GaleForce's build

jwick · 04-01-2014, 09:24 PM

Grabbed a quick pic from my cell but battery was dying so no flash. Let me know if you want me to send something better.

Looks like its a equal leg angle 3.75"x3.75" and is 2" wide with six holes drill, two to mount the GReddy plate and four to bolt into the frame in roughly same location as the standard one that comes with the kit.

jwick · 04-02-2014, 09:37 PM

Pretty sure the GReddy side attachment bolts are M8's but they could be M10's. I know they aren't M6's cuz I have a bunch of those laying around since I replaced all the undershroud bolts. Again if I can make it to a hardware store to check bolt sizes before install I'll confirm but at least I narrowed it down for you.

GaleForce · 04-02-2014, 09:45 PM

Quote:

Originally Posted by jwick

Pretty sure the GReddy side attachment bolts are M8's but they could be M10's. I know they aren't M6's cuz I have a bunch of those laying around since I replaced all the undershroud bolts. Again if I can make it to a hardware store to check bolt sizes before install I'll confirm but at least I narrowed it down for you.

Don't make a special trip, I'll check it out as soon as I get some time to myself in the garage.

jwick · 04-02-2014, 10:23 PM

Quote:

Originally Posted by GaleForce

Don't make a special trip, I'll check it out as soon as I get some time to myself in the garage.

Not like a special trip to the hardware store ever scared me

jwick · 04-02-2014, 09:48 PM

Oh and not sure when you plan to install the new thermostat plate but I'll have mine in next weekend. I'll definitely send you some pictures and any advise I have to share on location.

O&G · 04-02-2014, 10:27 PM

Jwick is the man, he made a trip for me!

jwick · 04-02-2014, 10:37 PM

Quote:

Originally Posted by O&G

Jwick is the man, he made a trip for me!

We are all brothas from anotha motha. Gotta keep my modding borthas on the road...

jlo370z · 04-07-2014, 07:12 PM

Quote:

Originally Posted by O&G

Jwick is the man, he made a trip for me!

ditto, he made my world all red

jwick · 04-07-2014, 08:12 PM

Quote:

Originally Posted by jlo370z

ditto, he made my world all red

And you kept my theme blue. Win win!

wheee! · 04-03-2014, 08:33 AM

best forum, best people, best cars!!!

GaleForce · 04-04-2014, 04:15 PM

Thanks Sasha.

GaleForce · 04-07-2014, 05:30 PM

This just arrived, CJM fuel gauge adaptor,

Luciano13 · 04-07-2014, 07:09 PM

I wish i had a purpose for this on my Z

GaleForce · 04-07-2014, 08:02 PM

Installed the CJM fuel gauge adaptor. Quick and easy. There is one small issue, there is a bracket that needs to be modified or removed. Follow along with the pics to see what I mean.

This is the offending piece of bracket. You can cut or grind this tab off, or remove it.

I chose to remove it. But now the MAF sensor wire is sticking out like a sore thumb.

No problem, unplugged and rerouted. Nice and clean now.

All done,

Works,

Boosted Performance · 04-07-2014, 08:12 PM

What is all that dust doing in the engine bay? It must be cleaned before picture time...

My is the same way....just put insurance on it today, first stop car wash. Engine/tire cleaner FTW.

04-01-2014, 09:24 PM	#1 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465058	Grabbed a quick pic from my cell but battery was dying so no flash. Let me know if you want me to send something better. Looks like its a equal leg angle 3.75"x3.75" and is 2" wide with six holes drill, two to mount the GReddy plate and four to bolt into the frame in roughly same location as the standard one that comes with the kit. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-02-2014, 09:37 PM	#2 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465058	Pretty sure the GReddy side attachment bolts are M8's but they could be M10's. I know they aren't M6's cuz I have a bunch of those laying around since I replaced all the undershroud bolts. Again if I can make it to a hardware store to check bolt sizes before install I'll confirm but at least I narrowed it down for you. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-02-2014, 09:48 PM	#5 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465058	Oh and not sure when you plan to install the new thermostat plate but I'll have mine in next weekend. I'll definitely send you some pictures and any advise I have to share on location. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

04-02-2014, 10:27 PM	#6 (permalink)
O&G A True Z Fanatic Join Date: Nov 2010 Location: Lone Star State Age: 43 Posts: 1,212 Drives: 40th Anv. Rep Power: 24	Jwick is the man, he made a trip for me! __________________ O&G's Build/Journal <---(1st lowmount single turbo treeseventy) Built Engine Thread 2011 F-250 Build/Journal

04-03-2014, 08:33 AM	#10 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 59 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40183	best forum, best people, best cars!!! __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

04-04-2014, 04:15 PM	#11 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51866	Thanks Sasha. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

04-07-2014, 05:30 PM	#12 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51866	This just arrived, CJM fuel gauge adaptor, __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

04-07-2014, 07:09 PM	#13 (permalink)
Luciano13 A True Z Fanatic Join Date: Mar 2013 Location: Canada Posts: 2,130 Drives: 2016 Solid Redz Rep Power: 247	I wish i had a purpose for this on my Z __________________ http://www.the370z.com/members-370z-...lid-red-z.html

04-07-2014, 08:02 PM	#14 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51866	Installed the CJM fuel gauge adaptor. Quick and easy. There is one small issue, there is a bracket that needs to be modified or removed. Follow along with the pics to see what I mean. This is the offending piece of bracket. You can cut or grind this tab off, or remove it. I chose to remove it. But now the MAF sensor wire is sticking out like a sore thumb. No problem, unplugged and rerouted. Nice and clean now. All done, Works, __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

04-07-2014, 08:12 PM	#15 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3384	What is all that dust doing in the engine bay? It must be cleaned before picture time... My is the same way....just put insurance on it today, first stop car wash. Engine/tire cleaner FTW. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Z Build	pwrhsms	Member's 370Z Gallery	43	09-09-2013 11:35 AM
Possible Nos build	triadz	Forced Induction	7	04-06-2012 10:30 AM
TT build in Fl	travnflorida	Nissan 370Z General Discussions	3	08-15-2011 05:51 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 05:24 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM