Originally Posted by ChopsZ (Post 3681769)

Thanks!

So far, I've ordered everything from Crutchfield. These run $40, and after just installing them and making tweaks to the system... MAJOR IMPROVEMENT! And they'll only get better with a little break-in and more tweaking. I actually plan on running the calibration mic this weekend and running the auto time alignment and auto tune, though I'm going to document my current "tuned by ear" settings, because it already sounds pretty darn good.

I have these crossed over at 1.25 kHz at 12 dB (was at 8 kHz with the stockers - yuck). I now have the door speakers crossed over at 1.25 kHz at 24 dB on the top end and still 40 Hz at 24 dB on the bottom end. I ran the system for a solid hour with all of the tweaking and listening.

As for fitment, they fit perfectly though the mounting holes don't line up perfectly. Once you get one screw in, the other is slightly past, so you can't put that screw in. I'll do one of two things this weekend. Either leave them as is and put the two other screws in on the sides with small fender washers, OR I'll try seeing if the included panel clips and screws that came with the speakers works better with proper alignment.

Now a few pics...

http://charlest.zenfolio.com/img/s/v...49086944-5.jpg

http://charlest.zenfolio.com/img/s/v...49086946-5.jpg

http://charlest.zenfolio.com/img/s/v...49086945-5.jpg

http://charlest.zenfolio.com/img/s/v...49086948-5.jpg

Originally Posted by Silly Rabbit (Post 3700197)

Added a Next Level Performance carbon splitter. Its nice when a local friend changes things up and gives you a good deal on parts.

Originally Posted by DeliriousClam (Post 3699237)

Took a trip to Atlantic City and decided to take a picture while on the top of the garage building. I really like this shot

Originally Posted by OTW Z-Boy (Post 3700218)

In for a couple more pics please. What's was the install like and what are your thought on fitment? Any crazy gaps?

Looks niZe.


Sent from my iPad using Tapatalk

Originally Posted by DeliriousClam (Post 3700366)

CSC is about to bite the ghost. This sucks

Originally Posted by Hotrodz (Post 3700369)

You may want to reconsider the spitter rods depending on how much your splitter sticks out in front of your front bumper and how much your car is lowered but if you are driving at a high rate of speed and have to brake your nose is going to dive and the down force from the splitter will dive it into the pavement. Take it from me as I lost my last splitter because of that!

Sent from my SM-N910P using Tapatalk

Originally Posted by Rusty (Post 3700379)

How much splitter do you have sticking out?

Originally Posted by Kzonts (Post 3700368)

I have the ZSpeed CMAK and it's been rock solid.

Originally Posted by JTM88 (Post 3700385)

I did an oil change, installed a ZSpeed under shroud to replace the torn up plastic one, and installed some O2 spacers that have catalytic mesh in them so I can pass emissions.

Originally Posted by Rusty (Post 3700387)

You need to do this for the under tray. :D

http://www.the370z.com/exterior-inte...nder-tray.html

Originally Posted by Rusty (Post 3700387)

You need to do this for the under tray. :D

http://www.the370z.com/exterior-inte...nder-tray.html

Originally Posted by DeliriousClam (Post 3700516)

My undertray came with that... Is that strange?

Originally Posted by Rusty (Post 3700590)

When did you buy your tray?

Originally Posted by DeliriousClam (Post 3700635)

like a year and a half ago

Originally Posted by Rusty (Post 3700679)

I bought mine in 2013. So I'm wonder if they decided to include that after my thread came out. Anyone else who bought the under tray get the rivet nuts too?

Originally Posted by Rusty (Post 3700679)

I bought mine in 2013. So I'm wonder if they decided to include that after my thread came out. Anyone else who bought the under tray get the rivet nuts too?

Originally Posted by DeliriousClam (Post 3700708)

I got one of their first under trays for the 2015 nismo conversion (before they even listed it on their site) so I don't know if ..........I'm a special case.......... or not

Originally Posted by Rusty (Post 3700709)

You said it, not me. :rofl2:

Originally Posted by DeliriousClam (Post 3700714)

Everyone knows I'm a head case not sure about the zspeed under tray though

Originally Posted by Rusty (Post 3700715)

Got to take cheap shots when I can. :rofl2: ;)

Originally Posted by DeliriousClam (Post 3700718)

It's not a cheap shot when it's something obvious and that everyone knows ;)

Originally Posted by Rusty (Post 3700722)

:rofl2:

Originally Posted by DeliriousClam (Post 3700724)

I mean Jesus look my location is Greystone :icon17:

Originally Posted by Rusty (Post 3700742)

From Urban Dictionary.

Greystone;
A lavish neighborhood located in Hoover, Alabama. Only the wealthiest people live in Greystone. Greystone Contains many million dollar homes, reserved for wealthy families. Greystone is zoned for Hoover City Schools, which contains some of the best schools in the state of Alabama. Famous NFL, NBA, and MLS players live in Greystone. Preppy rich girls live in Greystone, who think they are better than everyone else. They act like bitches, but they are hot.

Originally Posted by Silly Rabbit (Post 3701617)

Quick cruise over to Grissom Airbase Museum.

Originally Posted by Silly Rabbit (Post 3701617)

Quick cruise over to Grissom Airbase Museum.

Originally Posted by DeliriousClam (Post 3701670)

Grissom? Command pilot from Apollo 1?

Originally Posted by Silly Rabbit (Post 3701682)

That is the one. The base is named in memory of astronaut and Indiana native Virgil I. "Gus" Grissom, who, along with fellow astronauts Ed White and Roger Chaffee, perished in the Apollo 1 fire at Cape Canaveral Air Force Station Launch Complex 34 in 1967.

Originally Posted by ZeroZ34 (Post 3701620)

Nothing :'( it's been three weeks since I've moved her