11-05-2016, 10:01 PM
|
#19 (permalink)
|
|
Base Member
Join Date: Nov 2011
Location: St petersburg, FL
Posts: 90
Drives: 14 370Z nismo
Rep Power: 15
|
Quote:
Originally Posted by jchammond
 
Yes, mine is a 20-22ga. Green wire; I used 14ga.red from power source & orange back to the sensor side.
3rd prong on switch is for a ground/ but that would cause switch to stay illuminated all the time, unless I kept it in drift mode.
Also moved my hazard switch to rt. Side of. Console.
Hopefully you'll figure it out; cause doughnuts etc...no issues at all.
Sent from my iPhone using Tapatalk |
Thanks so much for sharing!
Unfortunately I've decided to unhook the VDC from the yaw sensor switch instead of making a switch because I'm WELDING THE DIFFERENTIAL and there's no point on keeping the VDC at this point.
Just in case you're wondering, I've changed my mind recently when I found out that the VLSD is actually not as steady as one would think for drifting, thus giving me no option but to weld it. In previous research I had been informed the VLSD would be enough for drifting. Bad info.
Thank you!
|
|
|
Similar Threads
39Likes
Threaded Mode
