Missing under piece to bumper/front lip?

hazzazi · 01-19-2012, 08:22 AM

Quote:

Originally Posted by Rooskey

According to the diagram has anyone lost part 75895 while driving at high speeds? Mine flew off and took out one of my 02 sensors a few months back. I was running about 140mph when I heard a loud noise from underneath. I never heard of this before on the forums so im hoping this was a rare occasion.

same thing happened to me, was also going around the same speed...

Nismo63 · 03-26-2012, 09:19 AM

I had a problem with that part this weekend after I took the Z in for an Oil Change. The next day I was driving home from the store and heard this noise from under the car. I got out and it was hanging loose and hitting the ground. I got under the car and took it off before it came off on its own. Don't know if its worth putting back on or not? LOL

Nismo63 · 03-26-2012, 09:21 AM

Quote:

Originally Posted by Rooskey

According to the diagram has anyone lost part 75895 while driving at high speeds? Mine flew off and took out one of my 02 sensors a few months back. I was running about 140mph when I heard a loud noise from underneath. I never heard of this before on the forums so im hoping this was a rare occasion.

I had a problem with that part this weekend after I took the Z in for an Oil Change. The next day I was driving home from the store and heard this noise from under the car. I got out and it was hanging loose and hitting the ground. I got under the car and took it off before it came off on its own. Don't know if its worth putting back on or not? LOL

USMCram · 01-19-2012, 07:39 AM

I'm interested in this aluminum cover....

Why is the Nismo one so expensive? It's just a piece of plastic.

quicksilverCC · 01-19-2012, 08:48 AM

Quote:

Originally Posted by USMCram

I'm interested in this aluminum cover....

Why is the Nismo one so expensive? It's just a piece of plastic.

Yea my thoughts exactly too....I guess because it's "special"

theDreamer · 01-19-2012, 09:36 AM

Quote:

Originally Posted by USMCram

I'm interested in this aluminum cover....

Why is the Nismo one so expensive? It's just a piece of plastic.

It is an insurance/exclusive thing.
They can make money from insurance companies with this piece since anytime the front is hit this will be replaced, and also it stops people from just buying the Nismo parts and building the kit themselves (which honestly has not stopped anyone).

Joe@ZSpeed · 01-20-2012, 08:51 AM

I think the bigger reason is the cost to make a small number of parts, You have to figure this is a very low QTY part for nissan being it is only used on the Nismo version. Imagine the cost of a plastic mold that size. The piece is huge!
I priced a mold for a small piece of plastic I wanted to "re-pop" a while back and the cost was well over $20,000 for a few inches of mold.

FuszNissan · 01-20-2012, 11:18 AM

[QUOTE=Joe@ZSpeed;1500261]I think the bigger reason is the cost to make a small number of parts, You have to figure this is a very low QTY part for nissan being it is only used on the Nismo version.
+1

quicksilverCC · 02-02-2012, 12:50 PM

any news on the crafting of this undertray?

Joe@ZSpeed · 02-02-2012, 02:19 PM

Test fitting prototype Saturday in Cleveland...

quicksilverCC · 02-03-2012, 08:18 AM

Nice let me know what you guys come up with!

Joe@ZSpeed · 02-04-2012, 07:57 PM

For those anxiously awaiting the teaser pics...

Chris was kind enough to allow us to use his car for test fitting today so we made the 4 1/2 hour trip to Cleveland today and took him up on it. Thanks Chris!

Should not be long guys, Prototype fit amazingly well with just a few minor details to work out.

ZSpeed Performance 370z Nismo Aluminum Engine Underpan prototype.

theDreamer · 02-04-2012, 08:39 PM

Looking good.
Any estimated price yet?

Joe@ZSpeed · 02-04-2012, 08:42 PM

Quote:

Originally Posted by theDreamer

Looking good.
Any estimated price yet?

Sorry, no pricing yet. Should have plans finalized this week

hazzazi · 02-04-2012, 10:22 PM

Quote:

Originally Posted by Joe@ZSpeed

For those anxiously awaiting the teaser pics...

Chris was kind enough to allow us to use his car for test fitting today so we made the 4 1/2 hour trip to Cleveland today and took him up on it. Thanks Chris!

Should not be long guys, Prototype fit amazingly well with just a few minor details to work out.

ZSpeed Performance 370z Nismo Aluminum Engine Underpan prototype.

this is looking good, I'd be interested in one...good luck on getting it finalized .

Sent from my Galaxy Nexus using Tapatalk

03-26-2012, 09:19 AM	#2 (permalink)
Nismo63 Base Member Join Date: Sep 2011 Location: Fort Lauderdale, FL Posts: 65 Drives: 2010 370Z Nismo # 63 Rep Power: 15	I had a problem with that part this weekend after I took the Z in for an Oil Change. The next day I was driving home from the store and heard this noise from under the car. I got out and it was hanging loose and hitting the ground. I got under the car and took it off before it came off on its own. Don't know if its worth putting back on or not? LOL __________________ 2010 - 370Z Nismo #0063 - Injen CAI, Ark Grip True Dual Exhaust, H&R Sports Springs, Sony 770BT - Rockford Fosgate Sub & Amp. - Nismo Shift Knob - LED bulb upgrade - 370Z Nismo owners? Come Visit my pages http://www.facebook.com/groups/232194736829502/ https://www.facebook.com/pages/Proje...7010574?ref=hl

01-20-2012, 11:18 AM	#8 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 544	[QUOTE=Joe@ZSpeed;1500261]I think the bigger reason is the cost to make a small number of parts, You have to figure this is a very low QTY part for nissan being it is only used on the Nismo version. +1 __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

02-04-2012, 08:39 PM	#13 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4212	Looking good. Any estimated price yet? __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need help with missing/broken body piece	Pharmacist	Exterior & Interior	14	10-30-2011 09:51 AM
[FOR SALE] Evo-R CF Diffuser & Front Upper Bumper Piece	AllForTheCash	Parts for sale (Private Classifieds)	11	05-24-2011 03:59 PM
Anyone ever get stopped for missing front plate?	darrinps	Nissan 370Z General Discussions	48	07-01-2010 03:02 PM
Missing front spoiler	Lemers	Exterior & Interior	13	04-01-2010 11:26 PM

01-19-2012, 07:39 AM	#4 (permalink)
USMCram Track Member Join Date: Oct 2011 Location: Texas Posts: 522 Drives: 2019 718 Cayman Rep Power: 3371	I'm interested in this aluminum cover.... Why is the Nismo one so expensive? It's just a piece of plastic.

01-20-2012, 08:51 AM	#7 (permalink)
Joe@ZSpeed A True Z Fanatic Join Date: Mar 2011 Location: Ohio Posts: 1,304 Drives: Nissan Rep Power: 343001	I think the bigger reason is the cost to make a small number of parts, You have to figure this is a very low QTY part for nissan being it is only used on the Nismo version. Imagine the cost of a plastic mold that size. The piece is huge! I priced a mold for a small piece of plastic I wanted to "re-pop" a while back and the cost was well over $20,000 for a few inches of mold.

02-02-2012, 12:50 PM	#9 (permalink)
quicksilverCC Base Member Join Date: Nov 2011 Location: Pennsylvania Posts: 42 Drives: 370Z Nismo Rep Power: 15	any news on the crafting of this undertray?

02-02-2012, 02:19 PM	#10 (permalink)
Joe@ZSpeed A True Z Fanatic Join Date: Mar 2011 Location: Ohio Posts: 1,304 Drives: Nissan Rep Power: 343001	Test fitting prototype Saturday in Cleveland...

02-03-2012, 08:18 AM	#11 (permalink)
quicksilverCC Base Member Join Date: Nov 2011 Location: Pennsylvania Posts: 42 Drives: 370Z Nismo Rep Power: 15	Nice let me know what you guys come up with!

02-04-2012, 07:57 PM	#12 (permalink)
Joe@ZSpeed A True Z Fanatic Join Date: Mar 2011 Location: Ohio Posts: 1,304 Drives: Nissan Rep Power: 343001	For those anxiously awaiting the teaser pics... Chris was kind enough to allow us to use his car for test fitting today so we made the 4 1/2 hour trip to Cleveland today and took him up on it. Thanks Chris! Should not be long guys, Prototype fit amazingly well with just a few minor details to work out. ZSpeed Performance 370z Nismo Aluminum Engine Underpan prototype.