My nice new and clean epoxy floor lasted 4 years before giving up the ghost. Between the kick stands on bikes, floor jacks, welding and fabricating. That stuff is hard on the floor. So be careful. ;)

I can see the jack stands may be a problem for the epoxy.

1/4" plywood cut an inch bigger than the base of the jack stand helps. If you have a heavy vehicle. Then 1/2' plywood. Floor jacks are another issue.

Thanks for the tip, I was thinking of doing something like that. I just look at it as inevitable that the floor's going to get jacked up.

re-tinted
https://farm5.staticflickr.com/4454/...d126a32b_b.jpg

Got these getting installed on Wednesday (maybe my SS clutch line too)
https://farm5.staticflickr.com/4363/...3cb6577e_b.jpg

Also, Rusty, I kinda went a different route with my cubby hole. I'll try to get pics tomorrow

It's Sunday, so naturally I took Nismo to church!

http://i67.tinypic.com/8xr8ea.jpg

Like to see what you come up with. :eek:

:rofl2:

:icon17:

It looks like you got there for sunrise services!

Here you go

https://farm5.staticflickr.com/4457/...acd3eef6_b.jpg

https://farm5.staticflickr.com/4466/...6fdd7402_b.jpg

The car is at the paint shop for the next few days having the rear bumper resprayed and having the emblem shaved and filled. $550 for everything. I guess my GF should start side swiping the car more often....

Nitrous command center.

More or less. I couldn't fit the pressure gauge there :(

Finished painting my headlights and handles!!!

http://www.the370z.com/members/fren_...ure98575-a.jpg

Then cleaned the exhaust tips which were way overdue.

http://www.the370z.com/members/fren_...aust-dirty.jpg

http://www.the370z.com/members/fren_...aust-clean.jpg

This is what my garage looks like now. :icon14: My Z has been like that since my surgery.

Where is this glorious brewery?

Sent from my SM-J320V using Tapatalk

Removed the spare tire, carpeted where the spare tire usually goes, and replaced the flimsy plastic piece under the carpet with 1/4" thick polycarbonate.

https://farm5.staticflickr.com/4450/...301dbe6d_b.jpg

Unfortunately the nitrous bottle doesn't clear so I'm going to have to figure out something there

I've always been a fan of the gym bag technique.

Put about 150 miles of canyon driving on the Z in the last 3 days.:happydance: Need to wash the bugs off of her now.

I might cut a hole in the carpet and polycarbonate and let the tip of the bottle poke through

Please share where you went.

I'm still getting use to the look. Had the rear bumper painted and the emblem area filled. It's throwing me off a bit. Still very clean looking now though.

https://farm5.staticflickr.com/4512/...80c995ff_b.jpg

That's why I put a vinyl decal on where the emblem used to be. Still looks clean

That sounds different. Can you show a photo of yours? Best I was thinking was re-adding the 370z emblems back to the left hand side. I feel like it's missing to much now.

I plan to shave the back emblem and replace with a FairladyZ badge right in the middle.

http://www.thezstore.com/store/graph...311127-wmc.jpg


Or go old school with it:

http://www.thezstore.com/store/graph...arge311120.jpg

mine is on the front bumper though so it's not going to be the same.

https://farm5.staticflickr.com/4510/...96e32c06_b.jpg

That's actually not a bad idea. I may go that route, but leave the emblem on the lefthand side still. Just needs something to break up the monotony.

Hmm.... Detail today or work on installing nitrous today...?

Nitrous :happydance:

Okay

I finally had a chance to give her a proper bath and install the ings+ replica lip
https://uploads.tapatalk-cdn.com/201...e28f03ff1c.jpg


Sent from my iPhone using Tapatalk

After my break-in period I changed my oil and switched to Mobil 1 5w-30. I've used it in all my vehicles with great results. My Jeep with a 3.7 V-6 just turned 100k with no issues or leaks.

Looks great, I need to do this! Which product did you use?

Beat a GTR on Sunday. :happydance: I cheated like a mofo. :bowrofl: I don't think he was happy about it.

Win if you can, lose if you must, but always cheat :tup:

Drove 400 miles and back with 6 hours of nap over 48 hour trip to swap bumpers

https://uploads.tapatalk-cdn.com/201...ff76ed67db.jpg


Sent from my iPhone using Tapatalk

I went old school. Check out my pics in my albulm. I get tons of compliments on it.
You'll have to shave the nubs off the back of the badge and bend it to fit our bumper. Z1 sells them for about $50

I was leaning that way - looks great. Think I am pretty sold on it now.

Pic from bthomas's album (for anyone too lazy to look):
http://www.the370z.com/members/bthom...ape-adhere.jpg

Took a trip to Atlantic City and decided to take a picture while on the top of the garage building. I really like this shot