370Z Drift Comp Car

ChrisDrift

Got the engine out of the 370 today.

I found a thread on this forum where someone lifted the engine using the bolts that normally hold the intake manifold on so I went for a similar technique. Wanted some welding practice before I start making all the stuff for this build so I made these lifting points





Probably massively overkill but did the job and got the engine out (had already removed the gearbox beforehand)





Will be taking engine and everything out of the 350 over the weekend, then will put it in the 370 chassis and see if we're going to need to make custom engine/trans mounts or need a custom prop shaft etc

__________________
Me drifting/crashing my 350Z and 370Z: https://youtube.com/ChrisDriftVideo