Stillen SC Build 500 WHP?

ANMVQ · 10-11-2012, 12:02 PM

Quote:

Originally Posted by Lug

Sounds like you just brought me some more good luck....THANKS!

AHHAHA go play the lottery. Just make sure you cut me in the WINNINGS

Lug · 10-11-2012, 02:44 PM

Quote:

Originally Posted by ANMVQ

AHHAHA go play the lottery. Just make sure you cut me in the WINNINGS

Just got back from my first dyno run on my new Ford Focus ST. I removed the top off the air intake box....GOT 501 WHP! WOOOHOOOOOO!

Osiris · 10-11-2012, 02:52 PM

Quote:

Originally Posted by Lug

Just got back from my first dyno run on my new Ford Focus ST. I removed the top off the air intake box....GOT 501 WHP! WOOOHOOOOOO!

i assume you're joking because those only make 252HP crank. Unless you've modified it?

Lug · 10-11-2012, 09:07 PM

Quote:

Originally Posted by Osiris

i assume you're joking because those only make 252HP crank. Unless you've modified it?

Top off the air intake box.....plus I added some performance stickers and some carbon fiber overlays! :totallyseriousSmilie:

EVOHUNTER · 10-17-2012, 09:37 AM

hey, did u get a tune after you had pulleys added and the extra boost?
this would cause crazy lean conditions.

ANMVQ · 10-17-2012, 11:25 AM

Quote:

Originally Posted by EVOHUNTER

hey, did u get a tune after you had pulleys added and the extra boost?
this would cause crazy lean conditions.

Car would go lean on the dyno,. Trying to tune it, I was told he would make as rich as he could and as soon as it went into boost , would go crazy lean., I still really have no driven the car, Only time I was in is was from the last dealer home, I hit no boost and drove no more than 55 all the way home 25 mins or so. No matter what he does with the tune it just goes lean. At idle the car is super rich, It will throw a rich code, At WOT and boosting, it goes the other way 24/1 lean

ANMVQ · 10-22-2012, 10:41 AM

Quick update the Wally in the car was a GSS317 and the feed line was either the wrong kind of hose or installed wrong as it split at the hose clap and was bleeding pressure out. They are installing a DW300 and a new fuel line, We'll see, CROSSED FINGERSS big time,

ANMVQ · 10-22-2012, 01:13 PM

So the lean issue is all set, But now will not make more than 3PSI at WOT, I'm going back to the stillen set upi amd messing with the cogs when I have the time, Just one issue after another, FN car

Nissan370 · 10-23-2012, 06:21 AM

dude stop playing around and get this beast running remember we got a race to 500rwhp going on lol

ANMVQ · 10-23-2012, 09:21 AM

Quote:

Originally Posted by Nissan370

dude stop playing around and get this beast running remember we got a race to 500rwhp going on lol

LOL Going to Jimmy at The Shop CT, Auto transport is picking the car up tomorrow I hope, Will be at Jimmys on Thursday, Not even looking for the 500WHP any more , LOL can it just run

G37sHKS · 10-23-2012, 01:05 PM

please don't quite man.. you're almost there!

ANMVQ · 10-23-2012, 01:35 PM

I know, Just getting frustrated, Heard some promising things on the phone from Jimmy @ the Shop, I was just telling him what the car was doing and the mods I have, We'll see,

Nissan370 · 10-23-2012, 07:40 PM

question for u what part of the 350z vortech idler assembly do i need
i got the cog pulleys and the gates belt but not sure on what parts of the idler assembly i need thxs

ANMVQ · 10-25-2012, 06:26 PM

I thing its on one of my post here. I don't have the paper anymore. ;( long bad story . but car is running made 10 PSI Stillen puppies. cogs are off and Stillen. BPV. Dyno is in the am.

weiboy718 · 10-25-2012, 06:44 PM

Dafug did you just say? STILLEN puppies or STILLEN pulleys? It's a huge difference lol.

10-17-2012, 09:37 AM	#275 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 14	hey, did u get a tune after you had pulleys added and the extra boost? this would cause crazy lean conditions. __________________

10-22-2012, 10:41 AM	#277 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	Quick update the Wally in the car was a GSS317 and the feed line was either the wrong kind of hose or installed wrong as it split at the hose clap and was bleeding pressure out. They are installing a DW300 and a new fuel line, We'll see, CROSSED FINGERSS big time, __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

10-22-2012, 01:13 PM	#278 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	So the lean issue is all set, But now will not make more than 3PSI at WOT, I'm going back to the stillen set upi amd messing with the cogs when I have the time, Just one issue after another, FN car __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

10-23-2012, 06:21 AM	#279 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	dude stop playing around and get this beast running remember we got a race to 500rwhp going on lol __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

10-23-2012, 01:05 PM	#281 (permalink)
G37sHKS A True Z Fanatic Join Date: Feb 2010 Location: Dubai Posts: 1,183 Drives: 09 G37S Coupe 7AT Rep Power: 20	please don't quite man.. you're almost there! __________________ G37 BUILD UNDER CONSTRUCTION

10-23-2012, 01:35 PM	#282 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	I know, Just getting frustrated, Heard some promising things on the phone from Jimmy @ the Shop, I was just telling him what the car was doing and the mods I have, We'll see, __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

10-23-2012, 07:40 PM	#283 (permalink)
Nissan370 Enthusiast Member Join Date: Feb 2011 Location: Baltimore Posts: 431 Drives: 2009 ST BLK 370Z Rep Power: 14	question for u what part of the 350z vortech idler assembly do i need i got the cog pulleys and the gates belt but not sure on what parts of the idler assembly i need thxs __________________ 370z vsr motorsports single turbo/built motor 9.1cr 525rwhp/450rwtq @ 10.5psi (stock maf maxed out)

10-25-2012, 06:26 PM	#284 (permalink)
ANMVQ A True Z Fanatic Join Date: Mar 2011 Location: Framingham MA Posts: 2,732 Drives: 2014 Q50 AWD Rep Power: 19	I thing its on one of my post here. I don't have the paper anymore. ;( long bad story . but car is running made 10 PSI Stillen puppies. cogs are off and Stillen. BPV. Dyno is in the am. __________________ 14 Q50 AWD, ARK, ECUTEK (SEB), Takda,

10-25-2012, 06:44 PM	#285 (permalink)
weiboy718 Track Member Join Date: May 2010 Location: Bay Area Posts: 923 Drives: Infiniti G37 Rep Power: 15	Dafug did you just say? STILLEN puppies or STILLEN pulleys? It's a huge difference lol.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Whitemtl370's Stillen SC Build Thread	Whitemtl370	Member's 370Z Gallery	5	05-07-2012 08:59 AM
stillen superchge build results	Nissan370	Forced Induction	68	02-13-2012 04:23 PM
[WTB] wtb nismo seats stillen g3 cai stillen headers and stillen exhaust	bloodvayne	Parts for sale (Private Classifieds)	1	12-18-2011 09:25 PM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM
The EXPENSIVE 370Z Build - Brembo, HRE, JIC, Stillen	vividracing	Member's 370Z Gallery	10	06-03-2009 12:37 AM