A new turbo....PTE's 6870

Boosted Performance · 11-11-2014, 12:38 AM

Just thought post this up here....

As I had mentioned in another post, I attended the SEMA show last week (for the first time

). Some great cars out there, and some incredible new technologies in the after-market performance world.

The one thing I really wanted to see was the new turbo at Precision's booth, a 68mm compressor and 70mm turbine unit rated at 1,100 HP. It is a very nice turbo, and although it is not available with a twin scroll turbine yet, it will still pack a hell of a punch with the tangential housing. The best part is that it will be compatible with the all new Boosted Performance V 2.0 kit. Since it comes with a large 70mm turbine wheel, it will be a great match for the VQ37VHR especially for those of you that really want to get the most power out of built engines on E85.

More details can be found here:

http://www.precisionturbo.net/news/P...r-Released/284

G37sHKS · 11-11-2014, 09:25 AM

Please make turbo kit for AT!

TerribleONE · 11-11-2014, 10:02 AM

Very nice

BBRSpeedWorks · 11-11-2014, 10:33 AM

Nice sasha...you went all the way to sema to see the turbo??...if so hell ya dedication. Love it...that will be one hell of an upgrade for your kit...

Juan@Fontana · 11-11-2014, 10:34 AM

this is going to get really juicy really quick!

Boosted Performance · 11-11-2014, 10:49 AM

Quote:

Originally Posted by G37sHKS

Please make turbo kit for AT!

There just isn't enough room under the car for all the plumbing. The oil pan is huge and takes up a lot of real estate.

Quote:

Originally Posted by BBRSpeedWorks

Nice sasha...you went all the way to sema to see the turbo??...if so hell ya dedication. Love it...that will be one hell of an upgrade for your kit...

That would be a bit of a waste of time/money. The primary reason for the trip was to find/talk to fabrication shops that would be able to take on mass production of this kit. I really wanted to see their work in person, and I did walk away impressed after talking to 4 potential candidates.

Quote:

Originally Posted by Juan@Fontana

this is going to get really juicy really quick!

Yes, this turbo should really set the bar high. It already made 1,059 WHP on the 2JZ....although that was "all in". I would expect this turbo to get well over the 800whp mark on a properly built VQ37VHR and E85.

The twin scroll will be released soon as well...and I just have to make 100% sure it fits with the largest turbine housing.

BBRSpeedWorks · 11-11-2014, 10:53 AM

Congrats sasha...good luck...

Boosted Performance · 12-04-2014, 08:11 AM

This beast is now available with a twin scroll configuration:

http://www.precisionturbo.net/news/P...-Available/288

I will order one of these right away, and take a lot of measurements just to make sure the turbine outside dimensions will work with the VHR V 2.0 kit.

I know for a fact that the tangential (non twin scroll) turbine will work, but the twin scroll would be ideal.

wheee! · 12-04-2014, 08:40 AM

That's one purty turbo!

Mr.Squeeze · 12-04-2014, 12:49 PM

Quote:

Originally Posted by Boosted Performance

This beast is now available with a twin scroll configuration:

http://www.precisionturbo.net/news/P...-Available/288

I will order one of these right away, and take a lot of measurements just to make sure the turbine outside dimensions will work with the VHR V 2.0 kit.

I know for a fact that the tangential (non twin scroll) turbine will work, but the twin scroll would be ideal.

As soon as you find out Sasha let me know I'm really thinking about using this instead of the 6766 you sent me .

jwick · 12-04-2014, 12:51 PM

Quote:

Originally Posted by Mr.Squeeze

As soon as you find out Sasha let me know I'm really thinking about using this instead of the 6766 you sent me .

jwick · 12-04-2014, 12:52 PM

Sasha - What A/R are you thinking? Sticking with 1.15 or something different?

Boosted Performance · 12-04-2014, 12:58 PM

Quote:

Originally Posted by Mr.Squeeze

As soon as you find out Sasha let me know I'm really thinking about using this instead of the 6766 you sent me .

Will do. I send an email to Precision this morning, asking about the outside dimensions. I don't see it being a problem, since the turbine wheel is only 4mm's (3/16") larger. I can't see the turbine being any different.

Quote:

Originally Posted by jwick

Sasha - What A/R are you thinking? Sticking with 1.15 or something different?

For built engines, 1.32 a/r is ideal. Stock block 1.0 a/r would do, but I would suggest 1.15 a/r.

jwick · 12-04-2014, 01:22 PM

Quote:

Originally Posted by Boosted Performance

Will do. I send an email to Precision this morning, asking about the outside dimensions. I don't see it being a problem, since the turbine wheel is only 4mm's (3/16") larger. I can't see the turbine being any different.

