Rangerz

Thanks,

Got a good presure gauge, pyrometer is a good idea to along with a log book like you said. Your starting them out about 4 psi lower than i have been.

Thanks for the info i will give it a shot next weekend.

Hey Man,
I like them about 36-38 hot. Depending on the track I'll normally start around 31-32psi cold and go from there. I normally run the rear 1-2psi lower than the front as well.

Alignment, driver, and the specific track definitely plays into it. Best advice anyone ever gave me was to buy a good pressure gauge (with a build-in bleed valve), and a pyrometer. For the first one or two runs, I normally pit just before the sessions closes, and take/record all my temps. This is the only way to get an accurate reading. Then for the later sessions, I run the cooldown lap, which lets me get a good idea of how much heat I'm losing during cooldown, for future reference.

Well get some track video then. Have fun with it

Well Tony didn't want me to take any pic which is understandable. Im sure you are getting the updates but, to see it out of the car with the plumbing pretty much complete in person is pretty impressive. Everything is just so clean, the craftsmanship and attention to detail really show.

Thanks man. I wish I could afford the time to drive it back! Unfortunately I'm slammed at work right now so it will be riding back in a transport. It traveled out to CA in good company. Brand new gt3-rs, two stock cars, and a super clean galaxy 500. The driver had to pull some of them off to put mine in the front. Very cool gathering in my driveway

I haven't really narrow it down to which side, but it was very clear from the wing section

Hey RangerZ. I'm wondering if you can show me a pic of the process. I'm not very sure on where I suppose to use the trick. Thanks a lot!

Still waiting. I actually called yesterday and asked to go from 18 to 12 inch res. Thry should be building it this week or next. I never got to talk to Tony, sent a email as asked so we shall see.

Hey man so how are you liking your exhaust?? Have you gotten it yet?

there is already a thread on it in the Forced induction section http://www.the370z.com/forced-induction/90813-csf-triple-pass-radiator.html but i thought id bring it up here where people...

Got my Z a little over a week ago just in time for a track event I was instructing at. So turned out I had a great opportunity to test it out before doing some other big track events I am planning...

I knew you would ask .. hehe they are replacement for the Maxima 09+ which is 75mm. I made a reducer/adaptor because they don't share the same bolts pattern. Hopefully I can have some dyno time...

the ones that came with the wing are 1/8'' in aluminium, he has now upgraded to CF end plates now. on another topic, I received those goodies ! ;) 305 slicks with 18''x11'' rims. ...

Op there is a lot of good information that has been presented and should be considerd here. I just want to add my two cents in that you really can't compare the two kits againts each other other than...

Timing is about right. My z is almost ready performance wise too ;) Sent from my SGH-M919 using Tapatalk

Awesome!

Cleanest look possible! Congratulations on making this look sooo good! :yum:

Hey guys (and girls? :)) Thought I would pop in here with a bit of an update. I put the kit through a bit of a torture test this weekend at Road Atlanta with Global Time Attack. Two days of...

The car sounds awesome man! Ill also be joining you in a few months my friend.

If not a part of your "standard assortment of tools", I'd suggest adding a few fuses to the list.

I finally got all of my new mods on the car a couple of weeks ago and got it Uprev tuned at Advanced Race Technology in Sarasota, FL. New Mods: -Takeda cold air intakes -Motordyne ART pipes...

This shifter isn't bad... It's terrible. I'd rather weld a dildo to the transmission and shift with that...

Disregard Mozen... I found your SSK comparison. Why is it that everyone else isn't happy with the product ?

All this information may have been relevant and helpful several weeks ago. eBay it is!