GaleForce's build

GaleForce · 01-30-2013, 10:17 PM

Quote:

Originally Posted by G37Sam

Congrats!

I would recommend going with 3.5" if you're going for a single exit. Looking forward to the outcome

Yeah, you're right, thanks.

I am just worried about the clearance. I might have to pass on this option then.

Nut_N_Much · 01-31-2013, 09:36 AM

Beautiful, its good to see it all come together. The stance is amazing..

GaleForce · 01-31-2013, 01:20 PM

Quote:

Originally Posted by Nut_N_Much

Beautiful, its good to see it all come together. The stance is amazing..

Slowly

So far today, I started it up again. Leak is fixed. Oil is topped up (it takes a crap ton of oil now). And it's too cold to get the oil temp gauge to move off of 50˚c. I do know that the gauge is seeing the sending unit, so that's a good sign.

GaleForce · 02-01-2013, 08:25 AM

Here's the first start up video. Nothing too exciting...

Mitco39 · 02-01-2013, 08:47 AM

Nice, I really do like those gauges you went with!

m3chhawk · 02-01-2013, 05:46 PM

Was the install easy enough (room under the car, etc..) just using the race ramps?

Nut_N_Much · 02-01-2013, 07:49 PM

Congrats man.. Looks nice, real clean install.. Good job..

GaleForce · 02-01-2013, 09:28 PM

Quote:

Originally Posted by Mitco39

Nice, I really do like those gauges you went with!

Thanks. I like them too. I still need to set up the warning points.

Quote:

Originally Posted by m3chhawk

Was the install easy enough (room under the car, etc..) just using the race ramps?

I ended up putting the car on jack stands figuring I could gain a little more space that might needed. I can't think of a time where I thought I needed a lift to do this job.

Quote:

Originally Posted by Nut_N_Much

Congrats man.. Looks nice, real clean install.. Good job..

Thanks bud

valpozguy · 02-01-2013, 10:06 PM

Awesome!

Sent from my SAMSUNG-SGH-I717 using Xparent BlueTapatalk 2

happytheman · 02-02-2013, 12:56 AM

Damn that looks and sounds like a beast! Very interested to see some numbers.

In the meantime, while you were building a beast I saw this config and when asked why vlan 176 didn't work..I laughed!

( Click to show/hide )

GaleForce · 02-02-2013, 08:04 AM

Quote:

Originally Posted by happytheman

Damn that looks and sounds like a beast! Very interested to see some numbers.

In the meantime, while you were building a beast I saw this config and when asked why vlan 176 didn't work..I laughed!

( Click to show/hide )

All I got out of that spoiler was some poor port was getting violated.

Cell · 02-02-2013, 09:29 AM

what did you do to get the three middle gauges installed?

Boosted Performance · 02-02-2013, 10:45 AM

Looking good Jason. The car is almost ready for the a show.

The base map is looking solid as well, fired right up the the a/f ratio is bang on for idle. Let me know when you plan on getting the tune done, maybe there is something I can help with

.

simota1 · 02-02-2013, 12:50 PM

Quote:

Originally Posted by GaleForce

Here are more shots to show camber/fitment that some were wondering about,

IMG_7320 by J M Gale, on Flickr

IMG_7358 by J M Gale, on Flickr

I just think this one is cool,

IMG_7373 by J M Gale, on Flickr

beautiful man

love the wheels man!!!!!

GaleForce · 02-02-2013, 01:07 PM

Quote:

Originally Posted by Cell

what did you do to get the three middle gauges installed?

You need to remove the entire dash to do it properly. Then you need to figure out a way to make the gauges fit. There is no easy way to do this and everyone could do it differently depending on the gauges. I made an aluminum bracket the used the holes from the factory gauge mount. Removed the hats from the gauge surrounds, then I needed to cut 70% of the plastic out of the gauge surrounds. For secure mounting i used a combination of hose clamp and fabricated bracket attached to the gauge then attached to the original aluminum bracket that I installed. This allows me to remove the gauge incase of failure without removing the dash again. Finished with securing the hoods to the gauge surround with silicone.

I would have done it very differently if my gauges were thin.

01-31-2013, 09:36 AM	#392 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	Beautiful, its good to see it all come together. The stance is amazing.. GaleForce likes this.

02-01-2013, 08:25 AM	#394 (permalink)
GaleForce A True Z Fanatic Join Date: Aug 2011 Location: Ontario, Canada Posts: 21,749 Drives: Varis Arising II Rep Power: 51864	Here's the first start up video. Nothing too exciting... Megan370z, esfourteen, Mr&Mrs and 2 others like this. __________________ >>>GaleForce's Build<<< >>>FaceBook @3GsCustoms<<<>>>Instagram @GaleForce370z<<< Varis Kamikaze-Z

02-01-2013, 08:47 AM	#395 (permalink)
Mitco39 A True Z Fanatic Join Date: Aug 2012 Location: Edmonton Alberta Canada Posts: 2,089 Drives: 40th 370z Rep Power: 131	Nice, I really do like those gauges you went with! __________________ 2007 Chevy Duramax - EFILive Tuned By Me 2010 40th W/ Nav - Boosted Performance - UpRev Tuned By Me The Mrs. Ride -2012 335XI N55 BMW - Cobb Tuned By Me, Built by her My Build --> http://www.the370z.com/members-370z-...39s-build.html

02-02-2013, 12:56 AM	#400 (permalink)
happytheman A True Z Fanatic Join Date: Apr 2010 Location: Florida Posts: 10,737 Drives: MB 6M Tour/Sport Z34 Rep Power: 1822	Damn that looks and sounds like a beast! Very interested to see some numbers. In the meantime, while you were building a beast I saw this config and when asked why vlan 176 didn't work..I laughed! ( Click to show/hide ) __________________ --Brantly-- *PowderCoating by Mike/Stillen/PWJDM/Shine Auto/NST* GTR/Michelin /Fast Intentions/Evo-R/Mobil 1/Motul/Z1 https://facebook.com/CentralFloridaZClub Last edited by happytheman; 02-02-2013 at 01:04 AM.

02-02-2013, 10:45 AM	#403 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	Looking good Jason. The car is almost ready for the a show. The base map is looking solid as well, fired right up the the a/f ratio is bang on for idle. Let me know when you plan on getting the tune done, maybe there is something I can help with . GaleForce likes this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

02-01-2013, 05:46 PM	#396 (permalink)
m3chhawk Track Member Join Date: Sep 2012 Location: Kansas City Posts: 878 Drives: '11 370Z SPT 6MT BLK Rep Power: 24	Was the install easy enough (room under the car, etc..) just using the race ramps?

02-01-2013, 07:49 PM	#397 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	Congrats man.. Looks nice, real clean install.. Good job..

02-01-2013, 10:06 PM	#399 (permalink)
valpozguy Track Member Join Date: Feb 2012 Location: valparaiso Posts: 501 Drives: 09 z Rep Power: 16	Awesome! Sent from my SAMSUNG-SGH-I717 using Xparent BlueTapatalk 2

02-02-2013, 09:29 AM	#402 (permalink)
Cell A True Z Fanatic Join Date: Jan 2010 Location: Chicago Posts: 1,449 Drives: A Garbage Truck Rep Power: 21	what did you do to get the three middle gauges installed?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Z Build	pwrhsms	Member's 370Z Gallery	43	09-09-2013 11:35 AM
Possible Nos build	triadz	Forced Induction	7	04-06-2012 10:30 AM
TT build in Fl	travnflorida	Nissan 370Z General Discussions	3	08-15-2011 05:51 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 05:24 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM