Tractionless

Sold some shocks to Tractionless. Nice, easy guy to deal with. Thanks!

I highly recommend NOT using Getyourwheels.com

I had a problem with my Forgestar F14's clear coat failing within 4 months and 1,500 miles of ownership in a state that doesn't see freeze/thaw nor use road salt.

Get your wheels receives them as blanks from Forgestar and then finishes to your liking. Who ever they are using for coating is subpar!

They tried blaming my installer but when I told them i went to a high end shop that deals with all kinds of wheels in sizes up to 30" and showed pics of the machines they backed off. Then they admitted the coater was having problems with the clear that was used on my wheels.

They told me I had to cover dismount, shipping both ways and re-mounting costs to have them recoated.

Upon receiving them back the water that got below the clear damaged the metal permanently. So although recoated the damage can always be seen underneath. They did not tell me that prior to shipping back.

When approaching them about it they offered me a $50 refund on a $2100 set of wheels.

RUN from Getyourwheels.com!!!!

Thanks for an easy transaction. Super transparent and communicative buyer! Buy/sell with confidence.

excellent seller everything worked out great thanks

10/10 would recommend Tractionless as a seller. I recently bought some used wheels from him and he shipped them out the next day. They arrived exactly as described and they were packaged very well! Thanks again

"Tractionless is one of the nicest person I have ever dealt with. I would definitely
do another transaction with him in the future."

I second that, a pleasure to do business with!!

Tractionless is one of the nicest person I have ever dealt with. I would definitely
do another transaction with him in the future.

If ECUTek would get off their butt about updating the PID's we could see it on our ECUTek screen via gauge or datalogging. Supposedly been in the works for years. For now I scan the trans pan...

http://www.the370z.com/engine-drivetrain/122560-7at-stalls-whenever-i-put-drive-reverse.html

I think part of the problem was the angle my drill was out due to working room. It was starting to cut into the center metal bolt hole. :icon14: No I heeded the advice to drill the bushing before...

I HIGHLY recommend high carbon blanks. Raybestos 980663 on ebay $87 for the pair!! I believe I used centric on the front but don't have the PN at the moment. Inexpensive, stand up better to heat...

Ignition coils that test fine static off the car can still be bad when put under load during normal operation. You may never see it test "bad" on a multimeter.

Seat Skins Installed! http://www.the370z.com/exterior-interior/135470-guinea-pig-report-ridies-seat-skins-installed.html#post3982080

I think part of the problem was the angle my drill was out due to working room. It was starting to cut into the center metal bolt hole. :icon14: No I heeded the advice to drill the bushing before...

I want orange when you get stock please. Email me an Paypal invoice please Tractionless@comcast.net

Ported 350 upper, ported 370 lower and HFC's installed over the weekend. Should provide a nice surge of power!

Ok so removal complete and Whiteline bushing in. 1. Used the 2" hole saw but started running into the center boss of the OE bushing. I was probably on an angle due to the size of my drill. ...

Ok so removal complete and Whiteline bushing in. 1. Used the 2" hole saw but started running into the center boss of the OE bushing. I was probably on an angle due to the size of my drill. ...

Seat Skins Installed! http://www.the370z.com/exterior-interior/135470-guinea-pig-report-ridies-seat-skins-installed.html#post3982080

Trans coolers can be DIY built very easily for $60. In fact most vendors do just that and charge you 3X+ for convenience. I used the EXACT Hayden unit Z1 supplies in their kit. The pan gasket...

Seat Skins Installed! http://www.the370z.com/exterior-interior/135470-guinea-pig-report-ridies-seat-skins-installed.html#post3982080

Ya can get a 997 Porsche TT for less than that which will actually appreciate! :eek: