FI with continous high speed driving 130MPH+

Originally Posted by phunk

I sustain over 130 regularly. I do not have a large oil cooler, and the one that I do have is behind the intercooler. My oil temps can hit 220-230 if I hold it up there for a while on nights that arent very cool weather. At the higher speeds, the airflow increases a lot. I am not sure to what ratio that offsets the higher sustained RPM, but it definitely helps. Up to 175-180 I have not had my oil temps go out of control, but the longest I have sustained that type of speed in the 370z is just for a minute or two.

As far as oil cooling goes, I think you just want to get on the larger end of the typical spectrum. People that are road racing will probably tax their oil temp just as much if not more, as they are all over the place on RPM and have less airflow due to lower speeds, and they are making max power more frequently as they constantly have to slow down then reaccelerate. I dont think that sustaining the high speeds is going to really hit you hard on oil temps compared to a road racer.

I cant recall the size of my oil cooler, but you can just see the top of it behind the intercooler on the driver side (LHD). It wasnt a kit, I just bought the parts.

Originally Posted by 2011 Nismo#91

I don't know about German cars but I don't think any production car engine is meant to sustain high speeds (high loads) not to mention a NA car modded to FI. But good luck to you. And if you can post a video of a station wagon passing you at 130

With Standard Gear ratios RPMs
130 = 4800 6th
165 = 6000 6th