HELP! trying to find best way to turn VDC off 100%

jchammond

Yes, mine is a 20-22ga. Green wire; I used 14ga.red from power source & orange back to the sensor side.
3rd prong on switch is for a ground/ but that would cause switch to stay illuminated all the time, unless I kept it in drift mode.
Also moved my hazard switch to rt. Side of. Console.
Hopefully you'll figure it out; cause doughnuts etc...no issues at all.


Sent from my iPhone using Tapatalk

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html

makugx

Thanks so much for sharing!
Unfortunately I've decided to unhook the VDC from the yaw sensor switch instead of making a switch because I'm WELDING THE DIFFERENTIAL and there's no point on keeping the VDC at this point.

Just in case you're wondering, I've changed my mind recently when I found out that the VLSD is actually not as steady as one would think for drifting, thus giving me no option but to weld it. In previous research I had been informed the VLSD would be enough for drifting. Bad info.

Thank you!