What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)

CRiZO · 01-28-2019, 08:59 PM

Quote:

Originally Posted by JTM88

I don't have one, but here is a video done by someone else. Mine sounded close to this.

Thanks, surprisingly noticeable difference. Did you just have something fab'd up or does CNT make a swappable section?

JTM88 · 01-29-2019, 11:21 AM

Quote:

Originally Posted by CRiZO

Thanks, surprisingly noticeable difference. Did you just have something fab'd up or does CNT make a swappable section?

I had a muffler shop weld in an x-pipe. The difference is really noticable especially in the cabin. To me it didn't have any character, now It sounds great.

The one thing I wans't expecting is how much quieter it made the exhaust.

RN SHARK · 01-27-2019, 04:25 PM

I finished my Coolerworx shifter install and a Sparco qrt-r seat on Buddy Club rails.

madwi · 01-27-2019, 07:00 PM

Quote:

Originally Posted by RN SHARK

I finished my Coolerworx shifter install and a Sparco qrt-r seat on Buddy Club rails.

How long did it take to get the shifter to you? Looks great.

RN SHARK · 01-27-2019, 08:06 PM

Quote:

Originally Posted by madwi

How long did it take to get the shifter to you? Looks great.

Thanks. It only took 2.5 weeks, I believe.

Rusty · 01-27-2019, 08:19 PM

Making progress with this thing.

The splitter is a PIMA.

abm89 · 01-28-2019, 01:01 PM

Quote:

Originally Posted by Rusty

Making progress with this thing.

The splitter is a PIMA.

This looks great! Are you going to go full GT Wing to balance out the car?

Hotrodz · 01-27-2019, 08:36 PM

Looking good!

Sent from my SM-G965U using Tapatalk

Rusty · 01-27-2019, 08:46 PM

Quote:

Originally Posted by Hotrodz

Looking good!

Sent from my SM-G965U using Tapatalk

Hey Bobby, how did they take care of the gap between the bumper and splitter in the very front of the grill on your's? Have any pic's?

Hotrodz · 01-29-2019, 09:18 PM

Quote:

Originally Posted by Rusty

Hey Bobby, how did they take care of the gap between the bumper and splitter in the very front of the grill on your's? Have any pic's?

I left the gap and I used some spacer to help support the bumper. I think the gap helps with air flow as well.

Sent from my SM-G965U using Tapatalk

Rusty · 01-29-2019, 09:20 PM

Quote:

Originally Posted by Hotrodz

I left the gap and I used some spacer to help support the bumper. I think the gap helps with air flow as well.

Sent from my SM-G965U using Tapatalk

That's what I'm doing too.

Hotrodz · 01-29-2019, 09:22 PM

Quote:

Originally Posted by Rusty

That's what I'm doing too.

You can kind of see them if you enlarge the photo.

Sent from my SM-G965U using Tapatalk

abm89 · 01-29-2019, 11:32 AM

It's a custom-made one my friend and I spent time on back in 2015, then we eventually trimmed it back due it being over kill. It was about 4 inches extended from the already lipped Stillen bumper, but now its about 2 and some change inches. It's an aluminum sheet that is cut into more of a "half splitter" (meaning it only goes on the underside of the bumper, not the full under-tray). The rods are connected to the factory crash bar, so while it's not perfect, it is more than safe and not coming off at speed. I plan on getting the honeycomb carbon and cutting out a revised design that will replace the tray and have a service port. The dive planes were more of a joke as I took My friend's daughter's scissors and free-handed the template out of cardboard.

those no longer exist as i totally F-ed them up pulling into the garage one day.

Side profile to show the short length

Side note, I hate installing vinyl. Easily the most frustrating install i've done on the car.

madwi · 02-03-2019, 07:52 PM

Measuring and mounting templates for tracspec vents.

jwick · 02-03-2019, 08:23 PM

Quote:

Originally Posted by madwi

Measuring and mounting templates for tracspec vents.

Won’t those basically be just for show?

01-27-2019, 08:36 PM	#8 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	Looking good! Sent from my SM-G965U using Tapatalk __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

01-29-2019, 11:32 AM	#13 (permalink)
abm89 A True Z Fanatic Join Date: Feb 2013 Location: Austin, Texas Posts: 1,386 Drives: 11 370Z \| 24 EL450 Rep Power: 64764	It's a custom-made one my friend and I spent time on back in 2015, then we eventually trimmed it back due it being over kill. It was about 4 inches extended from the already lipped Stillen bumper, but now its about 2 and some change inches. It's an aluminum sheet that is cut into more of a "half splitter" (meaning it only goes on the underside of the bumper, not the full under-tray). The rods are connected to the factory crash bar, so while it's not perfect, it is more than safe and not coming off at speed. I plan on getting the honeycomb carbon and cutting out a revised design that will replace the tray and have a service port. The dive planes were more of a joke as I took My friend's daughter's scissors and free-handed the template out of cardboard. those no longer exist as i totally F-ed them up pulling into the garage one day. Side profile to show the short length Side note, I hate installing vinyl. Easily the most frustrating install i've done on the car. __________________ Complete Parts List: https://github.com/abm89/ztouge-build Last edited by abm89; 01-29-2019 at 11:35 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[MAZOC] Official "Off-Topic" Discussion Thread	m4a1mustang	MAZOC	6670	09-06-2018 07:21 PM
What did you do with your Z today VI (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10007	06-08-2017 09:48 AM
The New "What did you do with your Z today" (with off topic replies) XVIV	eastwest2300	The Lounge (Off Topic)	10005	09-11-2015 08:57 AM
What did you do with your Z today V (ON TOPIC DISCUSSION ONLY)	AK370Z	Nissan 370Z General Discussions	10148	06-19-2014 08:20 PM
The New "What did you do with your Z today" (with off topic replies) VIII	JARblue	The Lounge (Off Topic)	10016	11-10-2013 11:21 AM

02-03-2019, 07:52 PM	#14 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Measuring and mounting templates for tracspec vents.