GaleForce's build

Unique_Z · 12-12-2012, 03:14 AM

Evcs

nice stuffs you got there man

Anyway, do you by any chance can replicate the single pod but fabricating it by following the right side's A pillar? I'm interested on those pod but my Z is a RHD..

GaleForce · 12-12-2012, 08:27 AM

Quote:

Originally Posted by Iwan72

Evcs

nice stuffs you got there man

Anyway, do you by any chance can replicate the single pod but fabricating it by following the right side's A pillar? I'm interested on those pod but my Z is a RHD..

Thanks!

I started reading through the manual for the EVC-s and noticed it's similar to setting up the PID systems I learned about while in college... Ugh...

I'm not sure about the connection between the surge tank and the fuel regulator, other than that, the installation looks straight forward.

RHD cars...
Yes, building a pod for the right side A-pillar is something that can be done. Wait till you see what I have in store for my A-pillar. I think you'll like it.

Mr&Mrs · 12-12-2012, 09:00 AM

LOL! at the basket!

Sweet updates! I need a 3 pod pillar. Any plans to do more?

GaleForce · 12-12-2012, 09:23 AM

Quote:

Originally Posted by Mr&Mrs

LOL! at the basket!

Sweet updates! I need a 3 pod pillar. Any plans to do more?

I can/will do them by request. Keep in mind, this is not a cheap option. They are one-off pieces built to order, whatever you want done can be done as long as if there is the physical space to do it.

If cost is a factor, a cheaper (and still nice) option would invovle using universal gauge pods and mould them to the a-pillar.

Mr&Mrs · 12-12-2012, 11:47 AM

The ones I have now Dave put in and are super clean. Yet they still do not look like a factory item. If I get time I will try and take a picture tonight.

Quote:

Originally Posted by GaleForce

I can/will do them by request. Keep in mind, this is not a cheap option. They are one-off pieces built to order, whatever you want done can be done as long as if there is the physical space to do it.

If cost is a factor, a cheaper (and still nice) option would invovle using universal gauge pods and mould them to the a-pillar.

GaleForce · 12-12-2012, 11:51 AM

Quote:

Originally Posted by Mr&Mrs

The ones I have now Dave put in and are super clean. Yet they still do not look like a factory item. If I get time I will try and take a picture tonight.

Cool, I would like to see how it turned out.

The part I ordered from Nissan is to make my pod look more factory. I should have thought about it before I started doing the work, now I have to "undo" some of it. Oh, well. It's going to look great once it's done.

Nut_N_Much · 12-12-2012, 05:17 PM

Nice, the mesh looks perfect.. EVC-S

wheee! · 12-12-2012, 09:08 AM

hmmmmm, Mrs. Force might be a little peeved....

GaleForce · 12-12-2012, 09:24 AM

Quote:

Originally Posted by wheee!

hmmmmm, Mrs. Force might be a little peeved....

Maybe... But I did do laundry. That should even things out.

blackcherry20 · 12-12-2012, 07:56 PM

Quote:

Originally Posted by wheee!

hmmmmm, Mrs. Force might be a little peeved....

lol!! Pretty cool mod though-your new nickname: mcguyver(?)! Lol

wheee! · 12-12-2012, 10:19 PM

Quote:

Originally Posted by blackcherry20

lol!! Pretty cool mod though-your new nickname: mcguyver(?)! Lol

Only if the mesh is held in with duct tape!

GaleForce · 12-12-2012, 11:03 PM

Quote:

Originally Posted by blackcherry20

lol!! Pretty cool mod though-your new nickname: mcguyver(?)! Lol

Quote:

Originally Posted by wheee!

Only if the mesh is held in with duct tape!

no duct tape

wheee! · 12-13-2012, 07:11 AM

no MacGyver....

GaleForce · 12-14-2012, 08:27 AM

Had a productive couple of hours out in the garage. Shaved the carbon fangs to fit with the Mine's lip, and test fit the moustache.

Bumper mods 1 by J M Gale, on Flickr

Bumper mods 2 by J M Gale, on Flickr

Bumper mods 3 by J M Gale, on Flickr

It was a little nerve wracking trimming the fangs, but it turned out well.

Also found a guy 30 minutes away that will be able to rework my Berk CBE so it mates up with the Boosted Perfomance turbo kit

Happy, happy, happy!

wheee! · 12-14-2012, 11:21 AM

Looking Good! Can't wait to see the finished front end!

12-12-2012, 03:14 AM	#1 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 19	Evcs nice stuffs you got there man Anyway, do you by any chance can replicate the single pod but fabricating it by following the right side's A pillar? I'm interested on those pod but my Z is a RHD.. __________________ My Z Build UniqueZ

12-12-2012, 09:00 AM	#3 (permalink)
Mr&Mrs A True Z Fanatic Join Date: May 2010 Location: Tampa Posts: 4,207 Drives: RZ34 Rep Power: 31942	LOL! at the basket! Sweet updates! I need a 3 pod pillar. Any plans to do more? GaleForce likes this. __________________ Project Z <--Click - Check out the link too many mods to list!

12-12-2012, 05:17 PM	#7 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 28	Nice, the mesh looks perfect.. EVC-S GaleForce likes this. __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html

12-12-2012, 09:08 AM	#8 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 59 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40183	hmmmmm, Mrs. Force might be a little peeved.... GaleForce and Nut_N_Much like this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

12-13-2012, 07:11 AM	#13 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 59 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40183	no MacGyver.... blackcherry20 likes this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

12-14-2012, 08:27 AM	#14 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51866	Shaved carbon Had a productive couple of hours out in the garage. Shaved the carbon fangs to fit with the Mine's lip, and test fit the moustache. Bumper mods 1 by J M Gale, on Flickr Bumper mods 2 by J M Gale, on Flickr Bumper mods 3 by J M Gale, on Flickr It was a little nerve wracking trimming the fangs, but it turned out well. Also found a guy 30 minutes away that will be able to rework my Berk CBE so it mates up with the Boosted Perfomance turbo kit Happy, happy, happy! wheee!, docaam, Mr&Mrs and 1 others like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z Last edited by GaleForce; 12-14-2012 at 08:29 AM.

12-14-2012, 11:21 AM	#15 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 59 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40183	Looking Good! Can't wait to see the finished front end! GaleForce likes this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Z Build	pwrhsms	Member's 370Z Gallery	43	09-09-2013 11:35 AM
Possible Nos build	triadz	Forced Induction	7	04-06-2012 10:30 AM
TT build in Fl	travnflorida	Nissan 370Z General Discussions	3	08-15-2011 05:51 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 05:24 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM