Belt slippage after upgrading to SI trim and turbo guard filter

TopgunZ · 09-18-2020, 12:49 PM

Quote:

Originally Posted by Mariokart

Ok so I rerouted the supercharger belt correctly and the slip was exactly the same. After some inspection it turns out I'm getting slip on the serpentine belt (visable belt dust) . I have the additional Tbatt pulley and using Gates® K081088HD belt currently but doesn't seem to be enough. Any reccomendations? Possibly different tighter belt? I noticed the belt isn't super tight.

If your belt is slipping with the Tbatt upgrade and you have confirmed its serp side then either your belt is trashed or your auto tensioner has given out.

Mariokart · 09-23-2020, 08:58 AM

Quote:

Originally Posted by TopgunZ

If your belt is slipping with the Tbatt upgrade and you have confirmed its serp side then either your belt is trashed or your auto tensioner has given out.

Thank you mate, I'm going to replace both to be on the safe side. 👍

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New turbo guard pre-filter	Jinxx	Forced Induction	6	06-05-2019 03:01 PM
Turbo-Guard for Stillen build	redondoaveb	Forced Induction	11	10-25-2017 08:45 AM
[FOR SALE] OEM Center Console with Navigation trim/control panel/radio trim	370Z JT	Parts for sale (Private Classifieds)	5	03-04-2016 07:40 AM
Air filter - Fram CA10544 extra guard	zefaulter	Intake/Exhaust	39	07-06-2013 12:11 AM
Scheduled maintenance: belt, radiator cap, brake fluid, water pump, fuel filter, p/s	wdkwang	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	4	05-08-2012 10:57 AM