Oil Cooler/Temp issue (no it's not what your thinking)

2011 Nismo#91 · 10-16-2017, 02:03 PM

So I think I am getting pretty decent at this

thing and pushing the car to what I think it's capable of but..

I was at the track this weekend and the air temps were in the low to mid 60s the whole weekend. With a 34 row oil cooler the gauge was reading 260, same as it was when I had the 25 row cooler. Engine Coolant Temps Peak at 230F.

Is there something wrong with the oil cooler? It seems to be working when not at the track. Temps get to 180 and usually stay there so I think the thermostatic sandwich plate is working correctly. Maybe it's a flow issue? I really hope I won't have to add more cooling but I am suspecting I will.

Thoughts?

AlWakRa · 10-16-2017, 03:28 PM

I tracked my car @ 95 F with oil temp reaching 260 F, but didn't went over that, using Motul v300 0w40. Started around 180 F first lap, reached 250-260 F during third lap and stayed there, in a long track (around 3.375 Mile long).

Here it is, temperature not clear and it is in celsius

https://youtu.be/mkiLf00FlmA

I have 34 row as well. in cooler weather, it is around 240 F at the third lap.

only some findings to compare with yours.

Rusty · 10-16-2017, 09:39 PM

How long are your track sessions? Are they the same now as in the summer?

Couple of things that I can think of.
1. Air flow restriction. Check the cooler if there is anything covering it. Blow air through the fins backwards. If anything is stuck in the fins. This should help in removing it.
2. Thermostatic plate failing. Never heard of one failing to open, but there is always a first time. Would have to change to a new plate to find out. But it works ok on the street. So I don't think it would be this.
3. Your track sessions have gotten longer, and you never noticed.
4. You now have reached the point where you need to up-grade.

echoshotz · 10-16-2017, 09:46 PM

some people have had to run two coolers in succession to get adequate cooling. You're probably just killing it out there haha. keep on

Hotrodz · 10-16-2017, 11:00 PM

I don't run a sandwich plate as it is always warm here in AZ and I had no problem with my 34 row until temps got up in the 90's but we don't have much humidity here. Rusty suggestions are spot on. I went to a 72 oil cooler and opened up my front bumper to get better air flow. Also, you may need a vented hood or hood vents to help get the hot air out.

Rusty · 10-16-2017, 11:12 PM

Well.........you need all those vents to keep the 600 squirrels cooled.

2011 Nismo#91 · 10-17-2017, 08:16 AM

Quote:

Originally Posted by Rusty

How long are your track sessions? Are they the same now as in the summer?

Couple of things that I can think of.
1. Air flow restriction. Check the cooler if there is anything covering it. Blow air through the fins backwards. If anything is stuck in the fins. This should help in removing it.
2. Thermostatic plate failing. Never heard of one failing to open, but there is always a first time. Would have to change to a new plate to find out. But it works ok on the street. So I don't think it would be this.
3. Your track sessions have gotten longer, and you never noticed.
4. You now have reached the point where you need to up-grade.

1st Lap 160 ->180 (warm up)
2nd Lap 180 ->220
3rd Lap 220 -> 240
4th Lap 240 -> 250
5th Lap 250 ~255ish before the lap finishes and stays at the same point the rest of the session.
Lap 2.25 Miles 1m37s~ average pace Sessions are from 20-25min

It might be the 2015+ nismo bumper lets less air through then the earlier version I had. I have to look at some of my earlier videos this year in detail and see what was going on then.

Hotrodz · 10-17-2017, 09:09 AM

Quote:

Originally Posted by 2011 Nismo#91

[COLOR="Red"]t might be the 2015+ nismo bumper lets less air through then the earlier version I had. I have to look at some of my earlier videos this year in detail and see what was going on then.

I was going to buy a 15+ bumper and that was one of the questions I had asked Juan at Nissan Race Shops and he said that to stay with pre 14 Nismo bumper. I also had read in an article before Doran Racing left IMSA that they did not switch to the 15 design because of lack of air flow compared to the 14 Nismo.

