12-23-2012, 11:06 AM
|
#11 (permalink)
|
|
Base Member
Join Date: Feb 2012
Location: Ontario
Posts: 61
Drives: '10 Nissan 370Z M6
Rep Power: 13
|
Quote:
Originally Posted by Boosted Performance
Now that you now know that this kit does not work with the 7AT. I will try to do something about this in the spring/summer next year. If I can find the donor car, by all means I would do my best to make this happen. The manifold will have to be different for sure, and I am not sure if I can keep the twin scroll for it. The OEM 7AT oil pan is so large, and takes up a lot of valuable space under the car. I have been known to perform miracles though....so you never know.
|
Perhaps it would be easier to make a different oil pan for the auto trans? Or relocate most of it to the side or elsewhere? Integrate it to an oil cooler to give you the same volume of oil with a flatter trans oil pan? You'd need to know how deep in the oil pan parts of the valve body go. Never pulled off the pan on those trans and can't seem to find a decent photo of the trans so don't know if its feasible or not, just throwing it out there but I'm sure you've already thought about it.
|
|
|
Similar Threads
1038Likes
Threaded Mode
