I'm debating this very thing. I've had it on the soft setting since installing it about six months ago. Handles great, but need to give the firm setting a try. What's the biggest difference that you noticed between the two settings? I'm also running the stock rear sway.

I honestly like the stiff setting best. The turn in feels great and it actually helped dial out most of the understeer I experienced during spirited drives. Generally too stiff in the front will add understeer on a rwd car but itll take a pretty stiff bar for that to happen in our cars. The Z needs all the bar it can get up front. Even on stiff, I have no problem getting the rear to rotate how I want using the throttle. Coupled with Swift springs and a good alignment, am pleased with how it handles at the moment.

Only reason I changed to the soft setting end of last year was due to bad roads around here. The difference isn't night and day but it was more comfortable when my wife and I were cruising around town. Soft is a good compromise from the stock bar. It still understeers but not as bad.

Rolled 399,000 kms today...almost there.

dayam!! :tup:

:iagree:

http://i1087.photobucket.com/albums/...psiigt5vud.jpg
So with the center console out ummm well I needed a cupholder and I guess that some spare oil insnt a bad thing to have around lol

nothing today but tomorrow, new tires, install of coil overs, camber and toe arms and install of a 34 row oil cooler :D and a fly1 front lip

Got new shoes 265/305 S-04's & added factory splash guards. Also added Z1 fuca (not pictured)

1st time ever "service engine light" came on. Hooked up OBD2, P0101 code, cleaned air filter/box area and MAF then reset. Then to test it, took the Z on one of my favorite driving routes in East Oahu this morning. All's well and Zorro's running like a champ :driving:

found the button to shut off the VDC… and then I pressed it!!

Yess finally back on the ground

http://i207.photobucket.com/albums/b...61629a_HDR.jpg

Lookin like a pimp!

Sent from my SM-N910P using Tapatalk

Plus, you've got Arby's.

Good info, b15. Thanks for the feedback. I think I'll change to the firm setting before ZDayZ. Things feel good now, but kept wondering if they would feel even better by changing the setting.

Rolled her over on 8000 miles yesterday and today, got an oil change.

http://www.the370z.com/members/hulag...8010-miles.jpg

:tiphat: let me know what you think.

Have fun at zdayz! I wanted to go this year but having a baby changes things. One of these years I'll get out there

Saw a Z on the road when I ran to get a burrito for dinner. I almost shed a tear. It was covered it dirt and salt from the roads. Front driver's side headlight was out.

What kinda borrito? Need dinner ideas:yum:

Will do. Sorry you won't be a ZDayZ this year, but family comes first, for sure. Look forward to you making it next year, though! :tup:

pulled out my Z for the first drive of the season. :p had a great time. qd'ed afterwards.

Getting alignment done and wheels balanced at the stealership :)

Installed Hotchkins front sway bar and put the summer wheels on. Avant Garde M550 (9.5/11) and Bridgeston S04 (255/305).

I changed out the exhaust that came with my car when I bought it to one I loved when I had it on my g35

Old:
http://i1215.photobucket.com/albums/...pso0c4ykmq.jpg

New:
http://i1215.photobucket.com/albums/...psk6kwstnt.jpg

Beluga to Motordyne

Alignment and wheel balance fixed....didnt realize how far out of spec the alignment was lol

What kind of ramps are those?? I'm thinking of getting the raceramps. Getting tired of fighting with Jack points for my Z.

They're PowerRamp ramps but they're the same thing as RhinoRamps. They're so much more convenient than jacking up the car. The only problem I've notice in the past was if I was lowered and went to drive forward onto them (to change my oil for example) the bottom of my front bumper would sometimes push the ramps forward. I solved that problem with putting two pieces of wood before the ramp to raise the car up a half inch. Other than that, 10x better than messing around with a jack and jackstands.

rhino ramps are A+, get thw wider ones and most lb.(pound rating). U do need a piece of 2x something for the front.

Terrible news for my Z... took it to the shop Friday to do the MSC/HD CSC swap and I get a call Saturday saying the bleeder on the CSC is leaking.

:( contacted Z-speed and now Monday seems like a million hours from now (even with day light savings)

On the bright side I'm glad I did it early instead of near zdayz so I can hammer out any of these silly kinks and be on with the gong show err fun =)

I always liked these style exhaust but they hang way lower than the factory style. Any scraping issues with that?

The new one looks way lower that your original pic exhaust

Who can get away with bringing things like this in the house?Attachment 112605


Sent from my iPhone using Tapatalk

Got my 1st set of sponsored shoes mounted ... vertini dynasty 20x9. 20x10.5

The answer to who can get away with it is this:

1. Single guys
2. Guys who are about to be single

I am here to help.

:icon18:

:bowrofl::roflpuke2::inoutroflpuke::rofl2:

Since mine is still in storage and I can't read the paint code, what's the general consensus on my cars color? I believe it's the platinum graphite (K51). I need to order some OEM parts....

http://i1097.photobucket.com/albums/...ps44b7gxaq.jpg

Yeah the old one, Beluga Racing, sat higher than the Motordyne but so far no scraping. I'm at stock ride height and have gone into some pretty uneven parking lot entrances since Saturday. I don't think the exhaust hangs much lower than any cross bracing.

I can't comment on the height of the Motordyne vs stock exhaust because when I bought the car it came with the Beluga.

Thanks for confirming was wondering about that style exhaust!! Looks good and happy to hear of no scraping

I think it is a very pretty shade of graphite :yum:

Or maybe gunmetal...

Still :yum:

Lol. Sorry for being no help. Still :yum:

On Saturday Harry received his first bath of the 2016 driving season.

:woot:

It's always nice just hearing from you MSBC. Hope all is well. I only have to wait another week or 2 to get mine out of storage to figure out the paint code anyways.