What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

Originally Posted by BettyZ

GPS Head-Up Display Speedometer (quick and easy installation) https://www.amazon.com/dp/B005X4QCAA..._-O7aDb4XD939R

Most responsive for best price on the market. Gets real bright at night so I bough some gray plastic sheets that theatre guys like EW put over the theater spotlights, then cut multiple pieces to fit over the LED display.

I honestly dont know how I drove a car without one of these.

Sent from my SM-G955U using Tapatalk

Originally Posted by Fuzzzy

Had a similar incident in my front yard several years ago. Woman in a SUV crossed the center line, well off the road, went down through a couple rows of trees lining a very old roadbed before taking a sharp turn back toward the road and became stuck between a few trees. Off-duty cop coming the other direction witnessed it and got there shortly before we did. When we got there, she was still hitting the accelerator trying to drive out of it and he was reaching in to kill the ignition. The words of the first responding cop were, "How in the hell did this happen?"

She apparently had had a seizure and was released to her husband who showed up a half-hour later. Cops were totally unconcerned about her continuing to drive subsequently. I sometimes wonder how often I have passed her on the road since then

Originally Posted by ZontheRocks

Tired of my floor mats getting worn and dirty, so I picked up some 3D MAXpider Custom Fit All-Weather Floor Mats

Originally Posted by abm89

That looks very well made. I'll have to look into these whenever i get new seats and clean up the interior.

Originally Posted by Zyonara91

Took the car out yesterday and it started to pour, I'm talking HEAVY rain fall. So, I did some power slides in second gear around some turns. Okay fine, I did like one or two but that's a big thing for me. by the way. TORONTO RAPS ARE THE 2019 NBA CHAMPS!!!! YESSSSSS!!!!!!!!!!!!!!!!!!!

Originally Posted by Ian B

just ordered your hud from amazon, can you post a quick video of it and link us please.

Originally Posted by SPDKING

So last weekend I did the fronts for my brand new Annex Suspension coilovers. Now this weekend I tried to install the rears. Passenger side went smooth as butter, I always make sure to blast all the bolts and nuts a day before to soak so they are easy to take off the next day.

However, the driverside bolt holding the damper will not come loose for anything. I tried a flamethrower, PB blaster multiple times, breaker bar, impact gun, and those sockets used to remove striped nuts and bolts

Here is the end result of my rage and agony

[IMG]
ammonium sulfide equation[/IMG]

Originally Posted by BettyZ

Video will be difficult as car is in garage up on the quickjack for some work.. but I'd be happy to walk you though some things. Two additional items you should buy if you intend to hardwire the device is a a fuse tap, and this: (couldn't figure out the link, paste name into amazon) Pruveeo Hard Wire Kit for Dash Cam, Mini USB Port, 12V to 5V, DC 12V - 30V Car Charger Cable Kit, or something similar to it. If you don't step down the voltage from the fusebox to the HUD, it'll burn it out. I just measured out an acceptable length of wiring from the hardwire kit, snipped it, and spliced.

Let me know if you have questions.

Originally Posted by SPDKING

So last weekend I did the fronts for my brand new Annex Suspension coilovers. Now this weekend I tried to install the rears. Passenger side went smooth as butter, I always make sure to blast all the bolts and nuts a day before to soak so they are easy to take off the next day.

However, the driverside bolt holding the damper will not come loose for anything. I tried a flamethrower, PB blaster multiple times, breaker bar, impact gun, and those sockets used to remove striped nuts and bolts

Here is the end result of my rage and agony

[IMG]
ammonium sulfide equation[/IMG]

Originally Posted by BettyZ

Video will be difficult as car is in garage up on the quickjack for some work.. but I'd be happy to walk you though some things. Two additional items you should buy if you intend to hardwire the device is a a fuse tap, and this: (couldn't figure out the link, paste name into amazon) Pruveeo Hard Wire Kit for Dash Cam, Mini USB Port, 12V to 5V, DC 12V - 30V Car Charger Cable Kit, or something similar to it. If you don't step down the voltage from the fusebox to the HUD, it'll burn it out. I just measured out an acceptable length of wiring from the hardwire kit, snipped it, and spliced.

Let me know if you have questions.

Originally Posted by Ghostvette

https://www.amazon.com/Spy-Tec-Mini-...ateway&sr=8-15



It says for dash cam, but it's bare wire to mini USB.

Originally Posted by BettyZ

This could be a helpful resource, particularly at the end.

https://imgur.com/gallery/ulUQa#5l23tqd

Originally Posted by SPDKING

OMG that is nuts! I did manage to get it off with soaking in PB blaster, smacking it with a rubber mallet, a nut extractor socket and good ole bicep, shoulder and leg strength to get it off. That bolt is screwed though, had to order a new one because I didn't want to run the risk of putting the old one back on just to drive around with my new coilovers. I got rear camber arms and and lockout bolts coming anyways today.