Differential Bush removal options

Tractionless

I think part of the problem was the angle my drill was out due to working room. It was starting to cut into the center metal bolt hole.

No I heeded the advice to drill the bushing before doing any hole sawing. I put rags over the area as well.

Interestingly enough fluid came out of both sections even though I had dried and burnt fluid on the driver side exhaust. No huge staining down the cover like pictures I'd seen though. Even through I have a cover brace the whiteline's further solidified upshift and downshift action so it was worth all the effort.

__________________
Toys Not Tots