What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

redondoaveb · 01-18-2018, 08:00 PM

A2a kit, 9lb pulley. 472 on 91 octane, 541 on e85.
https://www.instagram.com/p/Bd1lLfBFOQJ/

JTM88 · 01-19-2018, 05:46 PM

So I was hoping to have my gears installed, but the shop said they can't get the gears to mesh. I have a suspicion that the guy I bought the diff from sold me an Auto diff and called it a manual.

Does anybody have a picture of an auto differential next to a manual?

Rusty · 01-18-2018, 08:03 PM

Quote:

Originally Posted by redondoaveb

When I had my car at Specialty Z for my sc tune, I had them install all the sensors, relays and wiring for my two gauges. Here's a crappy picture of the finished cubby panel I fabricated.

That soooooo reminds me of a robot face. Sorry.

redondoaveb · 01-18-2018, 08:19 PM

Quote:

Originally Posted by Rusty

That soooooo reminds me of a robot face. Sorry.

I'll let you get away with that because you're older than me. Actually, only a year. Dammit!

Spooler · 01-12-2018, 09:08 PM

^^^^ I love Snap-On hand tools. They are comfy in the hands. It's all I buy for hand tools.

Rusty · 01-12-2018, 09:24 PM

Quote:

Originally Posted by Spooler

^^^^ I love Snap-On hand tools. They are comfy in the hands. It's all I buy for hand tools.

That's all I use.

sx moneypit · 01-15-2018, 07:40 AM

Quote:

Originally Posted by Spooler

^^^^ I love Snap-On hand tools. They are comfy in the hands. It's all I buy for hand tools.

JLarson · 01-15-2018, 08:34 AM

Saturday, I did 20mm z1 spacers for my rear wheels (it was a nice excuse to get some thin wall sockets) and figured out how to lower my rear subframe to install the z1 bushing collars. Fairly easy install, but took me a while to figure out what I was doing with the subframe. Never did that before. More on this later when I get to really test the handling improvements.

Zingston · 01-15-2018, 10:05 AM

Paid my Z's insurance bill today...

!

jchammond · 01-15-2018, 07:14 PM

Quote:

Originally Posted by Zingston

Paid my Z's insurance bill today...

!

I bet SC is more

Rusty · 01-15-2018, 03:50 PM

Quote:

Originally Posted by sx moneypit

jchammond · 01-12-2018, 09:30 PM

My intent was to get the "0" offset & i looked up wrong pt# & got the 15*,,,so i ordered the 0 & kept the 15 as well,,,helps get that X-tra torque!

jchammond · 01-14-2018, 06:50 AM

Gonna somehow get some soap & water on here today; though the temps aren’t very good....The Sun will be shining.

Sent from my iPhone using Tapatalk

Spoiler · 01-14-2018, 07:09 AM

Quote:

Originally Posted by jchammond

Gonna somehow get some soap & water on here today; though the temps aren’t very good....The Sun will be shining.

Sent from my iPhone using Tapatalk

Was thinking the same thing here for this afternoon...

Lpcalhoun · 01-14-2018, 07:18 AM

Quote:

Originally Posted by jchammond

Gonna somehow get some soap & water on here today; though the temps aren’t very good....The Sun will be shining.

Sent from my iPhone using Tapatalk

19 degrees feels like 12 in Hotlanta, I think I'll stay inside!

Sent from my SM-G930V using Tapatalk

01-19-2018, 05:46 PM	#2 (permalink)
JTM88 Enthusiast Member Join Date: Oct 2016 Location: Houston, TX Posts: 276 Drives: 2012 370Z Rep Power: 14	So I was hoping to have my gears installed, but the shop said they can't get the gears to mesh. I have a suspicion that the guy I bought the diff from sold me an Auto diff and called it a manual. Does anybody have a picture of an auto differential next to a manual? __________________ 2012 Base Gun Metallic MT6 -CNT Racing CBE-Swift Sport Springs-Sport Akebono BBK-Z1 Motorsports Intakes-König Oversteer Wheels-1320 Resonated Test Pipes -RJM Rev 2.1 Clutch Pedal-

01-15-2018, 08:34 AM	#8 (permalink)
JLarson A True Z Fanatic Join Date: Jun 2017 Location: Media, PA Posts: 4,078 Drives: 14 Nissan 370z MR M6 Rep Power: 2684370	Saturday, I did 20mm z1 spacers for my rear wheels (it was a nice excuse to get some thin wall sockets) and figured out how to lower my rear subframe to install the z1 bushing collars. Fairly easy install, but took me a while to figure out what I was doing with the subframe. Never did that before. More on this later when I get to really test the handling improvements. __________________ 2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ 2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold)

01-12-2018, 09:30 PM	#12 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	My intent was to get the "0" offset & i looked up wrong pt# & got the 15*,,,so i ordered the 0 & kept the 15 as well,,,helps get that X-tra torque! __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

01-14-2018, 06:50 AM	#13 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Gonna somehow get some soap & water on here today; though the temps aren’t very good....The Sun will be shining. Sent from my iPhone using Tapatalk __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM

01-18-2018, 08:00 PM	#1 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,377 Drives: 2014 Nismo Gunmetal Rep Power: 2684375	A2a kit, 9lb pulley. 472 on 91 octane, 541 on e85. https://www.instagram.com/p/Bd1lLfBFOQJ/

01-12-2018, 09:08 PM	#5 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,999 Drives: 2013 Nismo 370z Rep Power: 2684392	^^^^ I love Snap-On hand tools. They are comfy in the hands. It's all I buy for hand tools.

01-15-2018, 10:05 AM	#9 (permalink)
Zingston A True Z Fanatic Join Date: May 2017 Location: Florida Posts: 4,028 Drives: like it's a rental. Rep Power: 2684370	Paid my Z's insurance bill today... !