TBatt

TBatt Wrote :
Last night I found the problem. A connector was not fully seated on the transmission harness that has the hookups for the O2 sensors. There is a single wire connector that goes up near the starter motor that was not seated all of the way. When it was fixed the car started up.
--------------------
Sorry to bug you 6 years after you posted this - but i have having the same trouble (No recent work done to the car)
I checked the switch with an ohm meter and checked the fuse and the only relay i could find in the IPDM.

The wire you referred to .... where did it come from / Go to?
Thanks Tons for any help you could offer.
Dylan

PM’d you !

Crazy enough I'm in Huntsville and have been looking for a new (to me) car. I had test drove a Nismo up at Jerry Damson but it sold before I got the go ahead from my wife. I was wondering if you where available next week to meet up so that I can check out the 370. I'm Montgomery this weekend but will be back in Huntsville on Monday.

-Edward

Sorry for the slow response but I've been crazy busy at work.

Send via PayPal. My account is tbatt@knology.net

Sounds good where do I send the payment and shipping info too?

The complete kit, with shipping in the US is $175.

Hi ,
How much do you charge for your stillen idler pulley and hd belt upgrade ?

Yes, but i don't have them with me at the moment, they are at my office.

Nice car- Roll Tide ('15)!

Can you share your offsets?

It could be the sending unit for your oil pressure gauge. If the idiot light hasn't come on but the pressure is reading that low that could be the problem. The light has it's own sending unit. I...

Seb will have a base tune that will get you close and after a couple of logs he will have it dailed in and have you grinning from ear to ear. He is VERY responsive and will get you going very quick....

A couple of weeks ago I installed an AEM Boost/AFR gauge that has data logging capability. It obviously already has the boost pressure and air fuel ratio information but what was missing was the...

It could be the sending unit for your oil pressure gauge. If the idiot light hasn't come on but the pressure is reading that low that could be the problem. The light has it's own sending unit. I...

Having gone from a MT6 Z to a GT-R, you guys that do this are in for some fun. Driving a DCT with paddle shifters is the ultimate video game! Waaap, BANG, waaap, BANG, waaap..........:excited:

I have found a good storage solution for the pump, rubber blocks and hoses. It's the Stanley STST33031 tool storage cart. It has wheels and a collapsible handle to easily move it around. It is...

I have found a good storage solution for the pump, rubber blocks and hoses. It's the Stanley STST33031 tool storage cart. It has wheels and a collapsible handle to easily move it around. It is...

I have found a good storage solution for the pump, rubber blocks and hoses. It's the Stanley STST33031 tool storage cart. It has wheels and a collapsible handle to easily move it around. It is...

I have found a good storage solution for the pump, rubber blocks and hoses. It's the Stanley STST33031 tool storage cart. It has wheels and a collapsible handle to easily move it around. It is...

I have found a good storage solution for the pump, rubber blocks and hoses. It's the Stanley STST33031 tool storage cart. It has wheels and a collapsible handle to easily move it around. It is...

The Stillen tech said that the new cable design was done late 2016 so if you have a kit before then it could have the extension cable problem. My code 1239 was VERY intermittent. I could drive for...

Purchased these parts to build a boost system mod for my supercharged 370. I have since sold the car and no longer need all of these parts. Included are top quality boost style clamps, silicone...

After a while, the bolts that hold the front underpan on and the access panel for changing the oil wear out. I found these replacements but never used them. New in the bag(s). $15 including...

Congrats! Keep us posted on the rest of the project, please. I would like to know how the power delivery works out on the track. SC is very predictable but a turbo car can be a handful when the...

Congrats! Keep us posted on the rest of the project, please. I would like to know how the power delivery works out on the track. SC is very predictable but a turbo car can be a handful when the...