Rusty · 10-17-2017, 10:06 AM

Quote:

Originally Posted by Hotrodz

I was going to buy a 15+ bumper and that was one of the questions I had asked Juan at Nissan Race Shops and he said that to stay with pre 14 Nismo bumper. I also had read in an article before Doran Racing left IMSA that they did not switch to the 15 design because of lack of air flow compared to the 14 Nismo.

I asked BJ when Doran Racing was going to change to the new ('15) body work. He said hopefully never. He said the aero is not as good with the '15 bumpers. Has alot of dirty air flow.

derraj06 · 11-16-2017, 09:25 AM

Like others have suggested, I would look into airflow issues first. I have found on mine that when I had an Air to oil cooler installed I would get debris build up between the core and the radiator. I have also found as much as 40 degree temp swings on track depending on the ducting being deployed around the radiator. Less ducting to keep air going through the radiator area quickly raised the temps.

2011 Nismo#91 · 11-16-2017, 02:52 PM

It's defiantly an airflow issue, as much as I like the new style front end from looking at in detail over the last weekend the opening is significantly smaller then any other oem one. I will probably change to a stillen front end for the ease of brake ducting.

Eagle · 11-28-2017, 07:38 PM

Hit limp mode in October, 80 degree weather with a 34 row setrab, temps were 260 and above. Drive hard enough even a 34 row can't stop that from happening. Dual 25's, 34's or a 72 row should do the trick

Arc_Flash · 01-15-2018, 12:10 PM

I have run into this engine oil heat issue as well. It seems that even with the 34 row coolers we can’t keep our temps down.

I Track mostly down in south Texas at MSR Houston where we have seen track surface temps at 120F-130F at the hottest with 90F summer days. Even on a 55F day I hit 240F oil temp while short shifting to keep temps down.

From what I have read around the forum I would need two 34 row oil coolers just to keep my temps at 240F-260F on a hot day. It Seems to me that the AAM Oil to water cooler would be best in most applications with tracks in the south.

Is there a reason this hasn’t been used more?

P.S. I understand that automotive oil has a goldilocks area around 212F +/- 10F and it seems that air to oil heat exchangers cannot properly cool our oil to anywhere within that range.

TL: DR : Why not use Oil to Water coolers??

Spooler · 01-15-2018, 12:48 PM

Quote:

Originally Posted by Arc_Flash

I have run into this engine oil heat issue as well. It seems that even with the 34 row coolers we can’t keep our temps down.

I Track mostly down in south Texas at MSR Houston where we have seen track surface temps at 120F-130F at the hottest with 90F summer days. Even on a 55F day I hit 240F oil temp while short shifting to keep temps down.

From what I have read around the forum I would need two 34 row oil coolers just to keep my temps at 240F-260F on a hot day. It Seems to me that the AAM Oil to water cooler would be best in most applications with tracks in the south.

Is there a reason this hasn’t been used more?

P.S. I understand that automotive oil has a goldilocks area around 212F +/- 10F and it seems that air to oil heat exchangers cannot properly cool our oil to anywhere within that range.

TL: DR : Why not use Oil to Water coolers??

Because it just moves the heat issue to the cooling system of the car. Aftermarket radiators are sketchy at best. They always spring leaks.

Arc_Flash · 01-15-2018, 02:10 PM

What you say is true, but is that assuming the stock radiator can’t handle the addition thermo load?

Going only by what I can see online it seems that even the FI TT kits and AAM TT kits don’t include Upgraded radiators. This seems to hint that the stock radiator can handle addition horse power well enough for a street application.

If it is true that the stock rad can handle a turbo application, it doesn’t seem too hard to believe a N/A 370z rad could handle the additional load from cooling the oil.

Now a TT 370z with an oil to water exchanger might need a rad upgrade.

TL: DR : If a TT 370 doesn’t require a rad upgrade why cant the stock rad handle cooling the oil?

