote:

Originally Posted by Rusty

Z1 still hasn't posted my review of the brace.

They won’t

solidus · 02-19-2019, 06:43 PM

Quote:

Originally Posted by Rusty

Z1 still hasn't posted my review of the brace.

That's why I did'nt post a review of their metal 3 bolt gaskets. They should be appropriately named "fackyaself" gaskets. You go through all that heartache for a leak then as soon as you do a shakedown you have to do it again to replace the leaking fix for the leaks.

cv129 · 02-19-2019, 06:52 PM

Quote:

Originally Posted by solidus

That's why I did'nt post a review of their metal 3 bolt gaskets. They should be appropriately named "fackyaself" gaskets. You go through all that heartache for a leak then as soon as you do a shakedown you have to do it again to replace the leaking fix for the leaks.

Whoa, that's good to know.

Hotrodz · 02-19-2019, 09:29 PM

Quote:

Originally Posted by solidus

That's why I did'nt post a review of their metal 3 bolt gaskets. They should be appropriately named "fackyaself" gaskets. You go through all that heartache for a leak then as soon as you do a shakedown you have to do it again to replace the leaking fix for the leaks.

LOL, I think I have set of those worthless things too!

02-13-2019, 09:55 PM	#77 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,192 Drives: 09 Nismo, 16 Nismo Rep Power: 159827	Has your comment been “approved”? I only see one good review on Z1’s website. Rusty and redondoaveb like this. __________________ Setrab \| RE-71 \| SPL \| JRZ \| Nismo \| ARK \| Whiteline \| RacingBrake \| CJM Oil Pan \| Ti shield

02-15-2019, 09:56 AM	#83 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,235 Drives: 2011 370Z Nismo Rep Power: 24276	So Rusty, how long before you start making them for the rest of us with the FI exhaust? Rusty, Hotrodz, ZontheRocks and 2 others like this.

02-16-2019, 04:13 AM	#85 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 57 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684394	A tight fit; reminds me of a little work I did fitting a +38 offset 19x12 w/345/30’s on rear...with minimal negative camber. Traction arm’s had to be shaved a bit & different headed bolts Rusty likes this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

02-19-2019, 05:34 PM	#86 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 34,864 Drives: 2011 Nismo GM 6M Rep Power: 2684436	Z1 still hasn't posted my review of the brace. redondoaveb likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
2015+ Nismo Rear Chassis Brace Install	nismolucino	DIY Section (Do-It-Yourself)	9	02-22-2021 11:00 AM
Z1 Brake Master Cylinder Brace - Install Help	140BPM	Brakes & Suspension	10	04-22-2019 09:06 PM
Has anyone been able to install a Z1 master cylinder brace?	gshort24	Brakes & Suspension	4	08-11-2016 02:05 PM
Rear brace bar removal/install?	TriNismo	Exterior & Interior	8	08-17-2015 11:02 PM