Fast Intentions "Twin Turbo Kit" is here

98intrigue · 02-14-2013, 12:13 PM

Quote:

Originally Posted by F.I. Inc.

Update,

We have "brand new" Mickey Thompson E.T. Street Radials on the way.

We have the Turbosmart E Boost 2 on the way. (Electronic Boost Controller)

We are headed back to the dyno next Tuesday February 19th for another session. We are confident that we have the fuel pressure drop off solved. If this holds true, we will be able to turn up the boost and see what the car can put down on the Stage 1+ kit w/103 octane.

Our plan is to head back to the track next Friday February 22nd to see what we can run.

Stay tuned...

I hope to hear of a record breaking night for a manual transmission VQ37 motor... With the way the car ran the other night, I can certainly see a new record possible.

TerribleONE · 02-14-2013, 12:21 PM

Quote:

Originally Posted by SS_Firehawk

It has base brakes on the video's

good eye

Quote:

Originally Posted by Nixlimited

D'oh. It may be hard to find small diameter rims for the sport...

In related news, that car is gonna need some upgraded brakes with that TT kit!

I think you would be very hard pressed to get any smaller than 18s on the sport brakes.. anyone know if 17s fit over the rears? I have a akebono BBK with Z1 rotors and endless pads ready to go on however we waited on installing them so we would be able to run the 16s.

TerribleONE · 02-14-2013, 12:22 PM

Quote:

Originally Posted by 98intrigue

I hope to hear of a record breaking night for a manual transmission VQ37 motor... With the way the car ran the other night, I can certainly see a new record possible.

This is our goal and I am very confident these guys can make it happen!

TerribleONE · 02-14-2013, 12:31 PM

Boost controller arrived! Only if everything would ship so fast!

also a little BOV/dyno pull videos that I took personally with my gopro. The camera is in the case with the waterproof door on so some sound was lost but if you turn it up it should get your hair to stand up (it did for me)

LukasC · 02-14-2013, 01:18 PM

That sounds so good!

XwChriswX · 02-14-2013, 02:22 PM

Just curious about the fact all of the dyno vids I've seen have the front bumper off...

How is the filters being in that location going to work with the bumper on? (Assuming OEM bumper) won't they be somewhat stifled in that location and not get as much air?

A Zele or Stillen front clip would solve that problem.

Sh0velMan · 02-14-2013, 02:32 PM

Quote:

Originally Posted by XwChriswX

Just curious about the fact all of the dyno vids I've seen have the front bumper off...

How is the filters being in that location going to work with the bumper on? (Assuming OEM bumper) won't they be somewhat stifled in that location and not get as much air?

A Zele or Stillen front clip would solve that problem.

You have to take out the side shields, so plenty of air will slip past into that area.

That said, Zele would be great, Stillen at least better than stock.

XwChriswX · 02-14-2013, 02:34 PM

Quote:

Originally Posted by Sh0velMan

You have to take out the side shields, so plenty of air will slip past into that area.

That said, Zele would be great, Stillen at least better than stock.

Ah okay, I was expecting there to be some reasoning for this, I didn't know parts would be removed.

Agreed, I'm going by way of Zele when the time comes for body work.

FPenvy · 02-14-2013, 02:36 PM

Quote:

Originally Posted by XwChriswX

Ah okay, I was expecting there to be some reasoning for this, I didn't know parts would be removed.

Agreed, I'm going by way of Zele when the time comes for body work.

popping off those little blocking plates in the bumper was the first thing i did after i got my intakes on.

XwChriswX · 02-14-2013, 02:37 PM

Quote:

Originally Posted by FPenvy

popping off those little blocking plates in the bumper was the first thing i did after i got my intakes on.

Even though they don't inhibit your filter's location??

TopgunZ · 02-14-2013, 02:38 PM

The carbon signal raptor would feed it some mad air too.

FPenvy · 02-14-2013, 02:40 PM

Quote:

Originally Posted by XwChriswX

Even though they don't inhibit your filter's location??

better airflow without them i feel so i took them off. they come off with like 3 or 4 screws each. took 2 minutes.

KaienZ34 · 02-14-2013, 02:41 PM

He has a full amuse kit painted and ready to go.

G37Sam · 02-14-2013, 02:43 PM

This thread just keeps getting better!! Some records will be broken very soon!

XwChriswX · 02-14-2013, 02:44 PM

Quote:

Originally Posted by KaienZ34

He has a full amuse kit painted and ready to go.

Even though the amuse doesn't really have much venting into the side areas, that's still cool to have in your back pocket ready to go.

02-14-2013, 12:31 PM	#424 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Boost controller arrived! Only if everything would ship so fast! also a little BOV/dyno pull videos that I took personally with my gopro. The camera is in the case with the waterproof door on so some sound was lost but if you turn it up it should get your hair to stand up (it did for me) 98intrigue and Nut_N_Much like this. __________________ 638WHP 541WTQ @ 13.5PSI Build thread Last edited by TerribleONE; 02-14-2013 at 12:47 PM.

02-14-2013, 01:18 PM	#425 (permalink)
LukasC Track Member Join Date: Apr 2011 Location: San Antonio, Tx Posts: 664 Drives: 11 Stillen SC Bl M6 Rep Power: 17	That sounds so good! TerribleONE likes this.

02-14-2013, 02:22 PM	#426 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	Just curious about the fact all of the dyno vids I've seen have the front bumper off... How is the filters being in that location going to work with the bumper on? (Assuming OEM bumper) won't they be somewhat stifled in that location and not get as much air? A Zele or Stillen front clip would solve that problem. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

02-14-2013, 02:41 PM	#433 (permalink)
KaienZ34 A True Z Fanatic Join Date: Oct 2009 Location: LA. not L.a. Posts: 21,652 Drives: Z34 Tour/Sport Rep Power: 177	He has a full amuse kit painted and ready to go. TerribleONE, XwChriswX and FPenvy like this.

02-14-2013, 02:43 PM	#434 (permalink)
G37Sam A True Z Fanatic Join Date: Dec 2008 Location: Dubai, UAE Posts: 1,507 Drives: RB'd G37 Rep Power: 20	This thread just keeps getting better!! Some records will be broken very soon! TerribleONE likes this. __________________ '14 Viper GTS '08 RB'd G37S - Sold

02-14-2013, 02:38 PM	#431 (permalink)
TopgunZ A True Z Fanatic Join Date: Jun 2012 Location: Minneapolis Posts: 2,651 Drives: 06 350Z , 09 370Z MT Rep Power: 6833	The carbon signal raptor would feed it some mad air too.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fast Intentions 3" (Twin Turbo) exhaust is here!	F.I. Inc.	Intake/Exhaust	91	02-08-2017 05:09 AM
Fast Intentions "Twin Turbo Kit" Official Release	F.I. Inc.	Drivetrain/Engine	95	11-19-2014 11:38 PM
Twin Turbo vs. Single Turbo V6: A Dissertation	Mike@GTM	Forced Induction	115	08-14-2014 09:04 PM
Twin scroll vs twin turbo	SS_Firehawk	Forced Induction	32	04-13-2014 12:02 PM
GTM Motorsports Twin Turbo vs Greddy Twin Turbo Kit	Nismo221	Forced Induction	57	08-16-2011 04:44 PM

*****Fast Intentions "Twin Turbo Kit" is here*****

Fast Intentions "Twin Turbo Kit" is here