For built engines, 1.32 a/r is ideal. Stock block 1.0 a/r would do, but I would suggest 1.15 a/r.

Why would one run this setup on a stock block? The 6266 will produce way more boost than the stock block can handle.

Boosted Performance · 12-04-2014, 01:38 PM

Quote:

Originally Posted by jwick

Why would one run this setup on a stock block? The 6266 will produce way more boost than the stock block can handle.

Very true. The 6266 is capable of 600-650whp on pump.

There may be customers that are looking to build the engine if they get bored with 600whp. For those, this may be the turbo of choice right from the get go. Perhaps just upgrade the turbine when the times comes.

11-11-2014, 12:38 AM	#1 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	A new turbo....PTE's 6870 Just thought post this up here.... As I had mentioned in another post, I attended the SEMA show last week (for the first time ). Some great cars out there, and some incredible new technologies in the after-market performance world. The one thing I really wanted to see was the new turbo at Precision's booth, a 68mm compressor and 70mm turbine unit rated at 1,100 HP. It is a very nice turbo, and although it is not available with a twin scroll turbine yet, it will still pack a hell of a punch with the tangential housing. The best part is that it will be compatible with the all new Boosted Performance V 2.0 kit. Since it comes with a large 70mm turbine wheel, it will be a great match for the VQ37VHR especially for those of you that really want to get the most power out of built engines on E85. More details can be found here: http://www.precisionturbo.net/news/P...r-Released/284 G37sHKS, gbrettin, BBRSpeedWorks and 1 others like this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

11-11-2014, 09:25 AM	#2 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 20	Please make turbo kit for AT! EZT, FPenvy, Nut_N_Much and 2 others like this. __________________ G37 BUILD UNDER CONSTRUCTION

11-11-2014, 10:02 AM	#3 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Very nice __________________ 638WHP 541WTQ @ 13.5PSI Build thread

11-11-2014, 10:33 AM	#4 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	Nice sasha...you went all the way to sema to see the turbo??...if so hell ya dedication. Love it...that will be one hell of an upgrade for your kit... __________________ God'Z Gift.

11-11-2014, 10:53 AM	#7 (permalink)
BBRSpeedWorks Premium Member Join Date: Dec 2013 Location: Ft. Stwart Posts: 366 Drives: 370z,350z,300z,talon Rep Power: 11	Congrats sasha...good luck... __________________ God'Z Gift.

11-11-2014, 10:34 AM	#5 (permalink)
Juan@Fontana Enthusiast Member Join Date: Nov 2013 Location: Fontana Posts: 315 Drives: Z32 Rep Power: 21	this is going to get really juicy really quick!

12-04-2014, 08:11 AM	#8 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3382	This beast is now available with a twin scroll configuration: http://www.precisionturbo.net/news/P...-Available/288 I will order one of these right away, and take a lot of measurements just to make sure the turbine outside dimensions will work with the VHR V 2.0 kit. I know for a fact that the tangential (non twin scroll) turbine will work, but the twin scroll would be ideal. TerribleONE likes this. __________________ 750WHP starting @ $7,500 to the door FOR DETAILS VISIT: http://www.the370z.com/members/boosted-performance.html FB: https://www.facebook.com/Boosted-Per...6303179791462/ IG @boostedperformanceyeg

12-04-2014, 08:40 AM	#9 (permalink)
wheee! A True Z Fanatic Join Date: Sep 2009 Location: Mod Capital of Canada Age: 57 Posts: 7,354 Drives: cars. lots of cars. Rep Power: 40181	That's one purty turbo! gbrettin and KratikosG37 like this. __________________ H&R / Stillen / Berk / HKS / Swift / Michelin / UpRev / SPC / Amuse Rep / Seibon / Fringe XVO / TWM / more... My Journal

12-04-2014, 12:52 PM	#12 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Sasha - What A/R are you thinking? Sticking with 1.15 or something different? __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ATi XFX 6870 Graphics Card	bigaudiofanat	Misc Items for sale (No Z stuff)	2	11-26-2014 09:00 AM
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
[FOR SALE] HKS 6th Gen EVC Turbo Boost Controller and PLX Devices Turbo Sensors Gauges	modme	Parts for sale (Private Classifieds)	17	03-20-2014 04:03 PM
turbo, Twin Turbo or Supercharged	nmanfredi43	Engine & Drivetrain	16	02-14-2012 12:59 PM