What radiators are known to leak? (so I can avoid)

10-16-2017, 02:03 PM	#1 (permalink)
2011 Nismo#91 A True Z Fanatic Join Date: Mar 2011 Location: NJ Posts: 2,412 Drives: slowly Rep Power: 40570	Oil Cooler/Temp issue (no it's not what your thinking) So I think I am getting pretty decent at this thing and pushing the car to what I think it's capable of but.. I was at the track this weekend and the air temps were in the low to mid 60s the whole weekend. With a 34 row oil cooler the gauge was reading 260, same as it was when I had the 25 row cooler. Engine Coolant Temps Peak at 230F. Is there something wrong with the oil cooler? It seems to be working when not at the track. Temps get to 180 and usually stay there so I think the thermostatic sandwich plate is working correctly. Maybe it's a flow issue? I really hope I won't have to add more cooling but I am suspecting I will. Thoughts? __________________ GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs Last edited by 2011 Nismo#91; 10-16-2017 at 03:42 PM.

10-16-2017, 03:28 PM	#2 (permalink)
AlWakRa Track Member Join Date: Oct 2010 Location: Qatar Posts: 600 Drives: 10 370Z PW 6MT Rep Power: 13450	I tracked my car @ 95 F with oil temp reaching 260 F, but didn't went over that, using Motul v300 0w40. Started around 180 F first lap, reached 250-260 F during third lap and stayed there, in a long track (around 3.375 Mile long). Here it is, temperature not clear and it is in celsius https://youtu.be/mkiLf00FlmA I have 34 row as well. in cooler weather, it is around 240 F at the third lap. only some findings to compare with yours. 2011 Nismo#91 likes this. __________________ 2010 370Z Touring Sport Pearl White 6MT Powered by: Fast Intentions - Motordyne - Stillen - OS Giken - CJ Motorsports - Mishimoto - MCA Suspension - SPL - SuperPRO - RJM - Z1 Motorsport - Zspeed - Volk My Humble Journals

10-16-2017, 09:39 PM	#3 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,488 Drives: 2011 Nismo GM 6M Rep Power: 2684438	How long are your track sessions? Are they the same now as in the summer? Couple of things that I can think of. 1. Air flow restriction. Check the cooler if there is anything covering it. Blow air through the fins backwards. If anything is stuck in the fins. This should help in removing it. 2. Thermostatic plate failing. Never heard of one failing to open, but there is always a first time. Would have to change to a new plate to find out. But it works ok on the street. So I don't think it would be this. 3. Your track sessions have gotten longer, and you never noticed. 4. You now have reached the point where you need to up-grade. Hotrodz and Leadfooted like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html Last edited by Rusty; 10-16-2017 at 09:42 PM.

10-16-2017, 09:46 PM	#4 (permalink)
echoshotz Base Member Join Date: May 2015 Location: Knoxville, TN Posts: 218 Drives: 14 Nismo Rep Power: 74	some people have had to run two coolers in succession to get adequate cooling. You're probably just killing it out there haha. keep on Eagle likes this. __________________ 2014 Solid Red Nismo 370z Motordyne\|Synergy Composites\|Stance Suspension\|Recaro\|RJM\|EVOR

10-16-2017, 11:00 PM	#5 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I don't run a sandwich plate as it is always warm here in AZ and I had no problem with my 34 row until temps got up in the 90's but we don't have much humidity here. Rusty suggestions are spot on. I went to a 72 oil cooler and opened up my front bumper to get better air flow. Also, you may need a vented hood or hood vents to help get the hot air out. Rusty, wideglideleon and MrPostman like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

10-16-2017, 11:12 PM	#6 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 69 Posts: 35,488 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Well.........you need all those vents to keep the 600 squirrels cooled. Hotrodz likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

11-16-2017, 09:25 AM	#10 (permalink)
derraj06 Enthusiast Member Join Date: Jun 2013 Location: Huntsville, AL Posts: 406 Drives: MB 370z Rep Power: 13	Like others have suggested, I would look into airflow issues first. I have found on mine that when I had an Air to oil cooler installed I would get debris build up between the core and the radiator. I have also found as much as 40 degree temp swings on track depending on the ducting being deployed around the radiator. Less ducting to keep air going through the radiator area quickly raised the temps. __________________ 2010 Monterey Blue 370Z

