What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

madwi · 03-31-2020, 06:49 PM

Quote:

Originally Posted by redondoaveb

It's the SOHO catch can set up.

Its freakin' cool looking.

abm89 · 03-31-2020, 06:52 PM

Quote:

Originally Posted by redondoaveb

It's the SOHO catch can set up.

very clean! I'm going to have to look that up

redondoaveb · 03-31-2020, 06:58 PM

Quote:

Originally Posted by madwi

Its freakin' cool looking.

The top of the filter was chrome, I painted it wrinkle finish black. The coolant cap was raw aluminum, I painted it wrinkle finish also.

ZontheRocks · 04-01-2020, 10:46 PM

New Box for the Shockwave was installed today. No issues and fit and finish of the piece was better than the one it replaced. I had picked up my exhaust used and it was my thought that it was one of the older builds. The welds on the new piece looked great, specifically the ones on the muffler itself, which were ground and polished smooth. Again, fit and finish were top notch. No complaints of the old piece, just happy to see that Motordyne has continued to improve on their products over the years.

Best part: exhaust is back to sounding like a true ART pipe + Shockwave monster and my power feels smoother and stronger throughout the power band.

JARblue · 04-02-2020, 07:01 AM

Yesterday I picked up some ARP wheel studs, Hotchkis billet sway bar bushings and MTec clutch springs from a local forum member

Leingod · 04-02-2020, 10:04 AM

I think mine is still in storage somewhere?

gbrettin · 04-03-2020, 12:41 PM

Been making me a Covid-19 pure carbon fiber hood. I'm nearly done with the mold. I need to put a reinforcements on the mold, BUT i'm pretty damn excited how this is moving along now.

I ordered my beauty layer of carbon fiber today! "Silver Aluminized Carbon Fiber". The hood will be 4 layers in total, middle two layers will be heavy duty 12k CF. End goal is to have a Sunoco style hood to accomodate my engine (and possible other people's needs).Full information in my build thread (figured I'd pop up for some air in these parts).

JARblue · 04-03-2020, 04:33 PM

I am a demon bolt slayer

( Click to show/hide )

madwi · 04-03-2020, 07:45 PM

Quote:

Originally Posted by gbrettin

Been making me a Covid-19 pure carbon fiber hood. I'm nearly done with the mold. I need to put a reinforcements on the mold, BUT i'm pretty damn excited how this is moving along now.

I ordered my beauty layer of carbon fiber today! "

( Click to show/hide )

Thats a large cowl!

Rusty · 04-03-2020, 11:12 PM

Quote:

Originally Posted by JARblue

I am a demon bolt slayer

( Click to show/hide )

I don't believe you. You had to pay someone to work on your Z. Because you DON'T work on your Z. You just collect parts.

JARblue · 04-04-2020, 05:46 AM

Quote:

Originally Posted by Rusty

I don't believe you. You had to pay someone to work on your Z. Because you DON'T work on your Z. You just collect parts.

Sure I do. I do the jobs 30 sec at a time

gbrettin · 04-04-2020, 06:10 AM

Quote:

Originally Posted by madwi

Thats a large cowl!

It will for my duel plenum no issue. The issue is getting it designed for the Whipple charger, RJM kit. I think I can get it to work.

- Edit: It can also be used for future LS swap people. Think Holley High Ram.

madwi · 04-04-2020, 11:24 AM

Quote:

Originally Posted by gbrettin

It will for my duel plenum no issue. The issue is getting it designed for the Whipple charger, RJM kit. I think I can get it to work.

- Edit: It can also be used for future LS swap people. Think Holley High Ram.

I didnt realize the whipple stuck up that far.

teehee · 04-04-2020, 01:33 PM

Finished upgrading my brakes

Sent from my iPhone using Tapatalk

cubsfan51 · 04-04-2020, 05:48 PM

Put the summer wheels/tires back on. Michelin PS4s all around

04-01-2020, 10:46 PM	#4549 (permalink)
ZontheRocks Track Member Join Date: Mar 2017 Location: Central Florida Posts: 934 Drives: 2016 Nissan PW 370Z Rep Power: 33079	New Box for the Shockwave was installed today. No issues and fit and finish of the piece was better than the one it replaced. I had picked up my exhaust used and it was my thought that it was one of the older builds. The welds on the new piece looked great, specifically the ones on the muffler itself, which were ground and polished smooth. Again, fit and finish were top notch. No complaints of the old piece, just happy to see that Motordyne has continued to improve on their products over the years. Best part: exhaust is back to sounding like a true ART pipe + Shockwave monster and my power feels smoother and stronger throughout the power band. God-Speed, Hotrodz, Memphis370Z and 1 others like this. __________________ '16 Pearl White Sport \| Stillen Gen. 3 \| Motordyne ART \| Motordyne Shockwave \| ZSpeed \| Powertrix \| EVO-R \| Aeroworkz \| Nismo \| Z1 \| EcuTek \| Tuned by Seb @ SpecialtyZ

04-02-2020, 07:01 AM	#4550 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,449 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Yesterday I picked up some ARP wheel studs, Hotchkis billet sway bar bushings and MTec clutch springs from a local forum member Hotrodz, abm89, Memphis370Z and 2 others like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

04-02-2020, 10:04 AM	#4551 (permalink)
Leingod A True Z Fanatic Join Date: Mar 2015 Location: Some Place Cold Posts: 16,053 Drives: In Circles Rep Power: 2684396	I think mine is still in storage somewhere? Hotrodz, Memphis370Z and ZontheRocks like this. __________________ I AM FLOOF! SOMEBODY FLOOF MY HORN!! ALL HAIL THE FLOOF!!I JUST FLOOFED ON THE FLOOR

04-03-2020, 12:41 PM	#4552 (permalink)
gbrettin A True Z Fanatic Join Date: Oct 2010 Location: Portage, MI Posts: 2,237 Drives: Tricycle Rep Power: 542172	Been making me a Covid-19 pure carbon fiber hood. I'm nearly done with the mold. I need to put a reinforcements on the mold, BUT i'm pretty damn excited how this is moving along now. I ordered my beauty layer of carbon fiber today! "Silver Aluminized Carbon Fiber". The hood will be 4 layers in total, middle two layers will be heavy duty 12k CF. End goal is to have a Sunoco style hood to accomodate my engine (and possible other people's needs).Full information in my build thread (figured I'd pop up for some air in these parts). JARblue, Rusty, axmea? and 7 others like this.

04-04-2020, 01:33 PM	#4559 (permalink)
teehee Base Member Join Date: Sep 2018 Location: CA Posts: 117 Drives: 2017 Rep Power: 6	Finished upgrading my brakes Sent from my iPhone using Tapatalk madwi, vtec to vvel, old guy and 4 others like this.

04-04-2020, 05:48 PM	#4560 (permalink)
cubsfan51 Base Member Join Date: Jan 2017 Location: Chicago. IL Age: 72 Posts: 42 Drives: 16 Rdstr TS M6 Blue Rep Power: 6737	It's Spring! Put the summer wheels/tires back on. Michelin PS4s all around Memphis370Z, sx moneypit and old guy like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM