Madwi's picture dump and crap

madwi · 07-29-2017, 02:33 PM

cool see ya soon.

P's_Z · 07-29-2017, 04:36 PM

Thanks for the close up pic of the b pillar, i was thinking of doing that also...

Btw, i have that same shirt from blipshift

madwi · 08-13-2017, 03:23 PM

EW installed a new Pioneer 2330Nex in the Z.

Amps were moved from the hatch to under the seats. Most time consuming was re-routing all the wires yesterday, took forever

madwi · 08-13-2017, 03:24 PM

I think the 4100 is going into the Fit and I am going to make that my good audio car.

more room and I dont care if it is weighed down with audio crap.

madwi · 08-15-2017, 07:10 PM

This project has been on hold for a while now, so it might be time to put a little effort into it. Raspberry Pi and 5" touch screen for the cubby area.

madwi · 08-16-2017, 07:01 AM

Well, my favorite tree has to come down.

We had a storm come through last week and it took a big limb off. One of the main runners cracked so bad I can see light through it. Sucks, gave me really good shade when working on the driveway. Not to mention the awesome yellow and red leaves in the fall.
Tree guys came out yesterday and took down a lot of the upper branches. They are coming back today to finish up. I think I am going to bandsaw up a few of the logs and cure them for a couple of years and turn them into shelves or something

madwi · 08-17-2017, 07:39 AM

Tree is down and my must do list this weekend just grew, a lot.

Will have to split it all and stack it.

eastwest2300 · 08-17-2017, 11:24 AM

Quote:

Originally Posted by madwi

EW installed a new Pioneer 2330Nex in the Z.

Amps were moved from the hatch to under the seats. Most time consuming was re-routing all the wires yesterday, took forever

The deck install was easy, the rewire was painus.. painus to the max.

eastwest2300 · 08-17-2017, 11:25 AM

Quote:

Originally Posted by madwi

Tree is down and my must do list this weekend just grew, a lot.

Will have to split it all and stack it.

madwi · 08-17-2017, 06:13 PM

Yeah I have to get the wood splitter out of the garage which requires moving your car, which requires me to move a bunch of those logs.

JARblue · 08-18-2017, 02:30 AM

Seems like the easiest thing would be to just set it all on fire where it lays

madwi · 08-18-2017, 03:09 AM

Quote:

Originally Posted by JARblue

Seems like the easiest thing would be to just set it all on fire where it lays

I like the way you think.

eastwest2300 · 08-18-2017, 10:55 AM

Quote:

Originally Posted by madwi

Yeah I have to get the wood splitter out of the garage which requires moving your car, which requires me to move a bunch of those logs.

madwi · 08-25-2017, 07:39 PM

I was hoping the 7" screen would fit without a lot of modification but that is a no go. Going to have to use the 5" screen and make a bezel for it.

7" screen

5"screen

madwi · 08-27-2017, 11:39 AM

4 day weekend and it was spent working every single day.

I did catch the mayweather fight last night though so that was cool. Today I decided I might as well work in the garage for a bit.

Put the bumper on and lined it up as well as I can. Now off to the body shop and they can make it fit as best as possible.

07-29-2017, 04:36 PM	#77 (permalink)
P's_Z A True Z Fanatic Join Date: Apr 2013 Location: PR Posts: 1,530 Drives: Zeta Rep Power: 467	Thanks for the close up pic of the b pillar, i was thinking of doing that also... Btw, i have that same shirt from blipshift madwi likes this. __________________ Zeta

08-13-2017, 03:23 PM	#78 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,389 Drives: Granma red Z Rep Power: 2684427	EW installed a new Pioneer 2330Nex in the Z. Amps were moved from the hatch to under the seats. Most time consuming was re-routing all the wires yesterday, took forever eastwest2300, gbrettin, GaleForce and 4 others like this.

08-13-2017, 03:24 PM	#79 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,389 Drives: Granma red Z Rep Power: 2684427	I think the 4100 is going into the Fit and I am going to make that my good audio car. more room and I dont care if it is weighed down with audio crap. Rusty and Hotrodz like this.

08-15-2017, 07:10 PM	#80 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,389 Drives: Granma red Z Rep Power: 2684427	This project has been on hold for a while now, so it might be time to put a little effort into it. Raspberry Pi and 5" touch screen for the cubby area. gbrettin, Rusty, Hotrodz and 3 others like this.

08-16-2017, 07:01 AM	#81 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,389 Drives: Granma red Z Rep Power: 2684427	Well, my favorite tree has to come down. We had a storm come through last week and it took a big limb off. One of the main runners cracked so bad I can see light through it. Sucks, gave me really good shade when working on the driveway. Not to mention the awesome yellow and red leaves in the fall. Tree guys came out yesterday and took down a lot of the upper branches. They are coming back today to finish up. I think I am going to bandsaw up a few of the logs and cure them for a couple of years and turn them into shelves or something Rusty, axmea?, Hotrodz and 2 others like this.

07-29-2017, 02:33 PM	#76 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,389 Drives: Granma red Z Rep Power: 2684427	cool see ya soon.

08-17-2017, 07:39 AM	#82 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,389 Drives: Granma red Z Rep Power: 2684427	Tree is down and my must do list this weekend just grew, a lot. Will have to split it all and stack it. Rusty, axmea?, Hotrodz and 2 others like this.

08-17-2017, 06:13 PM	#85 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,389 Drives: Granma red Z Rep Power: 2684427	Yeah I have to get the wood splitter out of the garage which requires moving your car, which requires me to move a bunch of those logs. eastwest2300, Rusty and Hotrodz like this.

08-18-2017, 02:30 AM	#86 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 42 Posts: 36,322 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684439	Seems like the easiest thing would be to just set it all on fire where it lays madwi likes this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

08-25-2017, 07:39 PM	#89 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,389 Drives: Granma red Z Rep Power: 2684427	I was hoping the 7" screen would fit without a lot of modification but that is a no go. Going to have to use the 5" screen and make a bezel for it. 7" screen 5"screen gbrettin, Hotrodz and cigarclifford like this.

08-27-2017, 11:39 AM	#90 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,389 Drives: Granma red Z Rep Power: 2684427	4 day weekend and it was spent working every single day. I did catch the mayweather fight last night though so that was cool. Today I decided I might as well work in the garage for a bit. Put the bumper on and lined it up as well as I can. Now off to the body shop and they can make it fit as best as possible. gbrettin, Rusty, Hotrodz and 2 others like this.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Open Dump exhaust	Wabbyyy	Intake/Exhaust	14	10-04-2019 10:02 AM
Gen Coupe dump 4turbo	7speed	Other Vehicles	17	07-29-2014 09:58 AM
ECU Dump ?'s	ZScr3am	Tuning	2	10-27-2012 04:40 PM
ECU dump turnaround time	SS_Firehawk	Tuning	9	05-07-2012 08:36 PM
My Beltronics RX65 Took a Dump!	Rhinetom	Nissan 370Z General Discussions	12	01-07-2011 10:45 AM