11-16-2017, 02:52 PM	#11 (permalink)
2011 Nismo#91 A True Z Fanatic Join Date: Mar 2011 Location: NJ Posts: 2,412 Drives: slowly Rep Power: 40570	It's defiantly an airflow issue, as much as I like the new style front end from looking at in detail over the last weekend the opening is significantly smaller then any other oem one. I will probably change to a stillen front end for the ease of brake ducting. __________________ GTR TT 493Whp/431lbft, Ecutek, Southbend 6puck,Quaife, RPM RollBar 4Point, R888R, JRZ RSPro F(10R/10C) R(10R/6C) 1000f500r inlbs+150inlbs Tender, SPL everywhere.Full Specs

11-28-2017, 07:38 PM	#12 (permalink)
Eagle Track Member Join Date: Jan 2011 Location: South Orange County, CA Posts: 904 Drives: 2011 370z Red 6MT Rep Power: 10657	Hit limp mode in October, 80 degree weather with a 34 row setrab, temps were 260 and above. Drive hard enough even a 34 row can't stop that from happening. Dual 25's, 34's or a 72 row should do the trick 2011 Nismo#91 and Hotrodz like this. __________________ nismo\| EVO-R High Wing \| *Stillen* Gen 3 CAI \| SEIBON TS Hood \| Z1 34 Row Oil Cooler \| VMR 810 Wheels \| Endless MX72 Pads \|*Sabelt* GT-140 Seat \|Fly1Motorsports RS1 Fenders \| Hotchkis Front Sway Bar \| Berk HFC \|

01-15-2018, 12:10 PM	#13 (permalink)
Arc_Flash Base Member Join Date: Apr 2017 Location: Houston Posts: 3 Drives: 2017 Nismo M6 Rep Power: 9	I have run into this engine oil heat issue as well. It seems that even with the 34 row coolers we can’t keep our temps down. I Track mostly down in south Texas at MSR Houston where we have seen track surface temps at 120F-130F at the hottest with 90F summer days. Even on a 55F day I hit 240F oil temp while short shifting to keep temps down. From what I have read around the forum I would need two 34 row oil coolers just to keep my temps at 240F-260F on a hot day. It Seems to me that the AAM Oil to water cooler would be best in most applications with tracks in the south. Is there a reason this hasn’t been used more? P.S. I understand that automotive oil has a goldilocks area around 212F +/- 10F and it seems that air to oil heat exchangers cannot properly cool our oil to anywhere within that range. TL: DR : Why not use Oil to Water coolers??

01-15-2018, 02:10 PM	#15 (permalink)
Arc_Flash Base Member Join Date: Apr 2017 Location: Houston Posts: 3 Drives: 2017 Nismo M6 Rep Power: 9	What you say is true, but is that assuming the stock radiator can’t handle the addition thermo load? Going only by what I can see online it seems that even the FI TT kits and AAM TT kits don’t include Upgraded radiators. This seems to hint that the stock radiator can handle addition horse power well enough for a street application. If it is true that the stock rad can handle a turbo application, it doesn’t seem too hard to believe a N/A 370z rad could handle the additional load from cooling the oil. Now a TT 370z with an oil to water exchanger might need a rad upgrade. TL: DR : If a TT 370 doesn’t require a rad upgrade why cant the stock rad handle cooling the oil? What radiators are known to leak? (so I can avoid)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Volume, Fan, Temp & Tone/Bal Knobs/Dials issue	MoulaZ	Exterior & Interior	7	06-19-2015 05:24 PM
Not getting up to temp with oil cooler?	xdeslitx	Southern California Region	38	03-15-2012 10:07 PM
SOLD: GTM Differential Cooler / Mounting Shroud / Temp Controller	Equinox	Parts for sale (Private Classifieds)	9	01-04-2012 07:49 PM
Oil temp issues - USA issue only??	Mr Ed	Australia/New Zealand	6	09-07-2009 12:16 AM
Road&Track Magazine also mentions oil temp issue	FairmanZ	Nissan 370Z General Discussions	0	04-02-2009 11:40 PM